Uline H-3070 Handleiding

Bekijk gratis de handleiding van Uline H-3070 (15 pagina’s), behorend tot de categorie Nietmachine. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 8 reviews. Heb je een vraag over Uline H-3070 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 15 0424 IH-3070

KIHLBERG PNEUMATIC

BOTTOM STAPLER

1-800-295-5510

uline.com

H-3070

Para en Español, vea páginas 6-10.

Pour le français, consulter les pages 11-15.

SAFETY

• Never use oxygen, combustible gases, CO, steam 2

or high pressure gas tanks as power sources for

the tool. The tool could explode and cause serious

injury.

• Use only dry, clean, pressure-regulated

compressed air to drive the tool.

• Connect the tool to the compressed air system

before the fastener unit is loaded.

• The maximum permitted air pressure for the tool is

116 psi.

• The maximum supply pressure is 127 psi.

• Avoid excessive pressure drop by ensuring that the

minimum internal diameter of the air hose is 3/8"

and that of the nipple is a minimum of 6/32".

• The stapler and its hose are equipped with a

connection nipple that automatically exhausts air

from the tool after it has been disconnected.

• Adjust the air pressure to the lowest level that will

bend the staples correctly. Start at approximately

5.0 bar and raise this by 0.5 bar increments until

the correct pressure is found. Never exceed 8 bar.

• Low air pressure will result in low maintenance costs.

• When working with small cartons, there is a risk of

injury to fingers holding the item.

• Never hold your hand under or close to the stapling

head.

• Keep hands clear of arms carrying the stapling

head when operating the foot valve.

Product specificaties