Walrus Audio Lore MKII Handleiding
Pagina's 8 Niet gecategoriseerd
Bekijk de handleiding van Walrus Audio Lore MKII gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
INSTRUCTION MANUAL
v.1 - 10/13/26
help@walrusaudio.comwalrusaudio.com
2
Feedback: Controls the amount of gain in the first feedback path.
Modes 1, 2, 3 – Control the amount of delay repeats.
Mode 4 – Controls the amount of octave-down added to reverse reverb along
with the reverse reverb feedback amount.
Mode 5 – Controls the amount of pitched delay repeats.
Regen (Regeneration): Controls the amount of gain in the second feedback path.
Mode 1 – Controls the feedback of the reverse reverb.
Mode 2 – Controls the amount of octave-up delay repeats feeding into the
reverb tank.
Mode 3 – Controls the amount of octave-down delay repeats feeding into
the reverb tank.
Mode 4 – Controls the amount of octave-up added to reverse reverb, along
with the reverse reverb feedback amount.
Mode 5 – Controls the amount of pitched delay repeats.
Mod (Modulation): Controls the amount of modulation applied to the wet signal.
Mix: Controls the amount of wet/dry mix.
Fully left = dry. Fully right = wet.
X: The X knob changes jobs depending on which mode is selected.
Mode 1 – Controls how reversed your delay trails are before being processed
by the reverse reverb: left is least reversed, right is fully reversed.
Modes 2, 3, 4 – Controls the decay time of the reverb.
Mode 5 – Changes the order of the 4th, 5th, and octave intervals that the
pitch delay steps through.
Time:Controls the delay time of the repeats for modes 1, 2, 3, and 5, and controls
time stretching of the reverbs for Mode 4.
Tone:Shapes the overall tone of the wet signal. With this synth-style low-pass filter,
you can explore different tone options.
At minimum, this closes the filter entirely, only letting through lower
frequencies.
At max, this opens the filter, letting through the full range of your signal’s
frequencies.
Tweak Button: Selects which of the five parameters the
Tweak knob adjusts.
Adjusts the amount of sonic width applied to Width:
the left and right wet outputs.
Rate of modulation LFO from 0.1 Hz to 5 Hz.Mod Rate:
Selection between Sine, Square, and Mod Shape:
Random modulation LFO shapes.
Target sample rate of the Dive / Rise effect from Shift:
0.5x to 2x.
Ramp rate of the Dive / Rise feature from 1x Ramp:
sample rate to Shift rate and back from 50ms to
5000ms.
Controls
3
Mode Button: Selects from the five available modes.
Reverse Delay into Reverse Reverb.Mode 1:
Reverse Delay into Octave-Up Reverb.Mode 2:
Reverse Delay into Octave-Down Reverb.Mode 3:
Reverse Reverb into Forward Reverb.Mode 4:
Pitch Delay into Pitch Delay.Mode 5:
See pages 5-6 for full program descriptions.
Trails: The Lore can run in Trails or No Trails mode. In Trails mode, when you turn the
pedal off, the reverb / feedback decay dies off naturally. In No Trails mode, the
decay is abruptly cut off when you turn the pedal off. The Lore ships with Trails
mode on.
To toggle between either Trails modes:
1.Hold down the bypass switch while applying power to the pedal.
2.After approximately four seconds, the Tap/Shift LED will rapidly blink for 1
second, confirming you have changed Trails mode.
3.A rapid blue LED confirms you are in Trails mode. A rapid green LED confirms
you are in No Trails mode.
4.Repeat the process to change modes again.
Tap Tempo: Tap to control the time knob parameters:
Modes 1, 2, 3: Controls the delay time of the repeats.
Mode 4: Controls reverb time stretching, creating a larger or smaller space.
Mode 5: Controls the delay time of the repeats.
The tap LED will blink with the tapped tempo, or the tempo set by
the Time knob.
Shift: Holding down the Tap/Shift switch will momentarily shift the clock
rate of the pedal down or up and will hold it at that rate for as long as the
switch is pressed.
NOTE: In Mode 4, the Time control affects the same time-stretching/sample-
rate modulation process as the Shift control. If the Time and Shift Target
controls are set to the same value, activating Shift will produce no audible
effect because the sample rate will remain constant. To regain use of the Shift
effect, simply set the Time and Shift Target controls to different values.
This interaction can also be used creatively to produce larger sample-rate
jumps than are available in the other modes!
Product specificaties
| Merk: | Walrus Audio |
| Categorie: | Niet gecategoriseerd |
| Model: | Lore MKII |
Heb je hulp nodig?
Als je hulp nodig hebt met Walrus Audio Lore MKII stel dan hieronder een vraag en andere gebruikers zullen je antwoorden