StarTech.com P2CDD143-KVM-SWITCH Handleiding

Bekijk gratis de handleiding van StarTech.com P2CDD143-KVM-SWITCH (14 pagina’s), behorend tot de categorie Schakelaar. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over StarTech.com P2CDD143-KVM-SWITCH of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Hotkey Command Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Hotkey Command Revision: October 10, 2023

2-Port Dual Monitor KVM Switch - DisplayPort - 8K 60Hz - USB-C 10Gbps

Product IDs

P2CDD143-KVM-SWITCH

Product Information

For the latest software, manuals, product information, technical specications, and

declarations of conformance, please visit:

www.StarTech.com/P2CDD143-KVM-SWITCH

Hotkey Commands

Hotkey commands are keystroke sequences that initiate computer/device functions.

Hotkey commands can be used to initiate KVM Switch functions. A hotkey command

sequence must be initiated by the HK_LCode, followed by 1-2 additional keystrokes.

Successful hotkey command inputs result in one or two high-pitch beeps. Unsuccessful

hotkey command inputs result in two low-pitched beeps.

Notes:

- All keystroke combinations must be entered in rapid succession.

- Press and release the indicated keys, unless otherwise specied.

HK_LCode

Option 1.1 (Default - Left Side of the Keyboard)

• Left-side + left-side Ctrl Ctrl

Option 1.2 (Right side of the Keyboard)

To enable HK_LCode for the right-side of the keyboard:

• HK_LCode AltCtrlAlt+ hold left-side + press right-side + release

To use HK_LCode Option 1.2:

• Right-side + right-side Ctrl Ctrl

To revert back to Option 1.1 (Default):

• HK_LCodeAlt CtrlAlt + hold right-side + press left-side + release

Option 2

• Hold left-side + + + release ShiftNum LockNum LockShift

Option 3

• Scroll LockScroll Lock +

Hotkey CommandFunction

HK_LCode1 ~ 2 + • Select PC 1 or PC 2

HK_LCodeF1 + • Start Auto Scan

HK_LCodeF2 +

+ or Up Arrow Down

Arrow

• Start Manual Scan -- Manually switch back and forth

between PCs

• Press the or key to select the Up Arrow Down Arrow

next/previous PC

HK_LCodeF3 +

• Adjust Scan Rate -- KVM Switch generates one to four

beeps that indicate the duration of the scan time:

• One beep = 3 seconds

• Two beeps = 8 seconds

• Three beeps = 15 seconds

• Four beeps = 30 seconds

HK_LCode + F5

• Enable/Disable the binding of PC and Audio Switching.

• Bound by default forcing PC and Audio to switch

together

• Unbound = PC Audio stops following the selected

PC when switching (2 high pitched beeps)

• Bound = PC Audio matches the selected PC (1 high

pitched beep)

HK_LCode + A• Force Audio to be bound to the selected PC

Product specificaties