VTech RM7766-2HD Handleiding

Bekijk gratis de handleiding van VTech RM7766-2HD (2 pagina’s), behorend tot de categorie Babyfoon. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over VTech RM7766-2HD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Go to www.vtechbabycare.com

to register your product for

enhanced warranty support and

latest VTech product news.

Congratulations

on purchasing your new VTech product.

Before using this baby monitor, please read the Important safety instructions.

FrequencyBaby unit: 2402 - 2480 MHz ( cover all WiFi, FHSS, BLE )

Max Transmit power is 10mW ( cover all WiFi, FHSS, BLE )

Parent unit: 2406 - 2475 Mhz

Max Transmit power is 100mW

LCD7’’ Color LCD (IPS 1280x800 pixels)

Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range may

vary according to environmental conditions at the time of use.

Power requirementBaby unit power adapter: Output: 5V DC, 1.5A.

Parent unit power adapter: Output: 5V DC, 2A.

Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery

Specifications are subject to change without notice.

© 2024 VTech Communications, Inc.

All rights reserved. 10/24. RM7766-XHD_QSG_V6

Technical specications

Android

TM

and Google Play

TM

are trademarks of Google Inc.

App Store is a trademark of Apple Inc., registered in the U.S. and other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

UL STD.

62368-1

CERTIFIED TO

CSA STD.

C22.2 NO.62368-1

CONFORMS TO

RM7766HD

RM7766-2HD

7” Smart Wi-Fi 1080p

Pan & Tilt Monitor

Disclaimer and Limitation of Liability

VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss

resulting from the use of this user’s manual. VTech Communications, Inc. and its suppliers assume no

responsibility for any loss or claims by third parties that may arise through the use of this product.

Company: VTech Communications, Inc.

Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States

Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada

Quick start guide

RM7766HD

RM7766-2HD

For more support information

S

m

CABLE MANAGEMENT

123

What’s in the box

x 2

x 2

Quick start guide

Strangulation

Hazard

Keep this cord out of reach of children.

The cord needs to be at least three feet

away from the child at all times. Do not

use with an extension cord. Do not

remove this tag.

Éloignez ce cordon des enfants. Le

cordon doit se trouver à au moins trois

pieds d’un enfant et ce, en tout temps.

N’utilisez pas de rallonge. Ne retirez pas

cette étiquette.

Mantenga este cable fuera de la alcance

de los niños. Este cable debe estar por

lo menos tres pies fuera de la alcance

del niño en todo momento. No lo use

con una extensión inalámbrica. No quite

esta etiqueta.

Risque

d’étranglement

Riesgo de

estrangulación

1 set for RM7766HD

2 sets for RM7766-2HD

Strangulation

Hazard

Keep this cord out of reach of children.

The cord needs to be at least three feet

away from the child at all times. Do not

use with an extension cord. Do not

remove this tag.

Éloignez ce cordon des enfants. Le

cordon doit se trouver à au moins trois

pieds d’un enfant et ce, en tout temps.

N’utilisez pas de rallonge. Ne retirez pas

cette étiquette.

Mantenga este cable fuera de la alcance

de los niños. Este cable debe estar por

lo menos tres pies fuera de la alcance

del niño en todo momento. No lo use

con una extensión inalámbrica. No quite

esta etiqueta.

Risque

d’étranglement

Riesgo de

estrangulación

Product Recycling

Recycle this product when you are done with it.

For more information, scan the QR code

or visit www.vtechbabycare.com.

Overview

Parent unit icons

Parent unit overview

1LINK LED light

• On when the parent unit is linked to the

baby unit.

• Flashes when the link to the baby unit

is lost.

2

LED light

• On when the parent unit is connected to

AC power, and the battery is charging.

• Flashes when the parent unit battery is

low and needs to be charged.

33- level sound indicator light

The lights indicate different sound levels

detected from the baby unit.

• Green light: low sound level.

• Green and amber lights: moderate

sound level.

• Green, amber, and red lights: high

sound level.

4

TALK /

• Press and hold to talk through the baby

unit when displays on screen.

• While in a sub-menu, press to exit.

5MENU

|

SELECT

• Press to enter the main menu.

• While in a menu, press to choose an

item, or save a setting.

6

|

|

|

Arrow keys

• Press to navigate leftward, upward,

rightward or downward, within the

main menu and sub-menus.

• Press to move the baby unit camera

leftward, rightward , upward or

downward.

7

|

• Increase, decrease or mute the parent

unit volume.

8

Zoom

• Press to zoom in/out to different levels.

9

Power

|

LCD ON/OFF

• Press and hold to turn on/off the power.

• Press to turn on/off the LCD screen.

10

Microphone

11Antenna

12Speaker

13Power jack

14RESET

• Force reboot the parent unit.

15Stand

2

1

3

4

5

6

7

8

9

10

15

14

13

12

11

The applied nameplate is located at the bottom of the baby unit’s base.

When using your equipment, basic safety precautions should always

be followed to reduce the risk of fire, electric shock and injury,

including the following:

1. Follow all warnings and instructions marked on the product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above 6.5 feet

(2 meters).

4. This product is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not be

used as such.

5. This product is not intended for use as a medical monitor.

6. Do not use this product near water, for example, near to a bath,

sink, swimming pool or shower.

7. CAUTION: Use only the internal, non-user replaceable battery

fitted to the parent unit. There may be a risk of explosion if a

wrong type of battery is used for the parent unit. The battery

cannot be subjected to high or low extreme temperature

and low air pressure at high altitude during use, storage

or transportation. Disposal of battery in fire or a hot oven,

mechanically crushing or cutting the battery can result in an

explosion. Leaving the battery in an extremely high temperature

surrounding environment can result in an explosion or the

leakage of flammable liquid of gas. Battery subjected to

extremely low air pressure may result in an explosion or the

leakage of flammable liquid or gas. Dispose of used battery

according to the information in The RBRC seal.

8. Use only the adapters included with this product. Incorrect

adapter polarity or voltage can seriously damage the product.

Power adapter information:

Baby Unit Output: 5V DC 1.5A

VTech Telecommunications Ltd.

Model: VT07EUS05150

-OR-

Jiangxi Jian Aohai Technology Co., Ltd.

Model: A938-050150W-US1

Parent Unit Output: 5V DC 2A

VTech Telecommunications Ltd.

Model: VT07EUS05200

-OR-

Jiangxi Jian Aohai Technology Co., Ltd.

Model: A938-050200W-US1

Rechargeable battery information:

3.7V 5000mAh, 18.5Wh Lithium-ion battery

Zhuhai Great Power Energy Co., Ltd.

Model: GSP806090-5Ah-3.7V-1S1P

9. The power adapter is intended to be correctly oriented in a

vertical or floor mount position. The prongs are not designed to

hold the plug in place if it is plugged into a ceiling, under-the-

table or cabinet outlet.

10. For pluggable equipment, the socket-outlet (power adapter)

shall be installed near the equipment and shall be easily

accessible.

11. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

12. Do not modify the power adapters or replace with other

adapters, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not install

this product where the cords may be walked on or crimped.

14. This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of

the type of power supply in your home, consult your dealer or

electricity supply provider.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf, stand or

other unstable surfaces.

17. This product should not be placed in any area where proper

ventilation is not provided. Slots and openings in the back or

bottom of this product are provided for ventilation. To protect

them from overheating, these openings must not be blocked by

placing the product on a soft surface such as a bed, sofa or rug.

This product should never be placed near or over a radiator or

heat source.

18. Never push objects of any kind into this product through

the slots because they may touch dangerous voltage points

or create a short circuit. Never spill liquid of any kind on the

product.

19. To reduce the risk of electric shock, do not disassemble

this product, but take it to an authorized service facility.

Disassembling or removing parts of the product other than via

the battery door (if applicable) may expose you to dangerous

voltages or other risks. Incorrect reassembling can cause electric

shock when the product is subsequently used.

20. You should test the sound reception every time you turn on the

units or move one of the components.

21. Periodically examine all components for damage.

22. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless telephones,

etc. To protect your privacy, make sure the product has

never been used before purchase, reset the baby monitor

periodically by powering off and then powering on the units,

and power off the baby monitor if you will not use it for some

time.

23. Children should be supervised to ensure that they do not play

with the product.

24. The small parts of this monitor can be swallowed by babies or

small children. Keep these parts out of reach of children.

25. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance

by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

• Use and store the product at a temperature between 32

o

F and

104

o

F.

• Mishandling batteries can cause burn, fire or explosion hazards.

• Do not expose the product to extreme cold, heat or direct

sunlight. Do not put the product close to a heating source.

• Warning—Strangulation Hazard—Children

have STRANGLED in cords. Keep this cord out of the

reach of children (more than 3 ft (0.9m) away). Do

not remove warning label on the adapter cord.

• Never place the camera unit(s) inside the baby’s crib or playpen.

Never cover the camera unit(s) or parent unit with anything such

as a towel or a blanket.

• Other electronic products may cause interference with your

camera unit. Try installing your camera unit as far away from

these electronic devices as possible: wireless routers, radios,

cellular telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and cordless

telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent research

entity, led a multidisciplinary evaluation of the interference between

portable wireless devices and implanted cardiac pacemakers.

Supported by the U.S. Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the pacemaker,

such as in a breast pocket, when it is turned ON.

WTR’s evaluation did not identify any risk to bystanders with

pacemakers from other persons using wireless devices.

Electromagnetic elds (EMF)

This VTech product complies with all standards regarding

electromagnetic fields (EMF). If handled properly and according to

the instructions in this user’s manual, the product is safe to be used

based on scientific evidence available today.

Important safety instructions

1Light sensor

2Camera lens

3Infrared LEDs

• Allow you to see clearly in a dark environment.

4Microphone

5Night Light

6

Night Light Control Key

• Single Tap: Turn on/off.

• Tap and hold (with the light turned on):

Adjust night light brightness.

7

LED indicator

It is set to off by default. You can turn it on using

the app (Setting > Camera Setting > LED status).

In direct mode:

• Orange is steadily on when the baby unit is

connecting to the parent unit.

• Orange flashes slowly during video

streaming.

In Wi-Fi mode:

• Green is steadily on when the baby unit is

connected to Wi-Fi.

• Green flashes slowly during video streaming to

Wi-Fi.

8ON/OFF switch

9Speaker

10Temperature sensor

11Power jack

12Wall mount slots

13PAIR

• To enter pairing mode, press and hold the

PAIR key for three seconds until you hear a

beep sound. Then follow the app instructions

to connect the camera to a 2.4GHz Wi-Fi

network.

• To reset the baby unit, press and hold the

PAIR key until you hear a beep sound.

Release the PAIR key, and then press it key

again five times until you hear another beep

sound. The baby unit will emit another beep

when the reset is complete. After that, the

baby unit will reboot.

7

8

9

10

4

6

5

2

11

12

13

1

3

7

8

9

10

4

6

5

2

11

12

13

1

3

Baby unit overview

7

8

9

10

4

6

5

2

11

12

13

1

3

Protect your privacy and online security

How the system works

VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-

recommended best practices to help keep your wireless connection private and your devices protected

when online. We recommend you carefully review and consider complying with the following tips.

Ensure your wireless connection is secure.

• Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-

PSK with AES” setting in your router’s wireless security menu.

Change default settings.

• Change your wireless router’s default wireless network name (SSID) to something unique.

• Change default passwords to unique, strong passwords. A strong password:

- Is at least 10 characters long.

- Is complex.

- Does not contain dictionary words or personal information.

- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.

Keep your devices up to date.

• Download security patches from manufacturers as soon as they become available. This will ensure

you always have the latest security updates.

• If the feature is available, enable automatic updates for future releases.

Disable Universal Plug and Play (UPnP) on your router.

• UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network

devices to open inbound ports without any intervention or approval from you. A virus or other

malware program could use this function to compromise security for the entire network.

For more information on wireless connections and protecting your data, please review the following

resources from industry experts:

1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips –

www.fcc.gov/consumers/guides/how-protect-yourself-online.

2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet –

www.us-cert.gov/ncas/tips/ST15-003.

3. Federal Trade Commission: Using IP Cameras Safely –

https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.

4. Wi-Fi Alliance: Discover Wi-Fi Security –

http://www.wi-fi.org/discover-wi-fi/security.

Direct mode

Your baby monitor parent unit and baby unit connect to each other in Direct mode by

default, which allows you to immediately stream video out of the box.

Local access

FHSS link

You may experience reduced signal

strength if your parent unit and baby

unit are far apart, or there are

obstructing factors, such as internal

walls, between them. Move the parent

unit closer to the baby unit to improve

the signal strength. Ensure the parent

unit antenna is raised for optimum

reception.

Wi-Fi mode

To enhance your experience and

enjoy seamless live video streaming

via your mobile app, and to receive

product software updates (when

available), we highly recommend

setting up your monitor’s Wi-Fi

connection.

It uses your 2.4GHz home Wi-Fi

network to connect your video

monitor and supports live video

streaming through the mobile app.

To stream live video remotely with

your mobile device, download and

install the MyVTech Baby Plus mobile app. With the mobile app, your Wi-Fi router (not

included) provides Internet connectivity to your HD video monitor system. It serves as a

communication channel between your baby unit and mobile device, allowing you to monitor

and/or control your baby unit wherever you are. For more details, see Download app for

mobile access section in this quick start guide.

To receive product rmware updates, this baby monitor requires connecting to a

2.4GHz home Wi-Fi network.

Mobile access

Local access

FHSS link

WARM

WARM

Main

Menu

Sub-

menu

Options

Monitoring mode (For RM7766-2HD only)

• View baby units in Single mode.

• View baby units in Patrol mode

(switch view every 10 seconds).

• View baby units in Split screen.

Night light

On/Off

• Toggle the night light on or off.

Color

• Select a night light color.

• Customized color is available if your

baby unit is paired with MyVTech

Baby Plus app.

Brightness

• Adjust the night light brightness.

• Set the brightness to AUTO adaptive

ambience.

Timer

• Set the timer to turn the night light off

after 15, 30 or 60 minutes, or always on.

Melodies and soothing sounds

Play/Stop

• Toggle between play and stop.

Library

• Select to play all melodies, or play one

of the five melodies or five soothing

sounds.

Camera Volume

• Adjusts baby unit speaker volume.

Timer

• Set the timer to stop playing after 15, 30

or 60 minutes, or play non-stop.

General settings

Connect to Mobile App

• Instructions for adding baby unit to

mobile app.

Camera Volume

• Adjusts baby unit speaker volume.

Main

Menu

Sub-

menu

Options

Screen Brightness

• Adjusts parent unit screen brightness.

Screen Off Timer

• Turn the screen off timer OFF, or set

the screen to turn off after 1, 3 or 5

minutes when no sound is detected.

• Select AUTO to set the Sound Sensitivity

level for auto screen on when a sound is

detected over the set level.

Temperature Format

• Set the temperature display format

between Celcius or Fahrenheit.

Others

• Time Settings, Reset settings, Software

Update.

Alerts Settings

• Adjust alerts volume level.

Motion Detect

• Turn the motion detection alert on/off.

• Adjust Motion Sensitivity level for

waking the parent unit screen.

Low Medium High

Temperature

• Turn the temperature alert on/off.

• Select the temperature alert maximum

and minimum temperature limits.

Low Battery

• Toggle the low battery alert on or off.

Lost Link

• Toggle the lost link alert on or off.

Help and info

Help

• Support Information

How-to Video

• Support video

System Info

• System Information

Status icons

Direct mode

Parent unit and baby unit are connected to

each other directly.

Signal strength is indicated by the signal

icon(s) on the right.

The red bar(s) indicates no connection.

Wi-Fi mode

The signal icon(s) on the left indicate the

baby unit is connected to a home Wi-Fi

network. The red icon(s) indicates no

connection.

Baby unit 1 and 2 are being viewed in Patrol

mode (For RM7766-2HD only).

Baby unit 1 and 2 are being viewed in Split

mode (For RM7766-2HD only).

Status icons

Night vision is turned on.

Motion detection alert is turned on.

Melodies and soothing sounds are playing.

Night light is turned on.

Auto night light brightness is activated.

Temperature alert is turned on.

Parent unit is muted.

Temperature measured at baby unit.

Battery level indicator

Low battery indicator

• Please peel off the lens/screen protector before use.

• Charge the parent unit battery before use.

• When powering up, the baby unit’s orange status LED turns on. It will

turn off after a while and remain off if the status LED is set to off.

• The status LED is set to off by default. You can turn it on using the app

(Setting > Camera Setting > LED status).

• The baby unit may get warm during use. This is normal.

For optimum reception, raise the parent unit antenna.

Connect the Parent Unit and Baby Unit to the adapter and mains supply.

Slide the switch to ON to power on the

Baby Unit.

The Parent Unit turns on automatically

after connection to the power socket.

1

2

3

Connect, charge and power on the baby

monitor

Download app for mobile access

Use the MyVTech Baby Plus on your mobile device to monitor your baby

remotely. Follow the instructions below to set up and pair your baby monitor

with the app.

1. Scan the QR code to download the free MyVTech Baby Plus mobile app,

or search “MyVTech Baby Plus” on App Store or Google Play Store. If you

have previously installed the app, ensure that you have the latest version.

2. Tap

P

L

U

S

P

L

U

S

to launch the mobile app on your device and create an account.

3. We recommend that you use common webmail services, such as Google Gmail, to

register your user account. Check your email (including the Spam folder) and activate

your new account by entering the email verification code. Then, sign in to your account.

4. Ensure that you are connected to a 2.4GHz Wi-Fi network and have enabled Bluetooth

and Location Service on your device.

5. After signing in to the app, select Camera(s) with Parent unit and scan the QR code

displayed on the parent unit. To find the QR code, press the MENU/SELECT button and

go to > Connect to Mobile App.

6. Input the Wi-Fi password.

7. Press and hold the pair key on the baby unit for 3 seconds until you hear the beep

sound to enter pairing mode.

8. Select the camera model that appears in the app and wait for the camera to connect.

Once connected, it will display a live view preview.

9. Select “Continue” and create a profile for your baby (optional). Now you can start

monitoring! (For models with 2 cameras, a pop-up will ask if you wish to connect another

camera. Repeat steps 7-9 for the second camera.)

P

L

U

S

P

L

U

S

• Make sure your mobile device meets the

minimum requirement for the mobile app.

Minimum requirement

The mobile app is compatible with:

• Android

TM

9.0 or later; and

• iOS 14 or later.

Use Camera Sharing to instantly share access to the camera. Follow these steps:

1. Go to Menu and select Camera Sharing.

2. Choose “Invite People” and enter the name and email address of the family member’s app

account.

3. The family member will receive a pop-up notification in the app and can accept the

invitation to access the camera(s).

Low Medium High

Product specificaties