Uline H-3071 Handleiding

Bekijk gratis de handleiding van Uline H-3071 (29 pagina’s), behorend tot de categorie Nietmachine. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 2 reviews. Heb je een vraag over Uline H-3071 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 29 0421 IH-3071

H-3071

NAIL GUN

1-800-295-5510

uline.com

INSTRUCTIONS

SAFETY INSTRUCTIONS

WARNING! EYE PROTECTION which conforms to

ANSI specifications and provides protection

against flying particles both from the FRONT

and SIDE should ALWAYS be worn by the

operator and others in the work area when

connecting to air supply, loading, operating

or servicing this tool. Eye protection is required

to guard against flying fasteners and debris

which could cause severe eye injury.

The employer and/or user must ensure that

proper eye protection is worn. Eye protection

equipment must conform to the requirements

of the American National Standards Institute,

ANSI Z87.1, and provide both frontal and side

protection.

NOTE: Non-side shielded spectacles and

face shields alone do not provide adequate

protection.

CAUTION: Additional safety protection will be

required in some environments. For example,

the working area may include exposure to

noise level which can lead to hearing damage.

The employer and user must ensure that any

necessary hearing protection is provided and

used by the operator and others in the work

area. Some environments will require the use

of head protection equipment. When required,

the employer and user must ensure that head

protection conforming to ANSI Z89.1 is used.

AIR SUPPLY AND CONNECTIONS

WARNING! Do not use oxygen, combustible

gases or bottled gases as a power source for

this tool, as tool may explode, possibly causing

injury.

WARNING! Do not use supply sources which

can potentially exceed 200 psig as tool may

burst, possibly causing injury.

WARNING! The connector on the tool must not

hold pressure when air supply is disconnected.

If a wrong fitting is used, the tool can remain

charged with air after disconnecting and thus

will be able to drive a fastener even after the

air line is disconnected, possibly causing injury.

WARNING! Do not pull trigger or depress

contact arm while connected to the air supply

as the tool may cycle, possibly causing injury.

WARNING! Always disconnect air supply:

1) Before making adjustments; 2) When

servicing the tool; 3) When clearing a jam;

4) When tool is not in use; 5) When moving to

a different work area, as accidental actuation

may occur, possibly causing injury.

LOADING TOOL

WARNING! When loading tool: 1) Never place a

hand or any part of body in fastener discharge

area of tool; 2) Never point tool at anyone;

3) Do not pull the trigger or depress the trip

as accidental actuation may occur, possibly

causing injury.

BOSTITCH

Para Español, vea páginas 10-20.

Pour le français, consulter les pages 21-29.

Product specificaties