Sussex RWBHS200RH Handleiding
Lees hieronder de đ handleiding in het Nederlandse voor Sussex RWBHS200RH (1 pagina's) in de categorie Kraan. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.
Pipe Connections
1/2" BSP
HOT
IN
OUTLET
1/2" BSP
COLD
IN
1A
NOGGING
WALL
STUD
28-32
Wall Covering
25mm
"ROUGH-IN" View from above
90
OUTLET
IN-WALL BODY
MASTERFIT
THIS
SIDE
UP AS/NZS 3718:2005
LIC. 20081
1
LOCKING
SLEEVE
HANDLE
DRESS
RING
5.5
Licence No. 0124
In ac cord anc e with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterr ating.g ov.au
The mo re
stars the mo re
water efîcient
Product code
Circa
Wall basin hostess system
Fitting off
Pipe connections
Rough in plumbing (MASTERFIT) mounting guide
- The Masterfit will be supplied with the Spindles pre-installed.
- Prepare a nogging and secure 28-32mm back from the front Using the screws (x4) of the stud (See Fig.1)
- The Masterfit (in-wall) will be marked âThis side Upâ to Ensure the Masterfit is indicate orientation.
- Using the screws (x4) provided, mount the Masterfit (in-wall) to the Nogging.
- Ensure the Masterfit is level and square to the Wall Studs.
- Seal the wall around the Locking Sleeve and immediately fit the Dress Ring.
- Fit the Handle Body, the Handle Body must be fully engaged onto the Spindle; note the Set Screw contact point.
(See Fig.1B)
- Secure the Handle body by tightening the Set screw using the 2mm Allen key provided. (Tighten well)
- After completing the installation, establish water supply, check function of Tapware and ensure no water leaks.
- The Masterfit is supplied with coloured thread Caps to protect and identify the Hot and Cold inlet connections.
- All lines must be free from any dirt and debris before connecting to the Masterfit. Flush all water feed lines.
- Connect Hot and Cold lines to the corresponding 1/2â BSP ports of the Masterfit. (See Fig.1A)
- Do not remove or disturb any factory fitted Pressure Plugs or Fixings.
- Once all water connections are made, use the âSpindle Handle Adapterâ and check Hot/Cold water operation.
- Check all fittings and connections for leaks.
- Store the Dress Kit in a safe place until required for Fit off.
RWBHS150RH Wall basin hostess syst 150mm
RWBHS200RH Wall basin hostess syst 200mm
RWBHS250RH Wall basin hostess syst 250mm
RWBHS150RH-V Wall basin hostess syst 150mm - Vertex
RWBHS200RH-V Wall basin hostess syst 200mm - Vertex
RWBHS250RH-V Wall basin hostess syst 250mm - Vertex
sussextaps.com.au
Product specificaties
| Merk: | Sussex |
| Categorie: | Kraan |
| Model: | RWBHS200RH |
Heb je hulp nodig?
Als je hulp nodig hebt met Sussex RWBHS200RH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kraan Sussex
13 Maart 2024
12 Maart 2024
12 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
Handleiding Kraan
- Kraan IKEA
- Kraan Etna
- Kraan Inventum
- Kraan Brita
- Kraan Delta
- Kraan Ernesto
- Kraan Franke
- Kraan Grohe
- Kraan Hansgrohe
- Kraan Hotto
- Kraan KitchenAid
- Kraan Livarno
- Kraan Lynx
- Kraan Miomare
- Kraan Quooker
- Kraan Smeg
- Kraan Stiebel Eltron
- Kraan Teka
- Kraan Blanco
- Kraan Caple
- Kraan CDA
- Kraan Curaqua
- Kraan SchĂŒtte
- Kraan Lamona
- Kraan Nodor
- Kraan Empire
- Kraan Brauer
- Kraan Elkay
- Kraan Oras
- Kraan Berg
- Kraan Mizzo
- Kraan ZLine
- Kraan Mueller
- Kraan Aloni
- Kraan WillieJan
- Kraan Everpure
- Kraan Sani-Lav
- Kraan Fala
- Kraan Neo
- Kraan Lomazoo
- Kraan American Standard
- Kraan Livarno Lux
- Kraan Billi
- Kraan SaniSupreme
- Kraan Deante
- Kraan Omnires
- Kraan Vola
- Kraan Zip
- Kraan The Galley
- Kraan Viidako
- Kraan Waltec
- Kraan Fantini
- Kraan Oliveri
- Kraan Rogerseller
- Kraan Axor
Nieuwste handleidingen voor Kraan
25 April 2024
25 April 2024
9 April 2024
3 April 2024
3 April 2024
22 Maart 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024
20 Maart 2024