Walrus Audio Fundamental Lo-Fi Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van Walrus Audio Fundamental Lo-Fi gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
INSTRUCTION
MANUAL v.1
help@walrusaudio.comwalrusaudio.com
Time:Sets the time between delayed repeats.
Move the slider left to bring the echoes closer
together, or right to add more space between
each repeat. Max delay time is 1 second.
Feedback: Controls the number of delay repeats.
Move the slider left for a single echo, or right for
long, evolving trails that approach infinite repeats.
Mix: Controls the mix of the effect and the original
clean signal. All the way to the left outputs only
the fully dry signal, and all the way to the right
outputs only the delay repeats at 100% wet.
AM:A bright delay with a high-pass filter, light harmonic
distortion, and dual wow and flutter modulation on
the repeats that melt away into a hazy backdrop full of
character and gentle pitch movement. You’ll hear echoes
degrade and thin almost like they’re coming through a
fading AM radio signal, creating a texture that works well
for dreamy leads, open chords, and washy backdrops.
Murk:Dark, dense, and responsive. Murk rolls off
the high end and adds heavy distortion with dual
low-frequency modulation to push repeats into a
thick, undulating cloud. Discover slow modulation
that makes the delay compress and expand with
the dynamics of your playing, making it ideal for
shadowy ambience, brooding melodies, and worn
lo-fi textures.
Keep Feedback low to add shadowy movement
under your riffs. Push it higher to build repeats into a
pulsing cloud that swells and shifts around every note.
Echo: A rhythmic, multi-tap delay with analog-style tone shaping. At short delay
times, the taps gather into dense, lo-fi ambience that sits between an echo and a
reverb. At longer delay times, they spread into syncopated, hypnotic patterns that
can add movement and cascading trails that weave around your playing, or help
you lock into a new groove.
The Lo-Fi Delay comes with trails mode active by default. To turn
trails mode off, hold down the bypass stomp switch when applying
power to the pedal. The LED will flash to confirm that trails mode
is turned off. To re-engage trails mode, repeat the process, and
wait for the LED to turn dark, indicating that trails mode is back
on. With trails mode active, your delay repeats will fade naturally
after turning the pedal off. With trails mode inactive, the repeats
will stop immediately when the pedal is bypassed.
Enter tap mode by holding the bypass switch until the LED begins
flashing. Once the LED is flashing, tap mode is engaged, and the
bypass switch will function as a tap tempo switch.
Exit tap mode by holding the bypass switch until the LED stops flashing
and returns to solid white. The pedal will remember the tapped tempo
until you move the Time slider or tap a new tempo.
Tap Divisions:While in tap mode, the mode switch changes the tap
division instead of the delay mode. Tap in a tempo and then use the
three-way switch to select the increments.
Note: A tempo must be tapped in before changing tap
division. If the Time slider is adjusted, it will override the previously
tapped tempo and previously selected tap division.
Left: Quarter note ( )
Middle: Dotted eighth note ( )
Right: Eighth note ( )
Product specificaties
| Merk: | Walrus Audio |
| Categorie: | Niet gecategoriseerd |
| Model: | Fundamental Lo-Fi |
Heb je hulp nodig?
Als je hulp nodig hebt met Walrus Audio Fundamental Lo-Fi stel dan hieronder een vraag en andere gebruikers zullen je antwoorden