Walrus Audio Iron Horse Handleiding
Walrus Audio
Niet gecategoriseerd
Iron Horse
Bekijk gratis de handleiding van Walrus Audio Iron Horse (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.6 sterren uit 6 reviews. Heb je een vraag over Walrus Audio Iron Horse of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
9 volt DC, Center Neg.
100ma min*
Output Jack
Bypass Switch
Bypass LED
Input Jack
*The use of an isolated p all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Got questions?
help@walrusaudio.com
Need a repair?
repairs@walrusaudio.com
All our pedals come with a limited lifetime warranty.
walrusaudio.com/pages/warranty-and-repair for more info.
For life advice, refer to Buzzfeed’s top 10 lists.
WALRUSAUDIO.COM
LEVEL – Controls the output level.
TONE – Allows specific adjustment of high-end/treble frequencies
Turn clockwise to increase high/treble frequencies and counterclockwise to
decrease high/treble frequencies.
DISTORTION – Adjusts the distortion output. Turn clockwise to increase the
amount of distortion. As it is increased, the signal becomes louder, thicker
and more distorted. Turn counterclockwise to decrease the amount o
distortion.
Si/LED KNOB – Blend between Silicon and LED clipping. When the knob
is set to the left, the distorted signal will be using Silicon clipping diodes
adding in a high amount of compression. Rotating the knob to the righ
will bring in LED clipping and a smaller amount of compression. Putting the
knob at noon will blend between the two using different ratios of the Silicon
and LED clipping diodes for more complex clipping sounds.
Note: Since the Si/LED knob is changing the internal gain and clipping style
the other controls will behave slightly differently as well. You will need to
use the volume knob to adjust the overall output up or down depending on
where you have the knob set.
GOT THAT RHYTHM PUNK ENOUGH
ele, Single coils, neck position. SG, Humbuckers, bridge position
vol voltone tonedistortion distortion
The Iron Horse is our take on a classic
distortion circuit that’s thick, punchy,
riffy, and rowdy. With the help of the
Si/LED knob and wide range of the
distortion knob, this true bypass, high-
gain behemoth can be finely tuned for
clear overdriven sounds or let the reigns
loose for a full-on distorted onslaught.
Top mount jacks with soft switch
bypassing and art by David Hüttner
complete the package for a pedal board-
ready distortion machine.
Need a place to start?
Here’s a few settings we like:
SHREDDY MCSHRED
LP, P90s, bridge position.
vol tone distortion
Product specificaties
| Merk: | Walrus Audio |
| Categorie: | Niet gecategoriseerd |
| Model: | Iron Horse |
Heb je hulp nodig?
Als je hulp nodig hebt met Walrus Audio Iron Horse stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Walrus Audio
18 Juni 2025
15 Juni 2025
3 Juni 2025
24 Mei 2025
24 Mei 2025
14 Januari 2025
7 Januari 2025
14 December 2024
10 December 2024
14 November 2024
Handleiding Niet gecategoriseerd
- Vornado
- Expobar
- Soehnle
- RF Elements
- Valeo
- Anybus
- Grasslin
- Tiny Love
- StarIink
- Cresta
- Garritan
- Miggo
- AXESS
- Netgear
- Jane
Nieuwste handleidingen voor Niet gecategoriseerd
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025