Festo MS6-WPG Handleiding
Festo
Niet gecategoriseerd
MS6-WPG
Bekijk gratis de handleiding van Festo MS6-WPG (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.8 sterren uit 1.5 reviews. Heb je een vraag over Festo MS6-WPG of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
Translation of the original instructions
1 Applicable documents
All available documents for the product www.festo.com/pk.è
Document Product Contents
Instructions MSE6-C2M Operating, Control and Condition Monit-
oring Module
Instructions MSE6-D2M Operating, Energy Efficiency Module
Description MSE6-E2M Assembly, Installation, Commissioning,
Energy Efficiency Module
Tab. 1
2 Safety
2.1 Safety instructions
– Only assemble the product on components that are in a condition to be safely
operated.
2.2 Intended use
Wall mounting of maintenance device modules and service unit
3 Product range overview
3.1 Scope of delivery
Wall mounting kit MS6-WPG:
1
Wall mounting(1x)
2
Module connector(1x)
3
O-ring(1x)
Fig. 1
3.2 Not in scope of delivery
Module connector MS6-MV-EX:
4
Module connector(1x)
(rear)
5
Module connector(1x)
(front)
6
O-ring(1x)
Fig. 2
4 Mounting
4.1 Mounting positions
• Depending on the configuration, mount the wall mounting kit between the fol-
lowing service units and the service device modules.
Product Type Mounting position
Wall mounting kit MS6-WPG black box
Service unit MSE6-D2M [A]
MSE6-E2M [B]
MSE6-C2M...(-M) [C]
Service device module MS6-... [D]
MS6-SV-D [E]
Tab. 2
4.1.1 Positions with service unit[A]/[B] and modules[D]
Fig. 3
4.1.2 Positions with service unit[A]/[B] and modules[D]/[E]
Fig. 4
4.1.3 Positions with service unit[C] and modules[D]
Fig. 5
4.1.4 Positions with service unit[C] and modules[D]/[E]
Fig. 6
4.2 Assembly
NOTICE!
Incorrect electromagnetic compatibility if incorrect module connectors are moun-
ted.
• Use only module connector MS6-MV-EX.
Mounting with example of MSE6-E2M[B]:
Fig. 7
1. Remove earth cable[F] from earth terminal[G].
2. Remove module connector from the wall mounting .2 1
3. Remove sub-base[H] from the service unit[B].
8105041
MS6-WPG
Wall mounting-Set
8105041
2019-01b
[8105043]
Instructions|Assembly
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Fig. 8
• Place O-ring between the service unit[B] and the service device mod-6
ule[D].
Fig. 9
• Mount module connector on the wall mounting . Tightening torque:2 1
1.2Nm ± 10 %
Fig. 10
• Place O-ring between the two service device modules[D].3
Fig. 11
• Mount module connector on the module connector . Tightening torque:5 4
1.2Nm ± 10 %
Fig. 12
1. Place wall mounting on the service device module[D].1
2. Place sub-base[H] on the interface of the service device module[D].
Fig. 13
• Mount module connector on the wall mounting . Tightening torque:2 1
1.2Nm ± 10 %
Fig. 14
1. If necessary, replace the included earth cable[F] with a longer earth cable.
2. Connect the earth cable[F] to the earth point[G] again. Tightening torque:
2Nm ± 10 %
Product specificaties
| Merk: | Festo |
| Categorie: | Niet gecategoriseerd |
| Model: | MS6-WPG |
Heb je hulp nodig?
Als je hulp nodig hebt met Festo MS6-WPG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Festo
2 Augustus 2025
2 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
Handleiding Niet gecategoriseerd
- BabyDan
- Socket Mobile
- Woods
- Plasma Cloud
- Solac
- Rexing
- Lelit
- POGS
- Goclever
- X4-Tech
- IXTECH
- Rean
- Donexon
- Lockwood
- Gustard
Nieuwste handleidingen voor Niet gecategoriseerd
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025