Cotech IPC30SA1A Handleiding

Bekijk gratis de handleiding van Cotech IPC30SA1A (4 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 110 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over Cotech IPC30SA1A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

UNITED KINGDOM •

www.clasohlson.co.uk

Ver. 20220406

LED Floodlight

Art.no 36-7617-1, 36-7617-2, 36-7618-1, 36-7618-2

Model IPC15A1A-B, IPC15A1A-W, IPC30SA1A-B, IPC30SA1A-W

Please read theentire instruction manual before use and then save it for

future reference. Wereserve theright for any errors in text or images and any

necessary changes made to technicaldata. Intheevent of technical problems or

other queries, please contact our Customer Services.

Safety

• This product is extremely bright. Donot look directly into thelight, doing so

could cause eye damage.

• Never let children play with theproduct.

• The product should only be connected to an earthed 230 V AC, 50 Hz

mains outlet.

• Theproduct must not be used in rooms where explosive gases or liquids are

used or stored.

• Treat theproduct with care and do not subject it to shocks or impacts.

• Never immerse theproduct in water or other liquid.

• Theproduct must not be covered.

• Never try to open thehousing, repair or modify theproduct in anyway.

• Never use theproduct if your hands are moist orwet.

• Never use theproduct if it, its mains lead or plug is damaged in anyway.

• All repairs must be carried out by qualified service technicians using genuine

spareparts.

• Themains lead should be checked regularly. Ifthemains lead is damaged in

any way it must be replaced by aqualified electrician.

Installation

• Fasten thefloodlight to afirm, level surface.

• Do not mount thefloodlight where there is arisk of it falling into water or

other liquids.

Warning

• Make sure that thewall has no concealed electrical wiring, gas or water

pipes before drilling/screwing.

• Make sure that thepower supply to thefloodlight is switched off/isolated.

• Thefloodlight should be connected to apower supply protected by asafety

device such as aresidual current circuit breaker/residual current device

(RCCB/RCD).

TheLED module in thelight fitting must not be replaced by anyone other

than aqualified electrician.

Specifications

36-7617-1

Rated voltage 220–240V AC, 50/60Hz

Power 15W

Colour Black

Light source COB-LED, 1400 lm (non-replaceable)

Colour temperature 4000K

Colour rendition> 80 Ra

Beam angle 120°

IP rating IP65

Protection class Class 1 (theproduct must be earthed)

Operating temperature −20 to 40 °C

Connecting cable 80 cm, H05RN-F3G1.0 mm²

Size 15×12×4.2cm

36-7617-2

Rated voltage 220–240V AC, 50/60Hz

Power 15W

Colour White

Light source COB-LED, 1400 lm (non-replaceable)

Colour temperature 4000K

Colour rendition> 80 Ra

Beam angle 120°

IP rating IP65

Protection class Class 1 (theproduct must be earthed)

Operating temperature −20 to 40 °C

Connecting cable 80 cm, H05RN-F3G1.0 mm²

Size 15×12×4.2cm

36-7618-1

Rated voltage 220–240V AC, 50/60Hz

Power 30W

Colour Black

Light source COB-LED, 2600 lm (non-replaceable)

Colour temperature 4000K

Colour rendition> 80 Ra

Beam angle 120°

IP rating IP65

Protection class Class 1 (theproduct must be earthed)

Operating temperature −20 to 40°C

Connecting cable 80 cm, H05RN-F3G1.0 mm²

Size 17.5×14.5×5cm

36-7618-2

Rated voltage 220–240V AC, 50/60Hz

Power 30W

Colour White

Light source COB-LED, 2600 lm (non-replaceable)

Colour temperature 4000K

Colour rendition> 80 Ra

Beam angle 120°

IP rating IP65

Protection class Class 1 (theproduct must be earthed)

Operating temperature −20 to 40 °C

Connecting cable 80 cm, H05RN-F3G1.0 mm²

Size 17.5×14.5×5cm

1. Use thewall bracket as atemplate

and mark out where thescrew holes

are to be drilled.

Note: You don’t need to detach

thewall bracket from thefloodlight,

it pivots to make it easier to mark

out holes for drilling and screwing in

mounting screws.

2. Use anappropriate type of screw

for thewall material and attach

thebracket to thewall.

3. Tilt thefloodlight to thedesired angle

and tighten thescrews fastening

thewall bracket to thefloodlight.

Care and maintenance

Clean thefloodlight by first switching it off and then wiping it with adrycloth.

Important

If theglass on thefront of thefloodlight is damaged, it must be replaced before

thefloodlight is usedagain. Thefloodlight must not be used if theglass is

damaged or missing.

Responsible disposal

This symbol indicates that this product should not be

disposed of with general householdwaste. Thisapplies

throughout theentire EU. Inorder to prevent any harm to

theenvironment or health hazards caused by incorrect

waste disposal, theproduct must be handed in for recycling

so that thematerial can be disposed of in aresponsible

manner. Whenrecycling theproduct, take it to your local

collection facility or contact theplace of purchase. Theywill

ensure that theproduct is disposed of in anenvironmentally

sound manner.

Product specificaties