Flymo SimpliCut Li Handleiding

Flymo Heggenschaar SimpliCut Li

Lees hieronder de 📖 handleiding in het Nederlandse voor Flymo SimpliCut Li (9 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9

EN Operator’s manual

Battery Hedge Trimmer

SimpliCut Li 9679862-xx

Remark: “xx” stands for customer and country

variants. The basic product number is before the

hyphen.

Page 1 width 2 mm less: 208 mm

32014-85.960.02.indd 1

32014-85.960.02.indd 132014-85.960.02.indd 1 15.09.21 10:16

15.09.21 10:16

15.09.21 10:1615.09.21 10:16

Fold-out Page width 5 mm less: 205 mm

O3 O4

1 4

32014-85.960.02.indd 3

32014-85.960.02.indd 332014-85.960.02.indd 3 15.09.21 10:16

15.09.21 10:16

15.09.21 10:1615.09.21 10:16

EN Battery Hedge Trimmer

1. SAFETY 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. OPERATION 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. MAINTENANCE 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. STORAGE 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. TROUBLESHOOTING 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. TECHNICAL DATA 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7. ACCESSORIES 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8. SERVICE / WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Original instructions.

This product is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the product by a person

responsible for their safety. Children should be supervised to ensure that

they do not play with the product. The use of this product by young

people under the age of 16 is not recommended.

Intended use:

The FLYMO Hedge Trimmer is intended to cut hedges and shrubs in

private domestic gardens and allotments.

The product is not intended for long term use.

DANGER! Risk of injury!

v Do not use the product to cut lawns / lawn edges, to chop up

material or to make compost.

IMPORTANT!

Read the operator’s manual carefully before use and keep for future

reference.

Symbols on the product:

Read operator’s manual.

Always wear approved hearing protection.

Always wear approved eye protection.

Danger – Keep hands away from blade.

Do not expose to rain.

For the charger:

Remove plug from the mains immediately if the cable

is damaged or cut.

General safety warnings

General power tool safety warnings:

WARNING!

Read all safety warnings and all instructions! Failure to follow the warnings

and instructions may result in electric shock, fire and / or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains operated (corded)

power tool or battery operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adaptor plugs with earthed (grounded) power

tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

1. SAFETY

b) Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable

for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use

a residual current device (RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medication. A moment of inat-

tention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat,

or hearing protection used for appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and /or battery pack, picking up or

carrying the tool. Carrying power tools with your finger on the switch or

energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tools may result

in personal injury.

e) Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power source and /or the battery pack

from the power tool before making any adjustments, changing acces-

sories, or storing power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to oper-

ate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with

these instructions, taking into account the working conditions and

the work to be performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger specified by the manufacturer.

A charger that is suitable for one type of battery pack may create a risk of fire

when used with another battery pack.

b) Use power tools only with specifically designated battery packs.

Use of any other battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal

objects, like paper clips, coins, keys, nails, screws or other small

metal objects, that can make a connection from one terminal to

another. Shorting the battery terminals together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, flush with water.

If liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

6) Service

Have your power tool serviced by a qualified repair person using

only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

Page 2 width 2 mm less: 208 mm

32014-85.960.02.indd 4

32014-85.960.02.indd 432014-85.960.02.indd 4 15.09.21 10:16

15.09.21 10:16

15.09.21 10:1615.09.21 10:16

Product specificaties

Merk:	Flymo
Categorie:	Heggenschaar
Model:	SimpliCut Li

Heb je hulp nodig?

Als je hulp nodig hebt met Flymo SimpliCut Li stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heggenschaar Flymo

Flymo EasiCut 5500 Handleiding

10 Oktober 2023

Flymo Easycut 450 Handleiding

10 Oktober 2023

Flymo EasiCut 510 Handleiding

10 Oktober 2023

Flymo EasiCut 7000XT Handleiding

10 Oktober 2023

Flymo Sabre Cut Handleiding

10 Oktober 2023

Flymo Easicut 420 Handleiding

10 Oktober 2023

Flymo EasiCut Cordless 420 Handleiding

10 Oktober 2023

Flymo Easycut 600 XT Handleiding

10 Oktober 2023

Flymo Easycut 6000 XT Handleiding

10 Oktober 2023

Flymo EasiCut 500 Handleiding

6 September 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Cramer 82HD75 Handleiding

8 April 2024

Ozito PXPHTS-1845 Handleiding

8 April 2024

Sterwins EHT2-50.3 Handleiding

16 Maart 2024

Einhell AHS 24 Handleiding

16 Maart 2024

Mr Gardener AH 1846-2 Li PXC Handleiding

12 Maart 2024

Honda HHH25S Handleiding

9 Maart 2024

Ryobi R18PHT120 Handleiding

27 Februari 2024

Shindaiwa DH232 Handleiding

7 Februari 2024

G-Technology HT50 Handleiding

24 Januari 2024

Ergotools Pattfield E-HS 660 Handleiding

12 Januari 2024