Vango Cairngorm 200 Handleiding

Vango Tent Cairngorm 200

Lees hieronder de 📖 handleiding in het Nederlandse voor Vango Cairngorm 200 (6 pagina's) in de categorie Tent. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
The Crestron® Reference Speaker REFERENCE OD4-BRZ-T-EACH made
by Origin Acoustics delivers the pinnacle of performance for demanding
residential installations. Select materials, top shelf components and a
high-end appearance underscore the design behind each speaker. The
result is a no-compromise outdoor speaker designed to be staked
directly into the ground or mounted to an exterior wall, fence post, or
tree.
In the
In the
In the
In the In the Box
Box
Box
BoxBox
1 REFERENCE OD4-BRZ-T-EACH
 
Additional Items
Additional Items
Additional Items
Additional ItemsAdditional Items
1 Ground stake
2 Wire nuts
Installation
Installation
Installation
Installation Installation
Prepare the
Prepare the
Prepare the
Prepare the Prepare the Site
Site
Site
SiteSite
The Crestron Reference speaker REFERENCE OD4-BRZ-T-EACH can be
installed at ground level using the supplied stake. It can also be mounted
to outdoor hard surfaces, such as a trellis, under an eave, on a wall, on a
deck, or to a post using the surface/tree mount SPKA-SMK/TREEMK-
REFERENCE-OD4 (optional).
 For in-ground level installation, choose a location that will not flood land where the speaker will not be affected by an in-ground sprinkler
system.
 For above-ground installation, the speaker is mounted with either the lsurface or tree mounting bracket (not included).
REFERENCE
REFERENCE
REFERENCE
REFERENCEREFERENCE OD4-BRZ-T-EACH
OD4-BRZ-T-EACH
OD4-BRZ-T-EACH
OD4-BRZ-T-EACHOD4-BRZ-T-EACH QuickStart
Reference
Reference
Reference
ReferenceReference 4
4
4
44in.
in.
in.
in.in. 2-Way
2-Way
2-Way
2-Way2-Way Outdoor
Outdoor
Outdoor
OutdoorOutdoor Speaker,
Speaker,
Speaker,
Speaker,Speaker,Bronze
Bronze
Bronze
BronzeBronzeTextured,
Textured,
Textured,
Textured,Textured, Single
Single
Single
SingleSingle
1
1
1
11
Mount the
Mount the
Mount the
Mount the Mount the Speaker
Speaker
Speaker
SpeakerSpeaker
In-Ground Installation
In-Ground Installation
In-Ground Installation
In-Ground InstallationIn-Ground Installation
For in-ground installation:
1. Pull the speaker cable through the top of the stake and out either
side on the bottom opening.
2. Drive the ground stake (included) into the ground.
 For installation in soft soil: The stake can be installed without lexcavating the soil. Push the stake down into the soil.
 For installation in hard soil: Dig a hole for the stake. Place the lstake in the hole with the top cylinder of the stake above ground
level. Hold the stake straight while backfilling and compacting the
soil.
3. Attach the speaker to the stake by turning the speaker clockwise
until it is mounted properly.
2
2
2
22
REFERENCE
REFERENCE
REFERENCE
REFERENCEREFERENCE OD4-BRZ-T-EACH
OD4-BRZ-T-EACH
OD4-BRZ-T-EACH
OD4-BRZ-T-EACHOD4-BRZ-T-EACH QuickStart
Reference
Reference
Reference
ReferenceReference 4
4
4
44 in.
in.
in.
in.in. 2-Way
2-Way
2-Way
2-Way2-Way Outdoor
Outdoor
Outdoor
OutdoorOutdoor Speaker,
Speaker,
Speaker,
Speaker,Speaker, Bronze
Bronze
Bronze
BronzeBronze Textured,
Textured,
Textured,
Textured,Textured, Single
Single
Single
SingleSingle
Above-Ground Installation
Above-Ground Installation
Above-Ground Installation
Above-Ground Installation Above-Ground Installation
Use the SPKA-SMK/TREEMK-REFERENCE-OD4 optional accessory to
install the speakers on a surface or a tree. This accessory must be
purchased separately.
For surface mount installation:
1. Route the speaker cable through all the components of the knuckle
adapter bracket.
2. Install the knuckle adapter bracket (not included) to the speaker as
shown in figure A.
NOTE:
NOTE:
NOTE:
NOTE:NOTE: The knuckle adapter bracket comprises nut 1, mount base,
mount adapter, and nut 2.
a. Turn nut 1clockwise until it is secured to the speaker.
b. Fit the mount base onto the threaded end of the speaker, and
rotate it clockwise until it is secured.
c. Attach the mount adapter to the mount base using the Allen
screw.
d. Tighten nut 2 over the threaded end of the mount adapter.
3. Select a suitable location to mount the surface mount bracket.
4. Install the surface mount bracket as follows:
a. Place the surface mount bracket (not included) in the mounting
location.
b. Hold the surface mount bracket against the surface to mark the
screw holes.
c. Drill holes at the marked screw hole locations and install three
anchors (not included).
d. Route the speaker cable through the center hole and out of the
cable opening on the surface mount bracket.
e. Secure the surface mount bracket to the surface using drywall
screws (not included).
5. Attach the speaker to the surface mount bracket by hand threading
the assembled speaker to the surface mount bracket.
6. For optimal sound coverage, adjust the speaker left or right and up or
down.
a. Adjust the speaker left or right by adjusting the mounting base
threads and nut 2.
b. Adjust the speaker up or down by first loosening the allen screw
on the mount base. Adjust the angle to the desired position, then
retighten the screw.
3
3
3
33
REFERENCE
REFERENCE
REFERENCE
REFERENCEREFERENCE OD4-BRZ-T-EACH
OD4-BRZ-T-EACH
OD4-BRZ-T-EACH
OD4-BRZ-T-EACHOD4-BRZ-T-EACH QuickStart
Reference
Reference
Reference
ReferenceReference 4
4
4
44in.
in.
in.
in.in. 2-Way
2-Way
2-Way
2-Way2-Way Outdoor
Outdoor
Outdoor
OutdoorOutdoor Speaker,
Speaker,
Speaker,
Speaker,Speaker,Bronze
Bronze
Bronze
BronzeBronzeTextured,
Textured,
Textured,
Textured,Textured, Single
Single
Single
SingleSingle


Product specificaties

Merk: Vango
Categorie: Tent
Model: Cairngorm 200

Heb je hulp nodig?

Als je hulp nodig hebt met Vango Cairngorm 200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Tent Vango

Handleiding Tent

Nieuwste handleidingen voor Tent