Fantini Cosmi CH133ARR2 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Fantini Cosmi CH133ARR2 (8 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
CH176D
INSTRUCTIONS FOR USE
FANTINI COSMI S.p.A.
Via dell’Osio, 6 20090 Caleppio di Settala, Milan – ITALY
Tel. +39 02 956821 | Fax +39 02 95307006 | info@fantinicosmi.it
www.fantinicosmi.it
DIN RAIL WIRED ACTUATOR FOR
FAN COIL ROOM THERMOSTAT
2
DIN RAIL WIRED ACTUATOR FOR FAN COIL ROOM THERMOSTAT
CH176D
Thank you for purchasing a FANTINI COSMI S.p.A. product
Please read this instruction manual carefully and always keep it at hand should you need to consult it for any reason.
The documentation reflects the characteristics of the product. However, for regulatory or commercial developments,
customers should verify the availability of updates relating to this documentation on the FANTINI COSMI S.p.A.
website: pdf.fantinicosmi.it
OPERATION
The CH176D unit is an actuation model which, connected to a thermostat for fan coil CH133AR2 - CH133RR - CH130AR2
- CH130ARR - CH130RR via a bipolar cable, allows to remotely control the two valves, the three-speed motor or a 0 .. 10V,
motor, and accept a temperature sensor connected to the appropriate input.
The bipolar cable connecting the module to the thermostat, has a dual function:
â– powering the fan coil thermostat,
â– communication bus between thermostat and actuation module.
The CH176D CH172D unit is compatible with the actuator via external set-up. It is possible to connect a single thermostat
to several actuators, so as to control more than one fan coil simultaneously with only two cables; for this application,
carefully follow the detailed instructions in the document.
CONTENTS OF PACKAGE
â– 1 actuator
â– 1 user manual
3
DIN RAIL WIRED ACTUATOR FOR FAN COIL ROOM THERMOSTAT
CH176D
TECHNICAL FEATURES
Power supply and absorbed power 230Vac 50Hz - 2VA
BUS A/B input Power supply + thermostat data (default setting: SLAVE)
Relay output features 5(3)A 250V~
Voltage-free switching contacts with mains voltage 2 valve outputs (N-V1 and N-V2)
Mains voltage switching contacts 3 motor contact outputs (M1, M2 and M3)
0 ... 10V output 20 mA - 470Ω
Probe input NTC 10 KΩ (Fantini EC15-EC18-EC19-EC20)
Protection rating IP00
Software class A
Maximum temperature T45
Degree of pollution 2
Complies with Standards EN60730-1 and second parts
Micro-disconnection 1B
Impulse voltage 4000V
Assembly type and dimensions 6-module DIN Rail
Product not made in Italy


Product specificaties

Merk: Fantini Cosmi
Categorie: Thermostaat
Model: CH133ARR2

Heb je hulp nodig?

Als je hulp nodig hebt met Fantini Cosmi CH133ARR2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Fantini Cosmi

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat