CRUX ONST-11B Handleiding

Bekijk gratis de handleiding van CRUX ONST-11B (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 28 mensen en kreeg gemiddeld 4.3 sterren uit 6 reviews. Heb je een vraag over CRUX ONST-11B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.2301231 of 3

RAD REPLATIOCE MEN

SWC ENTRETION

+

R

INTERFACING SOLUTIONS

- Retains factory features in select GM LAN 11 Bit vehicles while functioning with an aftermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- Supports Non-Bose and Bose amplified systems.

- Provides Vehicle Speed Sensor (VSS), Parking Brake and Reverse Outputs.

- Retains factory OnStar®

- Retains chime functions.

-EIA color coded wiring for easy installation.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

ONST-11B MODULEONST-11B HARNESSSWC CABLES

16 & 14-Pin

Connector Harness

ONST-11B

OnStar® Radio Replacement Interface with RetentionSWC

for Select GM LAN 11-Bit Vehicles 2006-2012

AFTERMARKET

RADIO

Reverse GearPurple/White

Parking Brake Yellow/Black

Illumination (+) Orange

+12V Constant Yellow

+12V ACC Red

Ground Black

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

Vehicle Speed OutputRed/Black

Amplifier Turn-onBlue/White

TO FACTORY

HARNESS

24-Pin

Connector

8-Pin

Connector

BOSE NON

BOSE

10-Pin

Connector SWC DIP SWC

1 2 3 4

ON

Chime Volume

Adjustment

4-Pin

Connector

Cap or insulate if

not being used

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

JVC/Kenwood (Blue / Yellow)

To aftermarket

radio SWC wire or

3.5mm port

LAN Bus not recognized

LAN Bus recognized

Product specificaties