V7 1TW1500-1N Handleiding

Bekijk gratis de handleiding van V7 1TW1500-1N (2 pagina’s), behorend tot de categorie UPS. Deze gids werd als nuttig beoordeeld door 56 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over V7 1TW1500-1N of wil je andere gebruikers van dit product iets vragen? Stel een vraag

UPS 1500VA TOWER US

Installation & Operation

UPS

Product Overview

Fault Code Table

1. Inspection

The following items are inside the box: UPS Unit, User Manual

•Remove the UPS from its package and inspect it for damage that may have occurred during

shipping. If any damage is discovered, re-pack the unit and return it to the place of purchase.

2. Connect to Utility Power

•Connect AC power cord to utility power. Then, the UPS will start to charge inside battery. For best

result, charge the battery for 6 hours prior to initial use.

3.Plug in Equipment

•Battery back-up Outlets (5)

•Connect computer and monitor to the “Battery Backup” outlets. These outlets provide battery

backup, EMI ltering, line conditioning, and surge protection. Battery power is automatically

provided in case of power failure.

•Surge-Protected Outlets (5)

•Connect a printer, fax machine, or scanner to the “Surge-protected” outlets. These outlets do not

provide power during power failure.

CAUTION: NEVER connect a laser printer or scanner to the battery backup sockets of UPS. The

equipment may draw signicantly power to overload the UPS

4.Turn On/O the UPS

•To turn on the UPS unit, hold the power button until you hear a beep. To turn o the UPS unit,

hold the power button until it beeps. Then, display will shut o.

1.LCD display or LED indicators

(Please check LCD section for

the details)

2.Power Switch

3. Mute Button

4. Up/down button

5. AC Input

6. Circuit Breaker

7. Surge-protected outlets

8.Battery Backup Outlets

9. USB port (option)

10.Modem/phone/network surge

protection (option)

11. Coax surge protection (option)

Fault ConditionSolutionsLCD

Output short circuitedDisconnect short-circuited loads and

restart the UPS again

Inverter/Output failureCall for service immediately

Overcharge

1. Turn o the unit and wait for cooling.

2. Or remove excessive loads and wait

for cooling.

Note: If fault alarm occurs, please call for service immediately.

LED DISPLAYUPS1DT550-1N only

Operation Display

UPS ModeDescriptionLCD

UPS Power ONWhen UPS is powered on, all icons will

light up 1 second

Standby Mode

Site wiring fault in

standby modeLow Battery

AC Mode

When AVR is functioning,

icon will ash

every second.

Press button to switch displayed

information.

1. Output voltage

2. Output frequency

3. Input voltage

4. Input frequency

5. Output power in kW

6. Output power in kVA

7. Estimated backup time

Overload in AC mode

icon will ash

When overload occurs, alarm will beep

every 0.5 second.

Site wiring fault in AC

mode

Battery Mode

In battery mode, press

button to mute

alarm and icon will

be on.

Alarm will beep every 10 seconds and

LCD information will be displayed in the

following order when pressing

button.

1. Estimated backup time

2. Output voltage

3. Output frequency

4. Input voltage

5. Input frequency

6. Output power in kW

7. Output power in kVA

When battery level is low,

icon will ash

Alarm will beep every second. This alarm

can not be mute.

Overload in battery mode

icon will ash

When overload occurs, alarm will beep

every 0.5 second.

NOTE: The backlight will be always on when any fault or warning occurs.

5.Install software (Optional for advanced users)

For optimal computer system protection, install UPS monitoring software to fully congure the UPS

system. Please follow steps below to download and install monitoring software.

1.Go to the website http://www.V7-world.com/downloads

2. Select ViewPower software for your operating system to download the software.

3. Follow the on-screen instructions to install the software.

1

2

3

4

10

56

7 8

11

9

Product specificaties