Kramer EXT3-H-POE-T Handleiding
Kramer
AV extender
EXT3-H-POE-T
Bekijk gratis de handleiding van Kramer EXT3-H-POE-T (4 pagina’s), behorend tot de categorie AV extender. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Kramer EXT3-H-POE-T of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
EXT3-H- - -H- -POE T / EXT3 POE R Quick
Start Guide
Quick Start
P/N:
2900- 301829QS
Rev:
1
Scan for full manual
EXT3-H- - -H-POE-R POE T / EXT3 Quick Start
Guide
This guide helps you install and use your EXT3-H-POE-T -H- -R/ EXT3 POE for the first time.
Go to http://www.kramerav.com/downloads/EXT3-H-POE-T /
http://www.kramerav.com/downloads/EXT3-
H- -T POE to download the latest user manual and check if firmware upgrades are available.
Step 1: Check what’s in the box
EXT3-H- -T POE Transmitter/ EXT3-H- -R POE
Receiver
1 Bracket set
1 Quick start guide
1 Power adapter and cord
4 Rubber feet
Step 2: EXT3-H- -T Get to know your POE
# Feature Function
1 IN LED Lights blue when an active source device input signal is detected.
2 OUT LED Lights blue when an active, far- end sink (acceptor) connection is detected via the
HDBT link.
3 LINK LED Lights green when an HDBT link is established with the HDBaseT receiver.
4 PoE► LED Lights green when the device provides PoE to a connected HDBT receiver.
5 ON LED Lights green when the device receives power.
6 HDBT OUT PoE◄► RJ- 45 Connector Connect to an HDBT receiver (for example, EXT3-H- - POE R). The port can provide or
receive PoE.
7
HDMI IN Connector Connect to an HDMI source.
8 - RS 232 (G, Rx, Tx) 3- pin Terminal
Block Connector
This port has two functions selectable by the SETUP DIP- switches:
1. To send/receive RS- 232 data over the HDBaseT link.
2. For FW Upgrade.
9 IR 3.5mm Mini Jack Connector
Connect to an external infrared emitter / sensor.
The IR signal is passed over the HDBaseT link.
10 SETUP DIP- Set switches the operation DIP- switches. Refer to DIP-Switch Settings on page 3.
11 48V DC 48V DC connector for powering the unit (when not powered by PoE from the receiver).
EXT3-H-REXT3-H-R
EXT3-H-POE-T
ON
LINK
OUT
IN
PoE
Tx
G
Rx
RS
-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS
-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS
-232
12V DC
IR SETUP
HDMI OUTHDBT IN
1
2
O
N
Step 3: EXT3-H- -R Get to know your POE
# Feature Function
1 IN LED
Lights blue when an active, far- end source device input signal is detected via the
HDBT link.
2 OUT LED Lights blue when an active sink (acceptor) connection is detected.
3 LINK LED Lights green when an HDBT link is established with the HDBaseT transmitter.
4
PoE ► LED
Lights green when the device provides PoE to a connected HDBT transmitter.
5 ON LED Lights green when the device receives power.
6 HDBT IN PoE◄► RJ- 45 Connector Connect to the HDBT receiver (for example, EXT3-H- -T). POE The port can provide or
receiver PoE.
7 HDMI OUT Connector Connect to an HDMI acceptor.
8
RS- 232 (G, Rx, Tx) 3- pin Terminal
Block Connector
This port has two functions selectable by the SETUP DIP- switches:
1. To send/receive RS- 232 data over the HDBaseT link.
2. For FW Upgrade.
9 IR 3.5mm Mini Jack Connector
Connect to an external infrared emitter / sensor.
The IR signal is passed over the HDBaseT link.
10 SETUP DIP- Set switches the operation DIP- switches. Refer to DIP-Switch Settings on page 3.
11
48V DC
48V DC connector for powering the unit (when not powered by PoE from the
transmitter).
Step 4: -H- - -H- -R Mount EXT3 POE T / EXT3 POE
Install EXT3-H- - -H- -RPOE T / EXT3 POE using one of the following methods:
• Attach the rubber and place the unit on a flat surface.feet
• Fasten a bracket (included) on each side of the unit and attach it to a flat surface (see
www.kramerav.com/downloads/EXT3-H- -T POE / www.kramerav.com/downloads/EXT3-H- -RPOE
).
• Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/EXT3-H- -TPOE
/
www.kramerav.com/downloads/EXT3-H- -RPOE ).
• Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
• Maximum mounting height for the device is 2 meters.
EXT3-H-REXT3-H-R
EXT3-H-POE-R
ON
LINK
OUT
IN
PoE
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
1
2
O
N
Step 5: Connect inputs and outputs
Always switch OFF the power on before each device connecting it to EXT3-H- -T / EXT3-H- - your POE POE R. For best results, we
recommend that you always use the Kramer high-performance cables to connect AV equipment to EXT3-H- -T / EXT3-H- - POE POE R.
The range between & Tx Rx is:
40M - 4K@60
70M - 4K@30 & 1080P
Wiring the RJ-45 Connectors
This section defines the pinout, using a HDBT
STRAIGHT
- -pin to pin cable
with
RJ- . 45 connectors
EIA /TIA 568B
PIN
Wire Color
1
Orange / White
It is recommended that the cable ground shielding be
connected/soldered to the connector shield.
2
Orange
3
Green / White
4
Blue
To achieve specified extension distances, use the recommended
Kramer cables available at www.kramerav.com/product/EXT3-H-
POE-R / http:// www.kramerav.com/product/EXT3-H- -TPOE Using
third-party cables may cause damage!
5
Blue / White
6
Green
7
Brown / White
8
Brown
Step 6: -DIP Switch Settings
The DIP Switches are used to:-
• Configure the IR handling.
• -Enable RS 232 signal extension.
• Upgrade the HDBT (Valens) chipset.
A DIP– - switch Settings
All the DIP-switches are set to OFF (up) by defaults.
#
Feature
DIP switch- Settings
1
IR
Off (up) – IR pass through-
ON (down) – Add 38kHz modulation
2
RS- 232
Off (up) – RS- -232 pass through ON (down) – Valens programming
EXT3-H-P E-To
KC
- 1/5VB
HDBT
Blu-ray
Player
IR
RS-232
Display
RS-232
HDMI
HDMI
EXT3-H-PoE R
Blu-ray
Remote
Control
IR
PoE
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-
232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
12
O
N
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
12
O
N
Product specificaties
| Merk: | Kramer |
| Categorie: | AV extender |
| Model: | EXT3-H-POE-T |
Heb je hulp nodig?
Als je hulp nodig hebt met Kramer EXT3-H-POE-T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding AV extender Kramer
1 Juli 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025
26 November 2024
26 November 2024
26 November 2024
26 November 2024
26 November 2024
26 November 2024
Handleiding AV extender
- InFocus
- Digitus
- MKC
- Speaka
- Intelix
- Act
- Kindermann
- IOGEAR
- Hall Research
- Ecler
- Accell
- IMG Stage Line
- I3-Technologies
- Ag Neovo
- Peerless
Nieuwste handleidingen voor AV extender
30 Juni 2025
28 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025