Vaxcel Lodge WL33041 Handleiding


Pagina's 2 Niet gecategoriseerd

Bekijk de handleiding van Vaxcel Lodge WL33041 gratis online of download de PDF. 18 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WL33041NS
T
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read
and save these instructions.
Hardware Package (included):
Mounting Screw (B)Wire Connector (C)
Bolt Nut (D)
Mounting Plate Unit (A)
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
1. Unscrew the two bolt nuts (D), remove the mounting plate unit (A) from the backplate.
2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of
the preinstalled fixture mounting screws if necessary.
Note: Make sure that two fixture mounting screws are lined up horizontally to make the fixture level.
3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
• Connect the hot wire (black insulation) from the fixture to the black wire from the power source.
• Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.
• Attach the fixture ground wire (bare wire) to the mounting plate unit (A) with green ground screw, then
depending on local code, connect it to the house ground wire with the wire connector (C).
Carefully put all of the wires back into the outlet box.
Turn off the power at fuse or circuit box.
Installation Steps
Page 1 / 2
Fixture Wire
Harp
Shade
Wire Connector (C)
House Ground Wire
Outlet Box
Mounting Screw (B)
Green Ground Screw
Mounting Plate Unit (A)
Bolt Nut (D)
Socket
Candle Tube
Fixture Ground Wire
Fixture Mounting Screw
Backplate
230526

Beoordeel deze handleiding


Product specificaties

Merk: Vaxcel
Categorie: Niet gecategoriseerd
Model: Lodge WL33041

Heb je hulp nodig?

Als je hulp nodig hebt met Vaxcel Lodge WL33041 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden