Walrus Audio Fundamental Reverb Handleiding

Walrus Audio Niet gecategoriseerd Fundamental Reverb

Lees hieronder de 📖 handleiding in het Nederlandse voor Walrus Audio Fundamental Reverb (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
*The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Got questions or need a repair?
Email help@walrusaudio.com to talk with a real live human about your Walrus gear!
This product comes with a limited lifetime warranty.
Click Here for more info.
The Fundamental Delay provides you with the core sounds
of repeated effects. With three delay algorithms, you
can go from clean digital feedback to an analog delay
emulation, as well as reversing your trails.
9 volt DC, Center Negative • 100mA min*
Time: Controls the rate of the
delayed repeats.
Feedback: Controls the number of
delay repeats.
Mix: Controls the mix of the effect
and the original clean signal. All the
way to the left outputs a fully clean
signal, and all the way to the right
outputs only the delay repeats (100%
wet).
CO
CO
CO
CON
N
N
NT
T
T
TR
R
R
ROL
OL
OL
OLS
S
S
S
Enter tap mode by holding the
bypass switch until the LED begins
flashing. Once the LED is flashing,
tap mode is engaged and the
bypass switch will now function as
a tap tempo switch.
Exit tap mode by holding down the
bypass switch until the LED stops
flashing and returns to solid white.
The pedal will remember the tempo
you have tapped in until adjusted
again by either the time control or
another tempo is tapped in.
Tap Divisions
While in tap mode, the mode switch
will only change the division of
the tap control and not the delay
program.
Left = quarter ( )
Middle = dotted eighth ( )
Right = eighth ( )
Digital: Add a clean rhythmic delay back into your
signal, with transparent repeats.
Analog: Add a filtered and slightly distorted
delay back into your signal, designed to
replicate the characteristics of bucket brigade
delay chips.
Reverse: Add reversed trails back into your
signal, create gentle melodies, or push into
reverse feedback overload.
mode
mode
mode
modes
s
s
s
t
t
t
ta
a
a
ap
p
p
p MODE
MODE
MODE
MODE &
&
&
&
T
T
T
Ta
a
a
ap
p
p
p di
di
di
div
v
v
vis
is
is
isions
ions
ions
ions
The Delay comes with trails mode active by default, to
disengage trails mode hold down the bypass stomp switch
when applying power to the pedal. Once the LED flashes it
indicates that trails mode is turned off. To re-engage trails
mode, repeat the process, and wait for the LED to turn dark,
indicating that trails mode is back on. With trails mode
active, your delay repeats will fade off naturally after turning
the pedal off. With trails mode inactive, the decay abruptly
cuts off when you turn off the pedal.
T
T
T
TR
R
R
RA
A
A
AI
I
I
IL
L
L
LS
S
S
S mode
mode
mode
mode
Find the full
Fundamental Series at
walrusaudio.com


Product specificaties

Merk: Walrus Audio
Categorie: Niet gecategoriseerd
Model: Fundamental Reverb

Heb je hulp nodig?

Als je hulp nodig hebt met Walrus Audio Fundamental Reverb stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Walrus Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd