Uline H-1078 Handleiding

Bekijk gratis de handleiding van Uline H-1078 (3 pagina’s), behorend tot de categorie Lijmpistool. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.7 sterren uit 9 reviews. Heb je een vraag over Uline H-1078 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 3 0424 IH-1078

π H-1078

LIGHT DUTY

GLUE GUN

1-800-295-5510

uline.com

OPERATION

SAFETY

1. Plug in gun to a 110 volt outlet.

2. Insert glue stick into back of gun.

3. Pull trigger several times until glue is set firmly into

the inlet tube.

4. Allow five minutes of warm-up time for the gun and

glue stick.

5. Apply appropriate amount of glue by squeezing

trigger.

6. Bond surfaces by pressing together within 15

seconds of applying hot glue. For best results,

ensure surfaces are clean of any oil and dirt.

7. Always use the provided glue gun stand in between

uses when gun is plugged in.

CAUTION! Never lay the glue gun on its side

while gun is still hot.

8. After use, always unplug gun and use provided glue

gun stand until gun has cooled before storing.

9. Never pull glue sticks out of the glue gun.

CAUTION! Keep out of reach of children.

WARNING! Never touch the nozzle of the gun

or hot melted glue as operating temperatures

can reach 400ºF and can cause severe burns.

• Do not use within 10' of any flammable materials.

• Not for use outdoors or in areas that may be wet or

damp.

• Keep all work areas clean and well-lit.

• Never use this gun with materials other than

recommended glue sticks.

• Always wear protective safety equipment such as

gloves, glasses, long sleeve shirts and pants when

using hot melt glue guns.

• When inserting glue sticks into a hot glue gun,

avoid using too much force as this can cause hot

glue to be unexpectedly discharged from nozzle or

flow back from inlet tube.

• Do not store in direct sunlight.

• Not for use with extension cords.

• Hot melt glue is not intended to replace structural

fasteners or in temperatures reaching over 130ºF.

Para Español, vea página 2.

Pour le français, consulter la page 3.

Product specificaties