Uline H-9304 Handleiding

Bekijk gratis de handleiding van Uline H-9304 (6 pagina’s), behorend tot de categorie Lijmpistool. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over Uline H-9304 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 6 0121 IH-9304

π H-9304

INDUSTRIAL

GLUE GUN

1-800-295-5510

uline.com

OPERATION

1. Fasten output control adjuster.

2. Plug in to a 110 volt outlet.

3. Turn ON/OFF switch on. Red light means power is on.

4. Insert glue stick into back of gun.

5. Allow 3-5 minutes to warm up gun and glue stick.

6. Pull trigger several times until glue is set firmly into

the inlet tube.

7. Apply appropriate amount of glue by squeezing

trigger.

8. The output volume of glue can be adjusted by

turning the output control adjuster. Turn clockwise for

less glue and counterclockwise for more.

9. Bond surfaces by pressing together within 15-20

seconds after applying hot glue. For best results,

surfaces should be clean of any oil and dirt.

10. Always use the provided wire support stand between

uses when gun is plugged in.

11. Never lay gun on its side while it is still hot.

12. After use, always switch gun to off, unplug gun and

use provided wire support until gun has cooled

before storing.

13. Never pull glue sticks out of gun.

14. If glue drips excessively, replace the nozzle. To

change, heat the gun for a minute until glue is

softened enough to remove the nozzle. While

wearing gloves, use a wrench to remove the old

nozzle. Flush glue through the gun and attach the

new nozzle.

Output Control

Adjuster

ON/OFF Switch

Nozzle

Wire

Support Stand

Trigger

Para Español, vea páginas 3-4.

Pour le français, consulter les pages 5-6.

Product specificaties