Flymo EasiCut 610XT Handleiding

Flymo Heggenschaar EasiCut 610XT

Lees hieronder de 📖 handleiding in het Nederlandse voor Flymo EasiCut 610XT (10 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

EN Operator’s manual

Electric Hedge Trimmer

EasiCut 610XT 9671030-xx

Remark: “xx” stands for customer and country

variants. The basic product number is before the

hyphen.

Page 1 width 2 mm less: 208 mm

31610-85.960.01.indd 1

31610-85.960.01.indd 131610-85.960.01.indd 1 07.09.21 11:02

07.09.21 11:02

07.09.21 11:0207.09.21 11:02

Carton Contents

Fold-out Page width 5 mm less: 205 mm

31610-85.960.01.indd 2

31610-85.960.01.indd 231610-85.960.01.indd 2 07.09.21 11:02

07.09.21 11:02

07.09.21 11:0207.09.21 11:02

1. SAFETY 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. INITIAL OPERATION 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. OPERATION 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. MAINTENANCE 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. STORAGE 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. TROUBLESHOOTING 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7. DISPOSAL 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8. TECHNICAL DATA 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9. SERVICE / WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Original instructions.

This product is not intended for use by persons (including chil-

dren) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the product by a per-

sonresponsible for their safety. Children should be supervised to ensure

that they do not play with the product. The use of this product by young

people under the age of 16 is not recommended.

Intended use:

The FLYMO Hedge Trimmer is intended to cut hedges, shrubs and grass

coverings in private domestic gardens and allotments.

The product is not intended for long term use.

DANGER! Risk of injury!

v Do not use the product to cut lawns / lawn edges, to chop up

material or to make compost.

Carton Contents:

1 Mains cable

2 Handguard

3 Blade cover

4 Operator’s manual

IMPORTANT!

Please check if the contents of the carton are correct BEFORE

assembling your new product.

IF ANY PARTS ARE MISSING CONTACT:

Husqvarna UK Ltd. Customer Service Department direct

Telephone: 0344 844 4558 UK 1800 882 350 ROI

Fax: 01325 302530

1. SAFETY

Important! Read the operator’s manual carefully before use and keep

for future reference.

If not used properly this product can be dangerous. The warnings and

safety instructions must be followed to ensure reasonable safety and

efficiency in using this product. The operator is responsible for following

the warnings and instructions in this manual and on the product. Never

use the product unless the guards provided by the manufacturer are in

the correct position.

Symbols on the product:

Read operator’s manual.

Wear safety glasses and ear protection.

Danger – Keep hands away from blade.

Do not let the product become wet with rain or other moisture.

Do not leave the product outdoors while it is raining.

Disconnect the mains cable if the cable becomes damaged

or cut.

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric

shock, fire and / or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains operated (corded)

power tool or battery operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adaptor plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord

s uitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use

a residual current device (RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the influence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat,

or hearing protection used for appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and / or battery pack, picking up

or carrying the tool. Carrying power tools with your finger on the switch or

energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tools may

result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and col-

lection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power source and / or the battery pack

from the power tool before making any adjustments, changing acces-

sories, or storing power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with

these instructions, taking into account the working conditions and

the work to be performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5) Service

Have your power tool serviced by a qualified repair person using only

identical replacement parts.

This will ensure that the safety of the power tool is maintained.

Page 2 width 2 mm less: 208 mm

31610-85.960.01.indd 4

31610-85.960.01.indd 431610-85.960.01.indd 4 07.09.21 11:02

07.09.21 11:02

07.09.21 11:0207.09.21 11:02

Product specificaties

Merk:	Flymo
Categorie:	Heggenschaar
Model:	EasiCut 610XT

Heb je hulp nodig?

Als je hulp nodig hebt met Flymo EasiCut 610XT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heggenschaar Flymo

Flymo EasiCut 5500 Handleiding

10 Oktober 2023

Flymo Easycut 450 Handleiding

10 Oktober 2023

Flymo EasiCut 510 Handleiding

10 Oktober 2023

Flymo EasiCut 7000XT Handleiding

10 Oktober 2023

Flymo Sabre Cut Handleiding

10 Oktober 2023

Flymo Easicut 420 Handleiding

10 Oktober 2023

Flymo EasiCut Cordless 420 Handleiding

10 Oktober 2023

Flymo Easycut 600 XT Handleiding

10 Oktober 2023

Flymo Easycut 6000 XT Handleiding

10 Oktober 2023

Flymo EasiCut 500 Handleiding

6 September 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Cramer 82HD75 Handleiding

8 April 2024

Ozito PXPHTS-1845 Handleiding

8 April 2024

Sterwins EHT2-50.3 Handleiding

16 Maart 2024

Einhell AHS 24 Handleiding

16 Maart 2024

Mr Gardener AH 1846-2 Li PXC Handleiding

12 Maart 2024

Honda HHH25S Handleiding

9 Maart 2024

Ryobi R18PHT120 Handleiding

27 Februari 2024

Shindaiwa DH232 Handleiding

7 Februari 2024

G-Technology HT50 Handleiding

24 Januari 2024

Ergotools Pattfield E-HS 660 Handleiding

12 Januari 2024