Uline H-1993 Handleiding
Pagina's 9 Nietmachine
Bekijk de handleiding van Uline H-1993 gratis online of download de PDF. Deze handleiding is 13 keer bekeken. Vraag over dit model? Stel een vraag
PAGE 1 OF 90923 IH-1993
H-1993
KIHLBERG MANUAL
CARTON STAPLER
1-800-295-5510
uline.com
INSTRUCTIONS
ADJUSTING THE STAPLE LEG LENGTH
The stapler is adjustable for 5/8"-3/4" staples. The stapler
setting for a different staple leg length is altered as
follows. Start by adjusting the depth of stapling for deep
clinching (=). (See Figure 2)
1. With the allen wrench,
unscrew locking screw (A)
two turns. (See Figure 1)
2. With a screwdriver, adjust
screw (B) to 5/8" or 3/4" leg
length. (See Figure 1)
3. Tighten the locking
screw (A). (See Figure 1)
ADJUSTING THE PENETRATION DEPTH
The depth of stapling is easily
adjusted by using the setting
knob (1). Press the knob in and
turn it to the desired position.
(See Figure 2)
• Use "–" for shallow stapling
penetration.
• Use "=" for deep stapling
penetration.
ADJUSTING STAPLE CLINCH
It is possible to adjust how tightly the staples are closing:
1. With the Allen wrench,
turn the adjusting screw
clockwise for a stronger
clinch. (See Figure 3)
2. Turn the adjusting screw
counterclockwise to open
the clinch more.
CONTROLLING THE CLINCH
(See Figure 4)
a. Good clinch.
a. Leg length of the
staple too long or
bent too much.
b. Leg length of staple
too short or not bent
enough.
If necessary, adjust
staple clinch.
Adjusting
Screw
Figure 3
C
B
A
Figure 4
3/4"5/8"
B
A
Figure 1
1
Figure 2
TOOL NEEDEDCOMPATIBLE STAPLES
Allen Wrench
(Included)
S-10721
C34
1⁄ x 3/4"
S-10720
C58
1⁄ x 5/8"
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
Product specificaties
| Merk: | Uline |
| Categorie: | Nietmachine |
| Model: | H-1993 |
Heb je hulp nodig?
Als je hulp nodig hebt met Uline H-1993 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden