Fantini Cosmi C06 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Fantini Cosmi C06 (6 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 81 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
CARATTERISTICHE COSTRUTTIVE
GENERAL FEATURES
-Termostato automatico di blocco di sicurezza positiva, per caldaie e impianti di
riscaldamento, da collegare in serie ad un termostato di regolazione.
- Shoutdown thermostats with positive safety limit, suitable for boilers and heating
installations, to be connected to a control thermostat;
- Se l’impianto raggiunge la temperatura limite, il termostato interrompe il circuito e
pre riattivarlo necessario intervenire sul riarmo manuale (dopo che la temperatura si
è abbassata di ~25°C);
- When the set temperature limit is reached, the thermostat will shutdown the eletrical
circuit, to restart it is necessary to operate the manual reset button (after a temperture
drop of 25°C);
-In caso di guasto o rottura dell’elemento sensibile, il termostato interrompe il circuito
e non è più possibile riattivare l’impianto (è necessario sostituire il termostato);
- In the case of failure or breakage of the sensing element, the thermostat will
shutdown the eletrical circuit and the insatllation cannot be restarted (thermostat
replacement is necessary);
- Funzionamento a dilatazione di liquido;
- Liquid expamsion sensing element;
-Elemento sensibile con membrane in acciaio inossidabile;
-Stainless steel membrane sensor.
-Bulbo e capillare in rame.
-Copper bulbe and capillary tube.
-Guaina in rame con attacco Gc 1/2” - PN 10 bar.
-Immersion well with gas tapared 1/2” BSP connection. PN 10bar
-Basetta, coperchio e manopola in materiale termoplastico antiurto e autoestinguente
V0 1.6mm.
-Base, cover and knob made of shock-proof self-extinguishing thermoplastic V0.
-Uscita dei collegamenti elettrici con passacavo in PVC.
-PVC cable bushing entry
A richiesta:
On request:
-Pressacavo G ½ per uscita collegamenti in termoplastico antiurto.
-Anti-shock thermoplastic G 1/2 sealed gland for cable entry.
LIMITATORE TERMICO TIPO C06A3M-C06B3M
VIA DELL’OSIO, 6 20090 CALEPPIO DI SETTALA MI
Tel. 02956821 fax 0295307006
E-mail: info@fantinicosmi.it http://www.fantinicosmi.it
Supporto tecnico: supportotecnico@fantinicosmi.it
5679442
TEMPERATURE LIMITER TYPE C06A3M-C06B3M
TIPO
TYPE
C06A3M
C06B3M
100 +0 -6 150
90 +0 -6 150
Intervento di blocco
Shutdown temperature
°C
Tolleranza d’intervento
Lockout tolerance
K
Temp.Max Bulbo
Max bulb temp.
°C
QUOTE D'INGOMBRO/DIMENSION
85
8
8 70
110
15 10 42
40
Tensione nominale d’isolamento
Nominal insulation tension
Corrente nominale di impiego Ie:
Continuous duty normal current:
Carico resistivo
Carico induttivo
Inductive load
Corrente continua
Direct current
220V- 250V~ 380V~
Corrente nominale di impiego Ie:
Operating nominal current Ie:
Ui 380~
Ith 15A
Resistive load
AC-12 - 15A 10A
AC-15 - 2,5A 1,5A
DC-13 0,2A - -
CARATTERISTICHE TECNICHE SECONDO EN 60730-1:
TECHNICAL FEATURES ACCORDING TO EN 60730-1:
-
-
-Microinterruttore in commutazione a scatto rapido
con contatti in AgCdO.
-SPDT microswitch, with silver contacts
-
-apre 1-2
-Rising temperature:
Opens1-2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Pollution degree 2
-Tensione impulsiva nominale 2.5kV
-Nominal impulse voltage 2.5kV
Portata contatti 15(6)A 250V~ 50Hz -Dispositivo di comando previsto per essere fornito esclusivamente
Contact rating 15(6)A 250V~ 50Hz ai costruttori dell'apparecchiatura
-Control device to be supplied to the product manufacturers only
-Categoria di resistenza al calore e al fuoco, categoria D
-Heatproof and fireproof category, D category
-Grado di protezione IP40 All’aumento della temperatura:
-Protection degree IP40
-Mezzo di connessione (conduttori esterni), morsetti a vite
-Wire connection (external wires), screw terminals
-Conduttori speciali connessi ai terminali per conduttori interni:
conduttori idoneii alle temperature resistenti al calore CARATTERISTICHE TECNICHE SECONDO EN 60947-5-1:
-Special wires (joint to screw terminals for internal wires): wires TECHNICAL FEATURES ACCORDING TO EN 60947-5-1:
suitable to the temperature, heatproof wires
-Temperatura massima dei morsetti per conduttori interni 160°C
-Maximum temperature of the terminals for internal wires 160°C
Limiti di temperatura della testa -35T85°C
Maximum head temperature -35T85°C
Classe d’isolamento I
Insulation class I
Microdisconnessione tipo 2B
Micro/disconnection type 2B
PTI dei materiali usati per l’isolamento PTI 175V
Material PTI used for insulation PTI 175V
Metodo di montaggio, da incorporare
Mounting way, to be included
Temperatura di trasporto e immagazzinaggio -35T120°C
Storage and transport temperature -35T120°C
Periodo di sollecitazione elettrica delle parti isolanti, periodo lungo
Period of electrical stress of the insulating parts, long period
-Grado d’inquinamento 2


Product specificaties

Merk: Fantini Cosmi
Categorie: Thermostaat
Model: C06

Heb je hulp nodig?

Als je hulp nodig hebt met Fantini Cosmi C06 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Fantini Cosmi

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat