StarTech.com P4DD46A2-KVM-SWITCH Handleiding

Bekijk gratis de handleiding van StarTech.com P4DD46A2-KVM-SWITCH (1 pagina’s), behorend tot de categorie Schakelaar. Deze gids werd als nuttig beoordeeld door 56 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over StarTech.com P4DD46A2-KVM-SWITCH of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Hotkey Command Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Hotkey Command Revision: May 11, 2023

Dual Monitor KVM Switch - DisplayPort - 4K 60Hz

Product IDs

P2DD46A2-KVM-SWITCH

P4DD46A2-KVM-SWITCH

Product Information

For the latest software, manuals, product information, technical specications, and

declarations of conformance, please visit:

www.StarTech.com/P2DD46A2-KVM-SWITCH

www.StarTech.com/P4DD46A2-KVM-SWITCH

Hotkey Commands

Hotkey commands are keystroke sequences that initiate computer/device functions

and can be used to initiate KVM Switch functions. A hotkey command sequence must

be initiated by the HK_LCode (HotKey Leading Code), followed by 1-2 additional

keystrokes. Successful hotkey command inputs result in a high-pitch beep. Unsuccessful

hotkey command inputs result in a low-pitched beep.

Notes:

- All keystroke combinations must be entered in rapid succession.

- Press and release the indicated keys, unless otherwise specied.

HK_LCode

Option 1.1

• Scr Lck Scr Lck +

Option 1.2

To change the HK_LCode:

• HK_LCode + H + Esc, Caps, or F12

• Alternatively, press and hold the front for , until 2 beeps Host Selection ButtonPC2

are emitted, then press the desired leading hotkey of Scr Lck, ESC, Caps, or F12

Hotkey CommandFunction

HK_LCode1 ~ 2 +

or

HK_LCodeF1 ~ F2 +

• Select PC 1 or PC 2.

HK_LCode + W

• Disable the binding between PC (USB/Video) and Audio

when switching between PC 1 or PC 2.

• Allows switching of PC Ports USB and Video functions,

while Audio does not switch

HK_LCode + Q

• Enable the binding of PC (USB/Video) and Audio

switching.

• Audio will switch with the PC Ports USB and Video

functions.

• Enabled by default.

HK_LCodeF5 ~ F6 +

• Audio Unbound: Selects only the audio and mic source

between PC 1 or PC 2, does not switch USB and Video

• Audio Bound: Select PC 1 or PC 2 and their respective

USB/Video/Audio Ports

HK_LCode + Up Arrow

Key

or

HK_LCode + Down

Arrow Key

• Select the next/previous PC Port.

• If Audio is unbound, the audio will not switch

HK_LCode + B

• Disable the Beep that indicates HotKey Command

Inputs.

HK_LCode + S

• Enable Autoscan.

• Press any key to stop the Autoscan function.

HK_LCode + H + “x”

• Dene the Autoscan time delay.

• “x” = 1 - 10sec, 2 - 20sec, 3 - 30sec, 4 - 40sec, 5

- 50sec, 6 - 60sec, 7 - 70sec, 8 - 80sec, 9 - 90sec, 0 -

100sec

Product specificaties