Xaoc Tallin Handleiding
Xaoc
Niet gecategoriseerd
Tallin
Bekijk gratis de handleiding van Xaoc Tallin (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 340 mensen en kreeg gemiddeld 4.3 sterren uit 170.5 reviews. Heb je een vraag over Xaoc Tallin of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
dual discrete
core voltage
controlled
amplifier
Model of 1956
operator’s manual rev. 1956/1.0
Thank you for purchasing this Xaoc Devices
product. Tallin is a dual voltage controlled
unusual control features and a range of at-
tractive tonal characteristics. Each of the two
identical channels offers two simultaneously
available inputs for voltage control over sig-
nal attenuation or gain, with linear and expo-
nential response to CV. Volume control knobs
offer manual gain settings ranging from fully
-
cator displays output signal levels. A soft-clip
circuit avoids harsh clipping distortion, while
a switchable overdrive circuit offers two care-
fully crafted distortion responses, simulating
Since both CV inputs are simultaneously
active, they can be jointly exploited within
patches featuring more complex volume con-
trol that otherwise would require using two
traditional VCAs in series. As the signal path
is DC-coupled, Tallin can also be used for han-
dling the control voltages.
The module requires 6hp worth of free space
in the eurorack cabinet. The ribbon type pow-
er cable must be plugged into the bus board,
paying close attention to polarity orientation.
The red stripe indicates the negative 12V
rail and is supposed to match the dot, –12V,
or red stripe marks on both the unit and
the bus board. The module itself is secured
against reversed power connection, however,
reversing the 16-pin header may cause seri-
ous damage to other components of your sys-
tem, because it will short-circuit the +12V and
+5V power rails. The module should be fas-
tened by mounting the supplied screws before
powering up. To better understand the device,
we strongly advise reading through the entire
manual before using the module.
Tallin consists of two completely independent
but functionally identical channels, a and b
-
transistor pair and multiple feedback topolo-
present in other VCAs that use mathemati-
cally precise and sonically pure integrated
gain cell VCA chips. With Tallin, we opted for a
discrete core, to provide a thick and charming
The signal inputs accept Eurorack signal
levels (typically 10Vpp, but capable of handling
-
reserve of up to +18dB. The knobs control
the attenuation or gain by scaling the corre-
sponding control voltages. Thus, in a posimin -
tion, they fully silence the channel, regardless of
whatever control voltage is applied to the VCA.
Turning a knob up will gradually open the VCA,
o’clock position (depending on the control volt-
There are two CV inputs in each channel, re-
spectively featuring an exponential and
linear control response. Both controls
are available simultaneously, and they jointly
determine the gain of the VCA. A CV of 0V at
module
explained
fig. 1
controls
overview
fig. 1
Product specificaties
| Merk: | Xaoc |
| Categorie: | Niet gecategoriseerd |
| Model: | Tallin |
Heb je hulp nodig?
Als je hulp nodig hebt met Xaoc Tallin stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Xaoc
20 Juli 2025
30 Januari 2025
7 Januari 2025
31 Augustus 2024
3 Augustus 2023
3 Augustus 2023
3 Augustus 2023
3 Augustus 2023
3 Augustus 2023
3 Augustus 2023
Handleiding Niet gecategoriseerd
- CaviLock
- Racktime
- Morningstar
- Homelite
- GOTIE
- Harder & Steenbeck
- Reebok
- IKEA
- Kostal
- Therabody
- Lanaform
- HIOAZO
- Kogan
- Mermade
- HomeCraft
Nieuwste handleidingen voor Niet gecategoriseerd
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025