Cotech JF8100-20W Handleiding

Bekijk gratis de handleiding van Cotech JF8100-20W (5 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.1 sterren uit 7 reviews. Heb je een vraag over Cotech JF8100-20W of wil je andere gebruikers van dit product iets vragen? Stel een vraag

GREAT BRITAIN • CUSTOMER SERVICE

contact number: 020 8247 9300

e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk

ENGLISH

Ver. 20161121

20 W Work Light

Art.no 18-2866 Model JF8100-20W-UK

36-5587 JF8100-20W

Please read theentire instruction manual before using theproduct and then save it for future reference.

We reserve theright for any errors in text or images and any necessary changes made to technicaldata.

In theevent of technical problems or other queries, please contact our Customer Services.

Safety

• Read these instructions carefully before using theproduct.

• Never let children use theproduct without adult supervision. Neverlook directly into thelight; it could damage

youreyesight.

• Always unplug thelight when it is not inuse. Pulltheplug, not thelead.

• Protect thework light from dust, water and extreme temperatures. Hightemperatures can damage thebulb.

• Before use, check that theplug, lead, diffuser and casing are all undamaged. Ifany damage is detected, do not

use thelight until it has been repaired by aqualified technician.

• Never cover theworklight.

• Never use thework light in thevicinity of explosive gases or liquids.

• TheLEDs cannot be replaced.

• This light must not be dismantled or modified in anyway.

• Thelight must only be used on thesupplied stand, it must never be mounted on awall or ceiling.

• Treat thelight carefully and do not subject it to knocks andblows.

• Thelight must only be connected to anearthed electrical socket.

• Before using thelight, make sure that thesupply voltage corresponds to thelight’s rated voltage.

Operating instructions

1. Placethestand on afirm surface where it cannot tipover.

2. Adjust thetilt angle as necessary.

3. Plugthelight into awall socket.

Care and maintenance

• Never use strong cleaning agents/solvents to clean theproduct. Cleanthelight using asoftcloth.

• Always unplug thelight before cleaningit.

Disposal

This product should be disposed of in accordance with local regulations.

Ifyou are unsure how to proceed, contact your local council.

Specifications

Voltage 220–240 V AC, 50 Hz

Bulb 1×20W LED

Lead 1.8 m rubber-clad cable H05RN-F 3×0.75 mm²

IP rating IP54

Class 1

Product specificaties