Fantini Cosmi C02 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Fantini Cosmi C02 (3 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
-
CARATTERISTICHE TECNICHE SECONDO EN/UL/CSA 60730-1, -
EN/UL/CSA 60730-2-9: -
TECHNICAL FEATURES ACCORDING TO -
- -
- -
-
-
-
-
-Microinterruttore in commutazione a scatto rapido -
-con contatti in AgCdO, dorati. -
-SPDT microswitch, with gold plated silver contacts
-apre 1-2 chiude 1-4
-
-Rising temperature:
-
- Opens1-2, closes 1-4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Pollution degree 2
Tensione impulsiva nominale 2.5kV
Nominal impulse voltage 2.5kV
EN/UL/CSA 60730-1, Azione tipo 1
EN/UL/CSA 60730-2-9:
Portata contatti 15(6)A 250V~ 50Hz Type 1 action
Contact rating 15(6)A 250V~ 50Hz Dispositivo di comando previsto per essere fornito esclusivamente
ai costruttori dell'apparecchiatura
15A carico resistivo, 6A FLA/36LRA 240Vac 50/60Hz Control device to be supplied to the product manufacturers only
15A resistive load, 6A FLA/36LRA 240Vac 50/60Hz
Categoria di resistenza al calore e al fuoco, categoria D
Heatproof and fireproof category, D category
All’aumento della temperatura:
Grado di protezione IP00
Protection degree IP00
Mezzo di connessione (conduttori esterni), terminali “FASTON”
6,3mm
Wire connection (external wires), “FASTON” terminals 6,3mm
Conduttori speciali connessi ai terminali per conduttori interni:
conduttori idoneii alle temperature resistenti al calore CARATTERISTICHE TECNICHE SECONDO EN 60947-5-1:
Special wires (joint to screw terminals for internal wires): wires TECHNICAL FEATURES ACCORDING TO EN 60947-5-1:
suitable to the temperature, heatproof wires
Temperatura massima dei morsetti per conduttori interni 130°C
Maximum temperature of the terminals for internal wires 130°C
Limiti di temperatura della testa T85°C
Maximum head temperature T85°C
Classe d’isolamento I
Insulation class I
Microdisconnessione tipo 1B
Micro/disconnection type 1B
PTI dei materiali usati per l’isolamento PTI 175V
Material PTI used for insulation PTI 175V
Metodo di montaggio, da incorporare
Mounting way, to be included (incorporated control)
Temperatura di trasporto e immagazzinaggio -35T120°C
Storage and transport temperature -35T120°C
Periodo di sollecitazione elettrica delle parti isolanti, periodo lungo
Period of electrical stress of the insulating parts, long period
Grado d’inquinamento 2
TERMOSTATO DA RETROQUADRO A CAPILLARE SERIE C02--
Tensione nominale d’isolamento
Nominal insulation tension
Corrente nominale di impiego Ie:
Continuous duty normal current:
Carico resistivo
Carico induttivo
Inductive load
Corrente continua
Direct current
220V- 250V~ 380V~
VIA DELL’OSIO, 6 20090 CALEPPIO DI SETTALA MI
Tel. 02956821 fax 0295307006
E-mail: info@fantinicosmi.it http://www.fantinicosmi.it
Supporto tecnico: supportotecnico@fantinicosmi.it
5679198G
REAR PANEL CAPILLARY THERMOSTAT TYPE C02--
Corrente nominale di impiego Ie:
Operating nominal current Ie:
Ui 380~
Ith 15A
Resistive load
AC-12 - 15A 10A
AC-15 - 2,5A 1,5A
DC-13 0,2A - -
TIPO
TYPE
C02A3 10÷90 ±3 6±1 150
Scala
Range
°C
Precisione taratura
Calibration accuracy
°C
Differenziale
Differential
K
Temp.Max Bulbo
Max bulb temp.
°C
L D
C02A3 1 73.5 6.5
C02B3 1,5 65 5
C02C2 103 6.5
C02D2 103 6.5
C02E3 1 73.5 6.5
C02F 1 195 3.5
1,5
1,5
Bulbo
Bulb
mm
QUOTE D'INGOMBRO / DIMENSIONS
Tipo
Type
L. capillare
Capillary L.
m
C02B3 50÷300 ±3 8±2 350
C02C2 -20÷40 ±2 2±0.5 80
C02D2 -35÷20 ±2 2±0.5 80
C02E3 40÷120 ±3 6±2 150
Dettaglio perno per
manopola
Pin for knob
C02F 50÷320 ±3 10±2 330
CARATTERISTICHE COSTRUTTIVE
GENERAL FEATURES
-Termostato a capillare per la regolazione della temperatura di caldaie, impianti di
condizionamento, impianti di refrigerazione, elettrodomestici e forni elettrici.
-Capillary thermostat for water temperature control in boilers, air conditioning,
cooling units and systems, domestic appliances and electric ovens.
-Montaggio a retroquadro.
-Rear panel mounting.
-Funzionamento a dilatazione di liquido.
-Liquid expansion operation.
-Elemento sensibile con membrana in acciaio inossidabile.
-Stainless steel membrane sensor.
-Bulbo e capillare in rame.
-Copper bulbe and capillary tube.
-
-
-
-Bulbo e capillare in rame stagnato per C02C2 e C02D2.
Tin plated copper for C02C2 and C02D2 types.
Basetta in materiale termoplastico antiurto e autoestinguente V0-1.6mm
Base made of shock-proof self-extinguishing thermoplastic V0-1.6mm
0497
Ø 8
15 10
esag. 22
20 22
esag. 22
152
RETRO
NB: PIEGARE CON DUE PIEGHE INCROCIATE FORMATO CHIUSO 105x148mm
Ø 8
15 10
esag. 22
20 22
esag. 22
152


Product specificaties

Merk: Fantini Cosmi
Categorie: Thermostaat
Model: C02

Heb je hulp nodig?

Als je hulp nodig hebt met Fantini Cosmi C02 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Fantini Cosmi

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat