UPM ETW193 Handleiding

Bekijk gratis de handleiding van UPM ETW193 (3 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 87 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over UPM ETW193 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ETW193 electronic programmable timer

OWNER’S

MANUAL

Congratulations on your

purchase of a UPM timer.

Please take the time to

read and understand this

manual so you can begin

to enjoy the security and

energy saving benefits this

product has to offer.

FEATURES

!

!

!

!

!

!

20 ON programs /

20 OFF programs

3 random functions

12/24 hour clock

500W loading

single pole or three-way

Countdown timer -

“One-Touch Countdown”

SINGLE POLE INSTALLATION

1

2

Remove existing switch and identify the wires in the wall box.

Using the supplied wire nuts, securely fasten the wires on the timer

to the wires in the wall box according to diagram FIGURE 1.

3

Disconnect the power supply at the circuit breaker or fuse before

proceeding with the installation.

Connect one of the(hot) wire on the timer to the

wire in the wall box.

black hot

Connect the other(hot) wire on the timer to thewire

in the wall box coming from the light fixture.

black hot

GETTING STARTEDsetting the clock

1

4

2

1

5

6

7

8

Press SET

Day select with

Press SET

Hour select with

Press SET

Minute select with

3

5 79

2

4

6

8

10

9

10

3

Press SET

Second select with

Press SET

Press SET

Minute select with

memory backup

This UPM wall switch timer comes with built-in memory backup protection.In the

event of a power outage, all program and clock settings will remain in memory.

CLOCK ON

MO

CLOCK ON

MO

To activate/deactivate Daylight Saving Time (DST) function, press and hold

bothandtogether for 3 seconds inmode; solidfor DST

CLOCK

To toggle between 12/24 hour format, press RND during clock setting

CAUTION!

*

This timer is only compatible with incandescent (120V) lighting

applications.The timer mustbe used with magnetic

transformers, motors or loads exceeding 500W.

NOT

All wiring must comply with applicable codes and regulations.

TO AVOID FIRE, SHOCK, OR DEATH; SHUT OFF POWER SUPPLY AT

THE CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS

OFF BEFORE WIRING.

Handle installation with caution to prevent any risk of electrical shock

that could cause serious injury or death.If you are not sure about any

part of the given instructions, consult a qualified electrician.

For proper grounding, connect the(ground) wire on

the timer to the ground “screw” found inside the wall box.

green

Mount timer into the wall box carefully.

Restore power supply at the circuit breaker or fuse.

4

5

Terminate the(three-way) wire on the timer with a wire nut.

(For a single pole installation, the red wire is not needed).

red

INSTALLING THE TIMER IN PLACE OF LOAD SWITCH

FIGURE 3

THREE-WAY INSTALLATION DIAGRAM

JUMPER WIRE

COMMON TERMINAL

HOT WIRE

HOT WIRE

CLOSE UP VIEW OF THE HOT SWITCH

Go tousing

CLOCK

GETTING STARTEDbutton placements

display

1

2

CD - activates countdown timer

3

4

SET - activates set functions

RND - activates random functions

5

- scrolls through selections

6

ON/OFF - manual on/off control

7

Main On/Main Off

R - reset

1

4

2

5

6

7

3

CLOCK CDSETRNDL

-PROG ONOFF

MO TU WETHFRSASU

X

Set function indicator

Weekday indicators

Random function indicator

AM/PM

Clock function

indicator

Disabled program

icon

ON/OFF indicator

8

8

One-Touch Countdown Button

One-Touch

Countdown

Countdown function indicator

Power Source

Red

ETW193

JUMPER 3 Way

Black

Black LOAD

COMMON Green

HOT SWITCH

PAGE 1PAGE 2PAGE 3

PAGE 10PAGE 11PAGE 12

hp://waterheatermer.org/UPM-mers -and-manuals.html

Product specificaties