SkyRC eN18 Handleiding

Bekijk gratis de handleiding van SkyRC eN18 (2 pagina’s), behorend tot de categorie Batterij-oplader. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.9 sterren uit 5 reviews. Heb je een vraag over SkyRC eN18 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction Manual

SK - 100184

eN18 NiMH Battery Charger

V1.0

INTRODUCTION

Congratulations on your choice of SkyRC eN18 charger.

eN18 is an easy-operation charger for 4-8S NiMH battery. It will start charging

once you insert the battery. Please read the instructions carefully before using.

LED STATUS EXPLANATION

USING THE CHARGER

SPECIFICATION

Bi-Color LED: status at a glance

Reverse polarity protection

Easy operation: universal-voltage input

Short circuit protection

LED Status

Flashes GREEN

Steady GREEN

Charging Status

Charging

Fully charged

Input: AC100V-240V 50/60Hz

Battery Type: NiMH

Output Voltage: 4.8V-14.4V

Output Current: 1.2A

Output Power: 18W Max.

Battery Cell: 4-8S

Output Cable Length: 70cm

Size: 85mm×50mm×54mm

FEATURES

OUTPUT CONNECTOR*

Net Weight: 120g

Operating Temperature: 0℃-40℃

（32℉-104℉）

Relative Humidity: 5%-75%

Storage Temperature: -10℃ - 70℃

（14°F-158°F）

Storage Humidity: 5%-75%

LED Status

Steady RED

Flashes RED*

Charging Status

Standby

Error

If the LED flashes RED, it should be that the battery is connected reversely,

over-discharged, or could not reach the specified voltage, or the battery

cells are not applicable. If you doubt that the connection is reversed,

please remove the battery immediately and check the battery polarity.

*

*Please disconnect the battery and the AC power source when fully charged.

Status

Indicator

NI-MH Battery

or

Tamiya Male

Deans Male

Optional Parts

Deans Female

to Tamiya Male

SK-600023-17

Tamiya Female

to Mini Tamiya Male

SK-600023-18

LED stays in steady RED

Standby

LED flashes GREEN

Charging

*The specific input converter

type refers to the actual SKU

description.

DO NOT attempt to charge LiPo batteries.

IT WILL CAUSE FIRES!

1.Connect the charger to the wall socket. The LED will be steady RED, reflecting

it is on standby.

2.Connect the battery; the charger will start charging automatically with LED

flashing in GREEN.

3.When fully charged, the LED will stay in steady GREEN.

The charging cables is not included in

the package. You need to purchase

them separately.

*The specific connector

refers o the actual SKU

description.

Detachable

Input Converter

Product specificaties