CDN IN1022 Handleiding

CDN Thermometer IN1022

Bekijk gratis de handleiding van CDN IN1022 (5 pagina’s), behorend tot de categorie Thermometer. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.3 sterren uit 6 reviews. Heb je een vraag over CDN IN1022 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/5

Perfect For

•Non-contactsurfacetemperatures

Easy To Use

•1-secondresponse

•8-beamlasertargetillumination

•Backlit

•Data-hold

•One-buttonoperation

Features

•Shatterproof

•Memory

•Maximum,minimum,difference,averagewithlockfor

continuousscanning

•Highandlowalerts

•Distance:spot=12:1

•Batterystatusindication

•ABSplastic

•Auto-off

•Batteriesandinstructionsincluded

Get Professional Results

Every Time!

Monitoringtemperatureisessentialtokeepingfood

safe.TheversatileIN1022isperfectforanyapplication.

Simplypointtheinfraredsensorlenstowardthetarget

andpressthetriggertogetaquickreadingofsurface

temperatures.

Maximum, Minimum, Difference

and Average Modes

TheIN1022alsooffersMaximum,Minimum,Difference

andAveragemodes.Maximummodedisplaysthehighest

temperatureamongmultipletargets.Minimummode

displaysthelowesttemperatureamongmultipletargets.

Differencemodedisplaysthedifferencebetweenthe

maximumandminimumtemperaturemeasurements

ofmultipletargets.WhileAveragemodedisplaysthe

averagetemperaturemeasurementsofmultipletargets.

Lock Mode

Lockmodecontinuouslymeasuresthetemperature

forupto60minutes.Thisisparticularlyusefulfor

continuoustemperaturemonitoring.

High and Low Alerts

TheIN1022providesaprogrammablehighandlowalert

formeasurementsthatareoutofthedesiredrange.

Note:Removestickerfromdisplaybeforeuse.

Note:Inthefollowinginstructions,namesofthecontrol

buttonsareshowninCAPS.Functioninformationthatappears

onthedisplayisshowninBOLD CAPS.

Battery Installation

ReplacebatterywhenLCDbecomesdimoralarm

leveldeclines.Powerofftheunitbeforeinstallingthe

batteries.Amalfunctionmayoccurifthepowerison

whenthebatteryisinstalled.Ifamalfunctionoccurs,

restartthedevice.

1. Removebatterycoverbyslidingitinthedirectionof

thearrow.

2. Installtwo1.5VAAAbatteriesobservingpolarity

shownincompartment.

3. Replacethebatterycoveruntilitclicksshut.

Model: IN1022

Infrared Gun



-76to+1022°F/-60to+550°C

Operating Instructions

Mode Selection: E

Eâ á

MAX

MIN

DIF

AVG

HAL

LAL

A. Temperature Scale

ToselecttemperaturereadinginFahrenheit

orCelsius:

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. Pressthe°C/°Fbuttontochangethescale.

B. Backlit Display

Toturnthebacklitdisplayonandoff:

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. Pressandholdthetriggerandthenalsopress

theLOCKbuttontoturnthebacklitdisplayonand

off.TheBACKLIGHT icon( )appearsinthetop

portionofthedisplaywhenon.

C. Laser Light

Toturnthelaserlightonandoff:

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. Pressandholdthetriggerandthenalsopressthe

C°/F°buttontoturnthelaserlightonandoff.The

LASER icon( )appearsinthetopportionofthe

displaywhenon.

E. Lock Mode

Thisisparticularlyusefulforcontinuoustemperature

monitoringforupto60minutesandcanbeusedwith

Minimum,Maximum,DifferenceandAveragemodes.

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheLOCKbutton. appearsinthetopLOCK

portionofthedisplaywhenon.

3. Thethermometercontinuouslydisplaysthe

temperatureforupto60minutesorrestartsthe

timeifthetriggerispressedagain.

F. Infrared Thermometer

Note:TheIN1022isintendedforfoodserviceuse—donotusefor

safetyrelatedapplications.

1. Infrared Scanning

1. Distance:Spot = 12:1

Forexample,ifthesurface

areabeingmeasuredis

10"indiameter,thenthethermometermustbe

within120"ofthetargetforanaccuratereading.

2. Aimtheinfraredlensatthetargetandpress

thetriggertodisplaythesurfacetemperature.

Ifon,thelaserlightautomaticallyilluminates

thetarget.

3. The8-beamlaserlightformsacirclethatdenes

theareaofmeasure.Makesurethecircleis

smallerthantheareabeingmeasured.Ifthe

laserlightcircleislargerthantheareabeing

measured,thereadingwillincludeambient

temperaturesandmakethereadinginaccurate.

4. Measurementcontinuesaslongasthetriggeris

pressed.Thenewestreadingupdatesthedisplay.

5. Whenthetriggerisreleased, appearsonHOLD

thedisplayandthelastreadingremainsvisible

for60secondsbeforetheunitautomatically

powersoff.

2. Emissivity

Everythinggivesoffacertainamountofradiation.

Emissivityisthemeasureofthisthermalradiation.

Theinfraredthermometerissuppliedwithadefault

emissivityof0.95,whichstandardformostuses.

Theemissivityofthethermometercanbechanged

from0.1(10E)to1(100E).Only experienced

personnel should attempt to make changes.

Forinformationrelatingtotheemissivityofspecic

materials,pleasecontactCDN.

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonuntil appearsintheE

lowerleftcornerofthedisplay.Thecurrent

emissivitysettingappearsinthelowerright

cornerofthedisplay

3. PresstheMODEbuttonagaintoadjustthe

emissivityvaluein0.01(1E)incrementsinthe

EmissivityEditMode.âEáappearsinthelower

leftcornerofthedisplay.

4. Pressthe°C/°Fbuttontodecreasethe

emissivityvalue.PresstheLOCKbuttonto

increasetheemissivityvalue.Pressandholdfor

fastadvance.

5. PresstheMODEbuttonagaintoexitEmissivity

EditModeandenterMAXMode.

Note:Non-contactinfraredthermometersarenot

recommendedforuseinmeasuringthetemperatureof

shinyorpolishedmetals.

3. Maximum Mode

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonrepeatedlyuntilMAX

appearsinthelowerleftportionofthedisplay.

3. Aimtheinfraredlensatthetargetandpressthe

triggertodisplaythesurfacetemperature.

4. Measurementcontinuesaslongasthetrigger

ispressedorfor60minutesinLockMode.

TheMAXreadingdisplaysthehighest

temperatureamongmultipletargets.

4. Minimum Mode

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonrepeatedlyuntilMIN

Distance:Spot(FOV)=12:1

Emissivity=0.1~1,Step.01

WaveLength=8µm-14µm

CAUTION: Never point the unit and/or laser towards

anyone’s eyes. Do not look directly into the laser

beams — permanent eye damage may result. Keep

away from children.

appearsinthelowerleftportionofthedisplay.

3. Aimtheinfraredlensatthetargetandpressthe

triggertodisplaythesurfacetemperature.

4. Measurementcontinuesaslongasthetrigger

ispressedorfor60minutesinLockMode.

TheMINreadingdisplaysthelowesttemperature

amongmultipletargets.

5. Difference Mode

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonrepeatedlyuntilDIF

appearsinthelowerleftportionofthedisplay.

3. Aimtheinfraredlensatthetargetandpressthe

triggertodisplaythesurfacetemperature.

4. Measurementcontinuesaslongasthetrigger

ispressedorfor60minutesinLockMode.

TheDIFreadingdisplaysthedifferencebetween

themaximumandminimumtemperaturesof

multipletargets.

6. Average Mode

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonrepeatedlyuntilAVG

appearsinthelowerleftportionofthedisplay.

3. Aimtheinfraredlensatthetargetandpressthe

triggertodisplaythesurfacetemperature.

4. Measurementcontinuesaslongasthetrigger

ispressedorfor60minutesinLockMode.

TheAVGreadingdisplaystheaverage

temperatureofmultipletargets.

7. Error Messages

TheIN1022incorporatesvisualdiagnostic

messagesasfollows:

1. or isdisplayedwhenthetemperatureHI LO

beingmeasuredisoutsidetheinfraredrangeof

theinstrument.

a. HIindicatesthatthetemperatureishigher

than+1022°F/+550°C.

b. LOindicatesthatthetemperatureislower

than-76°F/–60°C.

2. Allowaminimum30minutesforthe

thermometertostabilizetotheworking/room

temperature.

a. ER2isdisplayedwhenthethermometeris

exposedtorapidchangesintheambient

temperature.

b. ER3isdisplayedwhentheambient

temperatureexceeds32°F/0°COR

122°F/50°C.

3. Forallothererrormessagesitisnecessaryto

resetthethermometer.

a. Waitforthethermometertopoweroff.

b. Removethebatteryandwaitforaminimum

ofoneminute.

c. Reinstallthebattery(seeBattery Installation).

d. PresstheMODEbuttonortriggertoturnthe

thermometeron.

e. Iftheerrormessageremains,pleasecontact

CDNforfurtherassistance.

G. Temperature Alerts

1. High Alert

Analertwillsoundwhenthemeasuredtemperature

exceedsthealerttemperaturesetting.

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonrepeatedlyuntil HAL

appearsinthelowerleftportionofthedisplay.

3. Pressthe°C/°FbuttontodecreasetheHigh

Alerttemperature.PresstheLOCKbuttonto

increasetheHighAlerttemperature.Pressand

holdforfastadvance.

4. PressthetriggertoconrmtheHighAlert

temperaturesetting.

2. Low Alert

Analertwillsoundwhenthemeasuredtemperature

exceedsthealerttemperaturesetting.

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonrepeatedlyuntil LAL

appearsinthelowerleftportionofthedisplay.

3. Pressthe°C/°FbuttontodecreasetheLow

Alerttemperature.PresstheLOCKbuttonto

increasetheLowAlerttemperature.Pressand

holdforfastadvance.

4. PressthetriggertoconrmtheLowAlert

temperaturesetting.

H. Battery Status

Thethermometerincorporatesvisualbatterystatus

indication:

1.  measurementsarepossibleBattery OK:

2.  replacebatterywithtwo1.5VBattery Low:

AAAAlkalinecells;measurementsarepossible

3.  replacebattery;Battery Exhausted:

 measurementsarenotpossible

EMC/RFI

Readingsmaybeaffectediftheunitisoperatedwithinaradio

frequency electromagnetic eld strength of approximately

3voltspermeter,buttheperformanceoftheinstrumentwill

notbepermanentlyaffected.

Product specificaties

Merk:	CDN
Categorie:	Thermometer
Model:	IN1022

Heb je hulp nodig?

Als je hulp nodig hebt met CDN IN1022 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Thermometer CDN

CDN IN482 Handleiding

10 Juni 2025

CDN ProAccurate GTS800X Handleiding

10 Juni 2025

CDN DTL572 Handleiding

10 Juni 2025

CDN DTP392 Handleiding

10 Juni 2025

CDN ProAccurate FG80 Handleiding

10 Juni 2025

CDN IN1022 Handleiding

10 Juni 2025

CDN ProAccurate RFT1 Handleiding

9 Juni 2025

CDN ProAccurate INTP662 Handleiding

9 Juni 2025

CDN TCG400 Handleiding

9 Juni 2025

CDN TCF400 Handleiding

9 Juni 2025

Handleiding Thermometer

Nieuwste handleidingen voor Thermometer

Comark N9002 Handleiding

10 Juni 2025

Taylor 5286344 Handleiding

10 Juni 2025

NEO Tools 75-275 Handleiding

10 Juni 2025

NEO Tools 75-276 Handleiding

10 Juni 2025

Beurer FT 17 Handleiding

6 Juni 2025

Beurer FT 16 Handleiding

2 Juni 2025

Rossmax BP5 Handleiding

25 Mei 2025

Sogo SS-14055 Handleiding

20 Mei 2025

Elektrobock CN-TH2 Handleiding

12 Mei 2025

Medisana TM 670 Handleiding

19 April 2025