UPM ET160 Handleiding

UPM Schakelaar ET160

Lees hieronder de 📖 handleiding in het Nederlandse voor UPM ET160 (1 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
2
7 8 9 10 11 12
4 5 63
Dim : (58W x 76 H)mm/page
Model : ET-160 -SE-50S
Scale : 1:1
Version : English
Date : July.04.2001.
Manual number : UMTMA2006
LCD Display
On/Off
Set
Down
Up
LCD Display
Countdown
Random
Reset
OPERATION MANUAL
Programmable Microcomputer TIMER
MODEL NO. ET160
Thank you for buying this Programmable Micro Computer
Timer! By setting programs and random functions, you can
turn on and off any plugged-in electrical applicances at your
own selected time or at random intervals.
Operation of this Timer is simple. To obtain the fullest
utilization, please read and follow the instructions carefully.
Features
Real-time Clock with Weekday, Hour, Minute and Second
display in selectable 12 or 24 hour display format
20 On/Off Program Pairs with Weekday, Hour and Minute
setting which can operate individually either on a specific
day, Monday to Friday, Monday to Saturday, during
Weekend or everyday
Countdown Timer with Hour, Minute and Second setting
Programmable Random Timer
Summer/Winter Time Mode
Manual On/Off
Master/individual disable for pre-set program(s)
Battery Installation
Before operating, the two button cell batteries (included)
should be installed into the Timer. To install the batteries,
unplug the Timer, unscrew the 2 small screws at the back and
remove the battery cover. Then place the batteries into the
compartment while observing the correct polarity. Replace
the cover and screws after battery installation.
Note: The batteries serve to back up the clock and
programs while it is unplugged. The battery life is
around 1 year when the Timer is not connected to
the power outlet. If you plan to leave the Timer
unplugged for a long period of time, you may want to
remove the batteries from the Timer.
Reset Function / Abnormal Display
When an abnormal or blank display appears, or if you want to
clear all programs, use a round object such as a ball-point pen
to push the RESET key. After reset, clock and all programs will
be cleared.
If the display is dim or abnormal, you should replace the
button cell batteries.
Operation
The various modes of the Timer are arranged in a circular
pattern as shown below:
Clock Pgm.1 On Pgm.1 Off Pgm.2 On
Pgm.2 Off ... Pgm.20 On Pgm.20 Off
Countdown Clock...
The PROG symbol will light up to denote Program is being
displayed. The CD PROG symbol will light up to denote that
the Countdown Program is being displayed.
To return to the Clock display from other modes, simply
press both and keys together.
Setting the Clock
To set the clock, press the SET key while clock is
displayed. will appear on the display and SET
weekday will be flashing.
Press or (DOWN or UP) key to select the correct
day.Holding the key and it will repeat by itself.
Press key and will be flashing.SET Hour
Repeat Step (2) and (3) until all data have been set.
For the setting of , either or key will set Second
the second to ‘00’.
After all data have been set, will disappear and the SET
Timer will return to the normal clock display.
To change between 12 and 24 hour display, press the
RND key during clock setting.
Setting the Program
With this Timer you can set up to 20 On/ Off Programs. To
set each program, please see the example shown below:
Example of setting program 1:
MO 8:15 ON / MO 15:45 OFF
In this example, the Timer will be turned on at Monday 8:15
and off at 15:45.
Press or key until appears on the PROG 1 ON
display.
Press key and will appear on the display and SET SET
Weekday will be flashing.
Press or key to select the day(s) for Program 1 to
be active. The day displayed will sequence through
MO-SU MO SU MO - FR MO - SA(everyday), to , then ,
and , and repeat again. In this example, the day SA - SU
would be Monday. Press the SET MO key when appears
on the display.
should be flashing. Use or key to change Hour
the hour to 8, then press the key. SET
Minute should be flashing. Change it to 15.
Press key to finish the setting of Program 1-On. SET
Press key and appears at the display. PROG 1 OFF
Use the same method to set the off time.
To set more programs, press the key and PROG 2 ON
appears. Repeat the above procedures to set all programs.
If no key is pressed for 1 minute, the Timer will return to
Clock display automatically.
Setting the Countdown Timer
The countdown timer can be used to turn the timer on or off
for a period from 1 second up to 23 hours 59 minutes 59
seconds.
Example: Set the Countdown Timer to stay On for 1
hour 10 minutes 0 seconds.
Display by using or key.CD PROG
Press key. SET SET ON will light up and the word will
be flashing
Select on/off using or key. Press SET key
when ON is displayed.
Hour should be flashing.Adjust the hour to 1 and SET.
Minute should be flashing. Set minute to 10 and second
to 0 using the same method.
To activate the Countdown Timer, press the key. To stop CD
the countdown, press the key again and the display will CD
return to its pre-set countdown value.
When the Countdown function is operated in clock mode and
timer program mode, CD will be flashing on the display.
Note: Countdown will not start when Random function is
activated. All pre-set programs are also disabled
during the countdown period. Activating the Manual
on/off function will cancel the countdown operation.
Activating the Random Functions
This timer has a built-in random function to automatically
turn the timer on and off at random intervals. This feature is
especially useful for security purpose whenever a home is
left unattended.
3 different Random functions are available:
(1) Short random Timer
(2) Long Random Timer
(3) Program Random Timer
To activate Short Random, press the RND key when Clock
or Program 1-19 is displayed. will flash. To cancel RND
Random function, press key again. Short random RND
cycle is about 1~2 hour.
To activate Long Random, press the RND key when
Countdown Timer is displayed. L-RND will be flashing. Long
random cycle is about 2~4 hour.
The Random functon can be programmed so that it will
activate only during certain period of time (e.g., only at night
time for the house light). To use Program Random, set
Program 20 to the period that you want the Random function
to be activated.
For example, you can set Program 20-On to Mo-Fr 19:30 and
Program 20-Off to Mo-Fr 23:00. Then random function will only
active on weekday evening.
To activate the Program Random, make sure Program 20 is
displayed, then press the key (Pressing the RND RND key
while Program 20 is not displayed will only activate the regular
Random function).
Once Program Random is started,the symbol will stay on RND
during the inactive period and flash during the active period.
Cycle timer is same as in Short Random.
While random function is actived, all pre-set programs
including Countdown Program will be disabled. Activating
Manual On/Off function will cancel the Random function.
Summer/ Winter Time
Holding both and keys at the same time in the Clock
display will change the current time to Summer time mode.
The hour will advance by one and the symbol “ ” will
light up to denote that the Summer time is activated.
Press the 2 keys again in Clock display will return to normal
time.
Manual On/ Off
The Timer can be turned on or off anytime by using the
ON/OFF ON key without affecting the program. The flashing
or will indicate that Manual On/Off function is activated. OFF
Activating the Disable / Master Disable Function
This function allows you to disable any or all of the pre-set
ON/OFF programs. To disable a particular program, display
the program you wish to disable, then press the key. The SET
display will be flashing and the word will light up. SET
Press the key to disable the program and the ON/OFF X
symbol will appear to indicate that particular program is
disabled.
Note: The display is still flashing and if there is no changes
to be made on the pre-set program time, press the
key until the display is not flashing. Use thisSET
function to disable as many available pre-set
programs as you choose.
Press either the or key to scroll through clock and
programs.If the key is pressed for more than 1 second,the
key will repeat itself.
To disable all 20 programs, press the SET key while in
Clock display, then press the ON/OFF key. The X symbol
appears on the Clock Display Mode indicates that all pre-
set programs are disabled.
To cancel this Disable function, just use the same method to
turn off the symbol.X
Technical Specifications
Program: 20 programs per day or per week
Minimum switching time: 1 minute
Ratings: 120V AC 15A
Maximum load: 1,800W resistive
120 V AC
15 A
Summer-Time
Indicator Hour Minute Second
Off Indicator
On Indicator
Disable Indicator
Day
Random Mode
Set Mode
Clock Mode
Countdown Mode
Program Mode
hp://waterheatermer.org/UPM-mers-and-manuals.html

Product specificaties

Merk: UPM
Categorie: Schakelaar
Model: ET160

Heb je hulp nodig?

Als je hulp nodig hebt met UPM ET160 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schakelaar UPM

UPM

UPM ET150 Handleiding

3 Juni 2023
UPM

UPM ET420C Handleiding

28 Mei 2023
UPM

UPM ETW350 Handleiding

10 Mei 2023
UPM

UPM MT560 Handleiding

8 Mei 2023
UPM

UPM ETW193 Handleiding

7 Mei 2023
UPM

UPM RT601 Handleiding

6 Mei 2023
UPM

UPM ET160 Handleiding

23 April 2023
UPM

UPM DT420 Handleiding

22 April 2023
UPM

UPM ETW353 Handleiding

13 April 2023
UPM

UPM ETW190 Handleiding

27 Februari 2023

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar

IPGARD

IPGARD SUHN-4D-P Handleiding

16 April 2024
IPGARD

IPGARD SUHN-4S-P Handleiding

16 April 2024
IPGARD

IPGARD SDPN-8S-P Handleiding

16 April 2024
IPGARD

IPGARD SDVN-82-X Handleiding

16 April 2024
IPGARD

IPGARD SUHN-2S-P Handleiding

16 April 2024
IPGARD

IPGARD SDMN-4S-P Handleiding

16 April 2024
IPGARD

IPGARD SUHN-4S Handleiding

16 April 2024
IPGARD

IPGARD SDVN-42-X Handleiding

16 April 2024
Comet

Comet 3550.01.12 Handleiding

13 April 2024
StarTech.com

StarTech.com IES1G52UP12V Handleiding

10 April 2024