Cotech 922205 Handleiding

Bekijk gratis de handleiding van Cotech 922205 (5 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.4 sterren uit 6 reviews. Heb je een vraag over Cotech 922205 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

GREAT BRITAIN • CUSTOMER SERVICEtel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

1

2

3

6

5

4

Ver. 20161213

15 W LED Work Light

Art.no 18-1325 Model 922205-UK

36-6500 922205

Please read theentire instruction manual before using theproduct and then

save it for future reference. Wereserve theright for any errors in text or images

and any necessary changes made to technicaldata. Ifyou have any questions

concerning technical problems please contact our Customer Services.

Safety

• TheLEDs in this work light have avery intensive light output. Donot let

children play with theworklight. Donot look directly into thelight or direct

thelight into another person’s eyes, doing so could cause eye damage.

• Do not touch thehousing or glass of thework light when it is switched on

– risk of burn injury.

• Do not install thework light near flammable materials or surfaces.

• Do not cover theworklight.

• Do not dismantle or modify theworklight.

• Themains lead should be checked regularly. Neveruse thework light if

themains lead or plug is damaged.

• Always unplug thework light from thepower point when it is not inuse.

Pulltheplug, not thelead.

• If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or qualified persons in order to avoid a hazard.

• Thework light is suitable for use in temperatures between −20 and +40 °C.

• Thework light should be connected to anearthed 230 V powerpoint.

• Check before use that thehousing, glass, power switch, mains lead and

plug are all undamaged. Anyfault or damage must be repaired immediately

by aqualified electrician before thework light isused.

• Do not use thework light near combustible or explosive liquids, solids orgases.

• Thework light must only be used when it is mounted on theincluded base

and bracket assembly. Thework light must not be mounted on awall

orceiling.

• Treat thework light with care and do not subject it to shocks or impacts.

• Thework light must not be immersed in water or other liquid.

Product descriptionOperating instructions

1. Connect themains lead to a230 V powerpoint.

2. Adjust thelamp housing to thedesiredangle.

3. Switch thework light on using thepower switch (6).

4. Switch off and unplug thework light afteruse.

1. Base

2. Bracket

3. Handle

4. Locking screws (star knob)

5. Lamphousing

6. Powerswitch

Assembly instructions

Attach thebracket and

thehandle (3) to thebase(1)

using two locking screws(4).

Responsible disposal

This symbol indicates that this product should not be disposed

of with general householdwaste. Thisapplies throughout

theentire EU. Inorder to prevent any harm to theenvironment

or health hazards caused by incorrect waste disposal,

theproduct must be handed in for recycling so that thematerial

can be disposed of in aresponsible manner. Whenrecycling

your product, take it to your local collection facility or contact

theplace of purchase. Theywill ensure that theproduct is

disposed of in anenvironmentally sound manner.

Specifications

Voltage 230V, 50/60Hz

Power 15W

Light source COB/Bridgelux LED

Luminousflux 1500lm

Colour temperature 4000K

Colour rendition > 80 Ra

Beamangle 120°

Ingress protection IP54

Protectionclass Class1 (this light fitting must be earthed)

Cable 1.8m rubber clad cable with earthed plug

(H07RN-F 3×1.0 mm²)

Size 220×185×210mm

Thelight source contained in this luminaire shall only

be replaced by themanufacturer or his service agent

or asimilar qualified person.

Care and maintenance

Unplug thework light and allow it to cool before cleaning.

Clean thelight using asoft, dampcloth. Useamild detergent.

Neveruse solvents or strong, abrasive cleaning agents.

Product specificaties