CDN ProAccurate INTP662 Handleiding

CDN Thermometer ProAccurate INTP662

Bekijk gratis de handleiding van CDN ProAccurate INTP662 (5 pagina’s), behorend tot de categorie Thermometer. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 5.0 sterren uit 3.5 reviews. Heb je een vraag over CDN ProAccurate INTP662 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/5

for non-contact and internal temperatures

•NSF

Certified

•1&3secondresponses

•1.5mmthintip

•3.75”(9.53cm)probe

•Infraredfornon-contactsurfacetemperatures

•Thermocoupleprobeforinternaltemperatures

•Dualfunction

•Maximum,minimumandlockmodesforcontinuous

scanning

•8-beamlasertargetillumination

•Distance:Spot=8:1

•Data-hold

•One-buttonoperation

•BacklitHACCPchecklights

•Batterystatusindication

•Food-safeABSplasticwithBioCote

•Stainlesssteelprobe

•Auto-off

•Batteryandinstructionsincluded

Get Professional Results

Every Time!

Monitoringtemperatureisessentialtokeepingfoodsafe.

TheversatileINTP662isapowerhousekitchentool.

Simplypointtheinfraredguntowardthetargetandpress

thetriggertogetaquickreadingofsurfacetemperatures

orflipdowntherapid-responsethermocoupleprobeto

measureinternaltemperatures.IntegratedHACCPcheck

backlightinginstantlyshowsiftemperaturesarewithin

HACCPguidelinesforsafefoodtemperatures.

Minimum, Maximum and Lock

TheINTP662alsooffersMinimum,Maximum,andLock

modes.Minimummodedisplaysthelowesttemperature

amongmultipletargets.Maximummodedisplaysthe

highesttemperatureamongmultipletargets.WhileLock

modecontinuouslydisplaysthetemperatureforupto

60minutes.Thisisparticularlyusefulforcontinuous

temperaturemonitoring.

Note:Removestickerfromdisplaybeforeuse.Cleanthe

thermometerprobebeforeeachuse.

Important: DO NOT LEAVE THERMOMETER IN HOT OVEN.

HAND WASH AND DRY. DO NOT IMMERSE HOUSING IN

LIQUID.

Note:Inthefollowinginstructions,namesofthecontrol

buttonsareshowninCAPS.Functioninformationthat

appearsonthedisplayisshownin .BOLD CAPS

Battery Installation

ReplacebatterywhenLCDbecomesdim.Poweroffthe

unitbeforeinstallingthebatteries.Amalfunctionmay

occurifthepowerisonwhenthebatteryisinstalled.Ifa

malfunctionoccurs,restartthedevice.

1. Removebatterycoverbyslidingitdownalongthe

handle.

2. Installtwo1.5VAAAbatteriesobservingpolarity

shownincompartment.

3. Replacethebatterycoveruntilitclicksshut.

Model: INTP662

ProAccurate

Infrared Gun/

Thermocouple Thermometer

Infrared:-76to+662°F/-60to+350°C

Thermocouple:-76to+662°F/-60to+350°C

Operating Instructions

Mode Selection:MINØ Ø ØMAX LOCK °C/°FØEMIS

A. Temperature Scale

ToselecttemperaturereadinginFahrenheitorCelsius:

1. Pressthetriggertoturnthethermometeron.

2. PresstheMODEbuttonfourtimes.The°F or °C

symbolflashesonthedisplay.

3. PresstheSCANbuttontochangethescale.

B. Infrared Thermometer

InfraredisthedefaultmodeoftheINTP662.

Note:TheINTP662isintendedforfoodserviceuse—donotuse

forsafetyrelatedapplications.

1. Infrared Scanning

a. Distance:Spot = 8:1

Forexample,ifthe

surfaceareabeing

measuredis10"in

diameter,thenthethermometermustbewithin

80"ofthetargetforanaccuratereading.

b. Aimtheinfraredlensatthetargetandpress

thetriggertodisplaythesurfacetemperature.

The8-beamlaserlightautomaticallyilluminates

thetarget,specifyingtheapproximate

measurementareaforbettertargeting.

c. The8-beamlaserlightformsacirclethat

definestheareaofmeasure.Makesurethe

circleissmallerthantheareabeingmeasured.

Ifthelaserlightcircleislargerthanthearea

beingmeasured,thereadingwillincludeambient

temperaturesandmakethereadinginaccurate.

d. Measurementcontinuesaslongasthetrigger

ispressed.Thenewestreadingupdatesthe

display.

e. Whenthetriggerisreleased,HOLD appears on

thedisplayandthelastreadingremainsvisible

for15secondsbeforetheunitautomatically

powersoff.

2. Minimum Mode

a. Pressthetriggertoturnthethermometeron.

b. PresstheMODEbuttononce. flashesonMIN

thedisplay.

c. PressthetriggertoconfirmtheMinimumMode

anddisplaythelowesttemperatureamong

multipletargets. remainsonthedisplay.MIN

d.Thethermometercontinuestodisplaythe

minimumreadingduringeachmeasurement

perioduntiltheMODEbuttonispressedagainor

theunitpowersoff.

3. Maximum Mode

a. Pressthetriggertoturnthethermometeron.

b. PresstheMODEbuttontwice. flashesonMAX

thedisplay.

c. PressthetriggertoconfirmtheMaximumMode

anddisplaythehighesttemperatureamong

multipletargets. remainsonthedisplay.MAX

d.Thethermometercontinuestodisplaythe

maximumreadingduringeachmeasurement

perioduntiltheMODEbuttonispressedagain

ortheunitpowersoff.

4. Lock Mode

Thisisparticularlyusefulforcontinuous

temperaturemonitoring.

a. Pressthetriggertoturnthethermometeron.

b. PresstheMODEbuttonthreetimes.LOCK

flashesonthedisplay.

c. PressthetriggertoconfirmtheLockMode.

The°F or °Csymbolflashesonthedisplay.

d. Thethermometercontinuouslydisplaysthe

temperatureforupto60minutesoruntilthe

triggerispressedagain.

5. Emissivity

Everythinggivesoffacertainamountofradiation.

Emissivityisthemeasureofthisthermalradiation.

Theinfraredthermometerissuppliedwithadefault

emissivityof0.95,whichstandardformostuses.

Theemissivityofthethermometercanbechanged

from0.10(10E)to1(100E).Only experienced

personnel should attempt to make changes.

Forinformationrelatingtotheemissivityofspecific

materials,pleasecontactCDN.

a. Pressthetriggertoturnthethermometeron.

b. PresstheMODEbuttonfivetimestoenter

EmissivityMode. flashesonthedisplay.95E

c. Pressthetriggertoadjusttheemissivityvalue

in0.01(1E)increments.

d. PresstheMODEbuttonagaintoexit

EmissivityMode.

Note:Non-contactinfraredthermometersarenot

recommendedforuseinmeasuringthetemperatureof

shinyorpolishedmetals.

6. Error Messages

TheINTP662incorporatesvisualdiagnostic

messagesasfollows:

a. HI LO or isdisplayedwhenthetemperature

beingmeasuredisoutsidetheinfraredrange

oftheinstrument.

1.)HI indicatesthatthetemperatureishigher

than+662°F/+350°C.

2.)LO indicatesthatthetemperatureis

lowerthan-76°F/–60°C.

b. Allowaminimum30minutesforthe

thermometertostabilizetotheworking/room

temperature.

Distance:Spot(FOV)=8:1

Emissivity=0.1~1,Step.01

WaveLength=8~14µm

CAUT ION: Never point the unit and/or las er toward s

anyone’s eyes. Do not look directly into the laser

beam s — permanent eye damage may result. Keep

away from children.

1.)ER2 isdisplayedwhenthethermometeris

exposedtorapidchangesinthe

ambienttemperature.

2.)ER3 isdisplayedwhentheambienttemperature

exceeds-32°F/0°COR+122°F/+50°C.

c. Forallothererrormessagesitisnecessary

toresetthethermometer.

1.)Waitforthethermometertopoweroff.

2.)Removethebatteryandwaitforaminimum

ofoneminute.

3.)Reinstallthebattery(seeBattery Installation).

4.)PresstheTriggertoturnthethermometeron.

5.)Iftheerrormessageremains,pleasecontact

CDNforfurtherassistance.

C. Thermocouple Probe

Important: The probe may be damaged if measurement

temperature is lower than -76°F/-50°C OR higher than

+662°F/+350°C.

1. Flipdowntheprobeuntilfullyextended.

Important: Do not twist the probe or rotate it in wrong

direction. Exceptional stress on probe may cause it to break.

CAUTION:Toavoidelectricshockandthermometerdamage,

donotusethethermocoupleprobetomeasurelivecircuitwhere

voltageexceeding24VACRMSor60VDC.

2. Inserttheprobeatleast1"/2.5cmintothefood.

3. PressthePROBEbuttontocontinuouslydisplay

thetemperatureforupto4minutesbeforetheunit

automaticallypowersoff.Thedisplayflashes.

Note:PressingthePROBEbuttonmayinterruptthelast

infraredHOLDreading.PressthePROBEbuttonagaintoreturn

toinfraredscanning.

4. Wearingaheatresistantglove,fliptheprobeback

intothecasewhenfinished.

CAUTION:ProbemaybeHOTafteruse.Alwayswearaheat

resistantglovetotouchthestainlesssteelprobeduringorjust

aftercooking.Do not touch with bare hands.

5. PressthePROBEbuttonagaintoreturntoinfrared

scanning.

D. HACCP Check

IntegratedHACCPcheckbacklightsinstantlyshowif

temperaturesarewithinHACCPguidelinesforsafe

foodtemperatures.

Note:TheGREENandREDLEDbacklightwillalwaysbelitbefore

poweroff.

1. A LEDbacklightindicatesasafecoolorGREEN

frozenconditionbelow40°F/4°Corasafeholding

temperatureabove140°F/60°C.

3. A LEDbacklightindicatesthatthetemperatureRED

iswithinthe of40toHACCP Danger Zone

140°F/4to60°C.

E. Battery Status

Thethermometerincorporatesvisualbatterystatus

indication:

1. measurementsarepossible Battery OK:

2. Battery Low:replacebatterywithtwo1.5V

AAAAlkalinecells;measurementsarepossible

3. replacebattery; Battery Exhausted:

 measurementsarenotpossible

Care of Your Product

•Thesensorlensisthemostdelicatepartofthe

thermometerandshouldbekeptcleanatalltimes.

Takecarewhencleaningthelens.Useonlyasoftcloth

orcottonswabwithwaterorrubbingalcohol.Allowthe

lenstodryfullybeforeusingthethermometer.

•Donotsubmergeanypartofthethermometerinwater.

Wipecleanwithadampcloth.

•Storethethermometeratroomtemperaturebetween

-4to+149°F/–20to+65°C.

Precautions

•Disposeofusedbatterypromptlyandkeepawayfrom

children.

•Alwayswearaheatresistantglovetotouchthe

stainlesssteelprobeduringorjustaftercooking.

Do not touch with bare hands.

•Keepthebatteries,stainlesssteelprobeandlaser

awayfromchildren.

•Cleantheprobeanddrythoroughlyafteruse.

•Donotcleanthecasewithabrasiveorcorrosive

compound,whichmayscratchtheplasticandcorrode

theelectroniccircuits.

•Donotsubjecttheunittoexcessiveforceshock,

dust,temperatureorhumidity,whichmayresultin

malfunction,shorterelectroniclifespan,damaged

batteryanddistortedparts.

•Donottamperwiththeunit’sinternalcomponents.

Doingsowillinvalidatethewarrantyontheunit

andmaycauseunnecessarybatterydamageand

distortedparts.

•Donotsubjecttheunittoexcessiveexposuretodirect

sunlight.The unit is not waterproof—donotimmerse

itintowaterorexposetoheavyrain.

•Toavoiddeformation,donotplacetheunitinextreme

temperatures.Neverburntheprobedirectlyover

thefire.Donotusetheprobewhenthetemperature

isabove662°F/350°C.Doingsowilldeteriorate

theprobe.

•Donotusethethermometerinamicrowaveoven.

•Alwaysreadtheusersmanualthoroughlybefore

operating.

EMC/RFI

Readingsmaybeaffectediftheunitisoperatedwithinaradio

frequency electromagnetic field strength of approximately

3voltspermeter,buttheperformanceoftheinstrumentwill

notbepermanentlyaffected.

Product specificaties

Merk:	CDN
Categorie:	Thermometer
Model:	ProAccurate INTP662

Heb je hulp nodig?

Als je hulp nodig hebt met CDN ProAccurate INTP662 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Thermometer CDN

CDN IN482 Handleiding

10 Juni 2025

CDN ProAccurate GTS800X Handleiding

10 Juni 2025

CDN DTL572 Handleiding

10 Juni 2025

CDN DTP392 Handleiding

10 Juni 2025

CDN ProAccurate FG80 Handleiding

10 Juni 2025

CDN IN1022 Handleiding

10 Juni 2025

CDN ProAccurate RFT1 Handleiding

9 Juni 2025

CDN ProAccurate INTP662 Handleiding

9 Juni 2025

CDN TCG400 Handleiding

9 Juni 2025

CDN TCF400 Handleiding

9 Juni 2025

Handleiding Thermometer

Nieuwste handleidingen voor Thermometer

Comark N9002 Handleiding

10 Juni 2025

Taylor 5286344 Handleiding

10 Juni 2025

NEO Tools 75-275 Handleiding

10 Juni 2025

NEO Tools 75-276 Handleiding

10 Juni 2025

Beurer FT 17 Handleiding

6 Juni 2025

Beurer FT 16 Handleiding

2 Juni 2025

Rossmax BP5 Handleiding

25 Mei 2025

Sogo SS-14055 Handleiding

20 Mei 2025

Elektrobock CN-TH2 Handleiding

12 Mei 2025

Medisana TM 670 Handleiding

19 April 2025