Texas Instruments LMC6482IM/NOPB Handleiding

Texas Instruments Niet gecategoriseerd LMC6482IM/NOPB

Bekijk gratis de handleiding van Texas Instruments LMC6482IM/NOPB (42 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 66 mensen en kreeg gemiddeld 4.6 sterren uit 33.5 reviews. Heb je een vraag over Texas Instruments LMC6482IM/NOPB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/42

C001

A1 0.18 V ±

500mV 50 s 

C002

A2 0.18 V ±

500mV 50 s 

Product

Folder

Order

Now

Technical

Documents

Tools &

Software

Support &

Community

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

LMC6482

SNOS674G – NOVEMBER 1997 – REVISED APRIL 2020

LMC6482 CMOS Dual Rail-to-Rail Input and Output Operational Amplier

1 Features

1• Specications are typical unless otherwise noted

• Rail-to-rail input common-mode voltage range

(specied over temperature)

• Rail-to-rail output swing (within 20-mV of supply

rail, 100-k load)Ω

• Specied 3-V, 5-V, and 15-V performance

• Excellent CMRR and PSRR: 82 dB

• Ultra-low input current: 20 fA

• High voltage gain (RL = 500 k ): 130 dBΩ

• Specied for 2-k and 600- loadsΩ Ω

• Power-good output

• Packages: PDIP, SOIC, and VSSOP

2 Applications

•Data acquisition (DAQ)

•Currency counter

•Oscilloscope (DSO)

•Intra-DC interconnect (METRO)

•Macro remote radio unit (RRU)

•Multiparameter patient monitor

•Merchant telecom rectiers

•Train control and management

•Process analytics (pH, gas, concentration, force,

and humidity)

•Three phase UPS

• Improved replacement for TLC272, TLC277

3 Description

The LMC6482 device provides a common-mode

range that extends to both supply rails. This rail-to-rail

performance combined with excellent accuracy, due

to a high CMRR, makes this device unique among

rail-to-rail input ampliers. The device is an excellent

choice for systems, such as data acquisition, that

require a large input signal range. The LMC6482 is

also an excellent upgrade for circuits using limited

common-mode range ampliers, such as the TLC272

and TLC277.

Maximum dynamic signal range is provided in low

voltage and single supply systems by the rail-to-rail

output swing of the LMC6482. The rail-to-rail output

swing is maintained for loads down to 600 of theΩ

device. Specied low-voltage characteristics and low-

power dissipation make the LMC6482 a great choice

for battery-operated systems.

The LMC6482 is available in 8-pin PDIP and SOIC

packages. The device is also available in a VSSOP

package, almost half the size of a SOIC-8 device.

See the for a quad CMOS operationalLMC6484

amplier with these same features.

Device Information(1)

PART NUMBER PACKAGE BODY SIZE (NOM)

LMC6482

SOIC (8) 4.90 mm × 3.91 mm

VSSOP (8) 3.00 mm × 3.00 mm

PDIP (8) 9.81 mm × 6.35 mm

(1) For all available packages, see the package option addendum

at the end of the data sheet.

Rail-to-Rail Input Rail-to-Rail Output

LMC6482

SNOS674G – NOVEMBER 1997 – REVISED APRIL 2020

www.ti.com

Product Folder Links: LMC6482

Table of Contents

1 Features .................................................................. 1

2 Applications ........................................................... 1

3 Description ............................................................. 1

4 Revision History..................................................... 2

5 Pin Conguration and Functions ......................... 3

6 Specications......................................................... 3

6.1 Absolute Maximum Ratings ...................................... 3

6.2 ESD Ratings.............................................................. 4

6.3 Recommended Operating Conditions....................... 4

6.4 Thermal Information.................................................. 4

6.5 Electrical Characteristics for V+= 5 V....................... 4

6.6 Electrical Characteristics for V+= 3 V....................... 7

6.7 Typical Characteristics.............................................. 9

7 Detailed Description ............................................ 18

7.1 Overview ................................................................. 18

7.2 Functional Block Diagram ....................................... 18

7.3 Feature Description................................................. 18

7.4 Device Functional Modes........................................ 19

8 Application and Implementation ........................ 20

8.1 Application Information............................................ 20

8.2 Typical Applications ............................................... 22

9 Power Supply Recommendations...................... 28

10 Layout................................................................... 28

10.1 Layout Guidelines ................................................. 28

10.2 Layout Example .................................................... 28

11 Device and Documentation Support ................. 30

11.1 Receiving Notication of Documentation Updates 30

11.2 Support Resources ............................................... 30

11.3 Trademarks ........................................................... 30

11.4 Electrostatic Discharge Caution............................ 30

11.5 Glossary ................................................................ 30

12 Mechanical, Packaging, and Orderable

Information ........................................................... 30

4 Revision History

NOTE: Page numbers for previous revisions may dier from page numbers in the current version.

Changes from Revision F (April 2020) to Revision G Page

• Deleted old note 4 from Electrical Characteristics for V+= 5 V table. ................................................................................... 4

Changes from Revision E (April 2015) to Revision F Page

• Changed junction temperature max value from –85°C to 85°C (typo) in table..........Recommended Operating Conditions 4

Changes from Revision D (March 2013) to Revision E Page

• Added section, table, section,Pin Conguration and Functions ESD Ratings Feature Description Device Functional

Modes Application and Implementation Power Supply Recommendations Layout Device, section, section, section,

and Documentation Support Mechanical, Packaging, and Orderable Informationsection, and section .............................. 1

Changes from Revision C (March 2013) to Revision D Page

• Changed layout of National Semiconductor Data Sheet to TI format .................................................................................. 27

LMC6482

www.ti.com

SNOS674G – NOVEMBER 1997 – REVISED APRIL 2020

Product Folder Links: LMC6482

5 Pin Conguration and Functions

D, DGK, and P Packages

8-Pin SOIC, VSSOP, and PDIP

Top View

Pin Functions

PIN TYPE DESCRIPTION

NO. NAME

1 OUTPUT A O Output for Amplier A

2 INVERTING INPUT A I Inverting input for Amplier A

3 NONINVERTING INPUT A I Noninverting input for Amplier A

4 V–P Negative supply voltage input

5 NONINVERTING INPUT B I Noninverting input for Amplier B

6 INVERTING INPUT B I Inverting input for Amplier B

7 OUTPUT B O Output for Amplier B

8 V+P Positive supply voltage input

(1) Stresses beyond those listed under may cause permanent damage to the device. These are stress ratingsAbsolute Maximum Ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended

Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may aect device reliability.

(2) If Military/Aerospace specied devices are required, please contact the TI Sales Oce/Distributors for availability and specications.

(3) Limiting input pin current is only necessary for input voltages that exceed absolute maximum input voltage ratings.

(4) Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in

exceeding the maximum allowed junction temperature of 150°C. Output currents in excess of ±30 mA over long term may adversely

aect reliability.

(5) Do not short circuit output to V

+, when V+is greater than 13 V or reliability will be adversely aected.

(6) The maximum power dissipation is a function of T

J(max), RθJA , and T

A. The maximum allowable power dissipation at any ambient

temperature is PD= (TJ(max) −TA)/θJA. All numbers apply for packages soldered directly into a PC board.

6 Specications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1) (2)

MIN MAX UNIT

Dierential input voltage ±Supply Voltage

Voltage at input/output pin (V

−) – 0.3 (V+) + 0.3 V

Supply voltage (V+−V−) 16 V

Current at input pin (3) −5 5 mA

Current at output pin(4) (5) –30 30 mA

Current at power supply pin 40 mA

Lead temperature (soldering, 10 sec.) 260 °C

Junction temperature (6) 150 °C

Tstg Storage temperature –65 150 °C

Product specificaties

Merk:	Texas Instruments
Categorie:	Niet gecategoriseerd
Model:	LMC6482IM/NOPB
Breedte:	5 mm
Diepte:	3.98 mm
Hoogte:	1.5 mm
Breedte verpakking:	8 mm
Diepte verpakking:	495 mm
Hoogte verpakking:	4.064 mm
Soort:	Operationele versterker
Type verpakking:	SOIC
Aantal per verpakking:	95 stuk(s)
Temperatuur bij opslag:	-65 - 150 °C
Aantal kanalen:	2 kanalen
Totale harmonische vervorming (THD):	0.01 procent
Bandbreedte:	1.5 MHz
Bedrijfstemperatuur (T-T):	-40 - 85 °C
Aantal pinnen:	8
Breedte (met pennen):	5 mm
Diepte (met pennen):	6.19 mm
Hoogte (met pennen):	1.75 mm
PSRR-verhouding (Power Supply Rejection Ratio):	82 dB