Silvercrest SBL 3 A2 Handleiding
Silvercrest
Speaker
SBL 3 A2
Bekijk gratis de handleiding van Silvercrest SBL 3 A2 (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over Silvercrest SBL 3 A2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
Thank you for your trust!
Congratulations on your new Bluetooth mini loudspeaker.
For safe handling of the device and in order to get to know the entire range
of features:
• Thoroughly read these user instructions prior to initial use.
• Above all, observe the safety information!
• The device should only be used as described in this copy of
the user instructions.
• Keep this copy of the user instructions for future reference.
• If you pass the device on to someone else, please include
this copy of the user instructions. The user instructions are
a part of the product.
We hope you enjoy your new Bluetooth mini loudspeaker!
Notes on trademarks
The Bluetooth
®
word mark and the Bluetooth (®) logo are registered trade-
marks of Bluetooth SIG Inc. (Special Interest Group), any use of the trade-
mark by the Hoyer Handel GmbH is effected within the framework of a
licence. All other names and trademarks are the property of their respective
owners.
Symbols on your device
The symbol means that the content of the user instructions must be
observed.
Intended purpose
This is an entertainment electronics device. The Bluetooth loudspeaker is in-
tended for playing sound from audio devices via Bluetooth or using the
3.5 mm jack socket.
The device is designed for private use. This device must not be used for com-
mercial purposes.
Do not make any changes or carry out any repairs. The manufacturer is not
liable for damage or malfunctions caused by improper repairs or modifica-
tions. This is the sole responsibility of the user.
Safety information
Warnings
If necessary, the following symbols and warnings will be used in these user
instructions:
DANGER! This symbol, in combination with the note “Danger”
means a high risk. Failure to observe this warning may result in
injury to life and limb.
WARNING! This symbol, in combination with the note “Warn-
ing” means a moderate risk. Failure to observe this warning may
result in injury or serious material damage.
CAUTION! Low risk: failure to observe this warning may result in
minor injury or material damage.
NOTE: circumstances and specifics that must be observed when handling
the device.
DANGER for children and people with
disabilities
~Packing materials are not children's toys. Children must not be allowed
to play with the plastic bags. There is a risk of suffocation.
~This device is not designed to be used by people (including children)
with limited physical, sensory or mental capabilities or people without
adequate experience and/or understanding, unless they are supervised
by someone responsible for their safety or are instructed by them on
how to use the device.
~Children must not play with the device.
~Cleaning and user maintenance must not be performed by children.
~Keep the device out of the reach of children.
DANGER from the battery
~This device must not be thrown into fire. DANGER OF EXPLOSION!
~The device must not be covered while the battery is charging.
~
The device must only be charged in a dry environment.
~The device contains a lithium polymer battery.
- The battery cannot be removed.
- This device must not be opened.
- Completely dispose of the device.
~Do not expose the device to direct sunshine or heat. The ambient tem-
perature should not be lower than 10 °C or higher than 40 °C. Please
remember that in a car the storage temperature may significantly ex-
ceed 40 °C.
~If the device is to be charged via a USB 2.0 or 3.0 computer socket, at
least one more USB 2.0 or 3.0 computer socket must be available. Un-
less this is the case, the loudspeaker must not be charged.
~The battery may only be charged with the original accessory (USB
charger cable).
WARNING! Risk of material damage
~If you notice any irregularities (e.g. unusual noises, strange smells or
smoke developing) turn the device off immediately and remove all ca-
bles. Do not use the device any longer.
~If the device is moved from a cold location to a warm location, conden-
sate may form in the device. Leave the device switched off for a few
hours to become acclimatised.
~Protect the device against damage, e.g. from:
- Drips and water splashes
- Heat, direct sun radiation and open flames (e.g. candles)
- Knocks and similar violent effects
~Protect the cable against damage, e.g. from:
- sharp edges
- hot places
- clamping or crushing
~Do not use any astringent or abrasive cleaning agents.
~In order to avoid any hazards, do not make modifications to the device.
Repairs must be carried out by a specialist workshop or the Service
Centre.
Items supplied
1 Bluetooth loudspeaker
1 USB charger cable (Type A on Micro USB)1
1 3.5 mm stereo jack cable2
1 copy of the user instructions
In the event of incomplete or defective delivery, please contact the responsible
service centre of the manufacturer (see “Warranty of HOYER Handel GmbH”).
Before using for the first time
• Remove all packing materials.
• Remove the protective film on the underside of the device.
• Check that the device is undamaged. A damaged device must never be
used.
Overview Charging
WARNING!
~The device must not be covered while the battery is charging.
~The device must only be charged in a dry environment.
NOTES:
• When using a USB power unit (not included in items supplied), comply
with its user instructions. The USB power unit must be able to output at
least 1A output current.
• Charge the battery fully before using the device.
• The maximum battery capacity is reached after approx. 4 - 5 charging
cycles.
• At a battery capacity of less than approx. 10%, an audio signal will
sound once and the charging LED will be lit red until the device au-12
tomatically switches itself off.
• The charging time of an empty battery is approx. 2 - 2.5 hours. Play-
back is possible during the charging process, however this extends the
charging time.
1. Connect the Micro USB plug of the USB charger cable1 to the Micro
USB port3 of the device.
2. Connect the USB-A plug of the USB charger cable1 e.g. to the USB
port of a PC or to a USB power unit (not included in items supplied).
The charging LED12 is lit red and goes out when the battery is fully
charged.
Operation
Functions of the buttons
NOTE: it is possible that not all of the functions will be supported by all au-
dio devices. This is not a device error.
LED displays
Establishing a Bluetooth connection
NOTES:
• The identification of the loudspeaker is “SBL 3 A2”.
• After switching on, the loudspeaker automatically tries to reconnect to
the last paired device or to establish a new connection.
• Please observe that establishing the connection may vary slightly de-
pending on the audio device and the software used.
• The Bluetooth range is 10 metres.
• The loudspeaker switches off if no Bluetooth connection can be estab-
lished within 10 minutes.
• With moderate volume settings, the loudspeaker can be used for a
playback period of approx. 19 hours with the Bluetooth connection es-
tablished.
• If you pass the loudspeaker on to someone else, in order to protect your
data and your privacy, you should disconnect the Bluetooth connection
to the device and delete it from the connection list on your smartphone.
1. If necessary, remove the plug of the 3.5 mm stereo jack cable2 from
the jack socket4.
2. Switch the loudspeaker on using the button 6. An audio signal
sounds. The LED11 flashes white. The Bluetooth identification of the de-
vice is sent.
3. Switch on the audio device (e.g. smartphone) and start the Bluetooth
connection. The audio device should now receive the device identifica-
tion “SBL 3 A2”.
4. Establish a connection to the Bluetooth loudspeaker on the audio de-
vice. Both devices are now interconnected. The LED11 on the device
flashes white slowly and an audio signal sounds.
NOTE: it is possible that audio devices remember the identification of the
loudspeaker. Thus it is possible that a new connection may not be have to
be established manually while the Bluetooth function is activated.
5. Now, start the playback of a music track on the audio device. The
sound is played back via the loudspeaker5.
1
USB charger cable for Micro USB/Type A
7Button
23.5 mm stereo jack cable 8Button
3 9Micro USB port Button
4Jack socket 10 Pairing button
5Loudspeaker 11
Operating mode LED
6On/off button 12 Charging LED
1 2 3 4
5
6
789101112
Button Function
6
• Switching on /off: press for approx. 2 sec., a brief sound se-
quence is audible.
7
• Press briefly: increase the volume (audio signal at maximum
volume)
• Keep pressed: next track
8
• Press briefly: pause / play
9
• Press briefly: reduce the volume (audio signal sounds at min-
imum volume)
• Keep pressed for 1x: start of track
• Keep pressed for 2x: previous track
10
• Press briefly until a sound can be heard. The active connection
is interrupted and a new one can be set up.
• Press and hold on one loudspeaker to connect 2 loudspeakers
with one another
LED display Function
Charging LED12 is lit red
Battery is being charged / or the battery ca-
pacity is under 10%
LED11 flashes white
Device sending device identification in order
to establish a Bluetooth connection (pairing)
LED11 flashes white very
slowly
Bluetooth connection is established
LED11 is lit white Left loudspeaker of paired loudspeakers
LED11 is lit green
The plug of the 3.5 mm stereo jack cable2 is
plugged into the jack socket (no Bluetooth 4
function)
MINI BLUETOOTH
®
SPEAKER SBL 3 A2
Operating instructions
GB
GB
IE
IAN 321395_1901
GB
IE
IAN 321395_1901
05/2019 ID: SBL 3 A2_19_V1.4
HOYER Handel GmbH
Tasköprüstraße 3
22761 Hamburg
GERMANY
Status of information:
NI
CY
NI
CY
Connecting two loudspeakers
NOTES:
• Playback via cable is always only possible with one loudspeaker.
• The distance between the loudspeakers should not be more than 10 m.
• If you are using two loudspeakers of type SBL 3 A2
together with your
smartphone, these can play the sound as a pair of stereo loudspeakers (True
Wireless Stereo TWS).
• If the audio device has previously been connected with a
loudspeaker of type SBL A2, please delete that connec- 3
tion from the list of Bluetooth connections.
1. Switch on both loudspeakers using the buttons 6. An audio signal
sounds and the LEDs11 flash white.
If one loudspeaker is still connected to an audio device (LED11 flashes
slowly white), briefly press the pairing button 10 on this loudspeak-
er. An audio signal sounds
and the LED
11
flashes white.
2. Hold down the pairing button 10 on one loudspeaker until an audio
signal sounds
. The two loudspeakers are now being paired with one an-
other.
3. After a brief time, the LED
11
on one of the loudspeakers flashes white,
while on the other the LED flashes slowly white. These two paired loud-
speakers can be connected to an audio device.
4. Switch on the audio device (e.g. smartphone) and start the Bluetooth
connection. The audio device should now receive the device identifica-
tion “SBL 3 A2”.
5. Establish a connection to the loudspeakers on the audio device. If you
are asked for a password, enter “0000”. All three devices are now in-
terconnected. The list of Bluetooth connections on the audio device dis-
plays the identification “SBL A2”. An audio signal sounds. The 3
loudspeaker with the flashing LED plays the right audio channel, 11
and the loudspeaker with the lit LED plays the left audio channel.
6. Now, start the playback of a music track on the audio device. The
sound is played back via the loudspeakers.
NOTES:
• Hold down the button 6 on one of the two paired loudspeakers to
switch off both devices simultaneously.
• To unpair two paired loudspeakers, hold down the pairing button
10 on the loudspeaker with the slowly flashing white LED 11 until
an audio signal sounds.
Disconnecting Bluetooth connection and searching for
a new device
If you want to connect another device to the loudspeaker via Bluetooth, pro-
ceed as follows:
1. The loudspeaker is switched on and Bluetooth is activated.
2. Press the button
10
briefly. An audio signal sounds and the operating
mode LED
11
flashes. The identification of the loudspeaker is sent.
3. Proceed as described under “Establishing a Bluetooth connection”.
Disconnecting a Bluetooth connection
In order to disconnect the Bluetooth connection, select one of the following
options:
• Press the button until the loudspeaker is switched off.6
• Press the button briefly. An audio signal sounds and the operat-10
ing mode LED11 flashes.
• Plug a jack into the jack socket4 on the loudspeaker. The operating
mode LED11 is lit green.
• The connection is also disconnected if the connected devices are set up
too far apart from each other or obstacles interfere with the radio link.
Playback using a cable (Aux in)
NOTE: playback via a cable has priority over the Bluetooth connection. Any
Bluetooth connection set up will be interrupted.
1. Plug the jack of the 3.5 mm stereo jack cable2 into the headphone
socket of the sound source (e.g. MP3 player, telephone) and the jack
socket4 on the loudspeaker.
2. Switch on the sound source.
3. Switch the loudspeaker on using the button 6. The LED11 is lit
green.
4. Start playback from the sound source. The sound is played back via the
loudspeaker5.
5. Set the volume on the sound source to the maximum level and adjust the
volume on the device using the buttons 9/7. The music track can
only be chosen via the sound source.
• Mute the device by pressing the button 8.
Cleaning / storing if not in use
NOTES:
• Disconnect all cable connections.
• Switch off the device using the button 6.
• Clean the device with a slightly damp cloth. Solvents, spirits, thinners
etc. must not be used, as they can damage the surface of the device.
• When not using the device, store it in a place where neither high tem-
peratures nor moisture can affect it.
• Charge the battery before storing the device away for a prolonged pe-
riod. Please note that if the device is stored for too long, this may re-
duce the battery capacity. Avoid a deep discharge of the battery.
Disposal
The battery integrated into this device must not be treated as household
waste. The device with the installed battery must be disposed of properly.
This product is subject to the provisions of European Direc-
tive 2012/19/EC. The symbol showing a wheelie bin
crossed through indicates that the product requires sepa-
rate refuse collection in the European Union. This applies to
the product and all accessories marked with this symbol.
Products marked as such may not be discarded with normal
domestic waste, but must be taken to a collection point for
recycling electrical and electronic devices. This disposal is free of charge.
This recycling symbol marks e.g. an object or parts of the
material as valuable for recycling. Protect the environment
and dispose of the product properly. Further information can
be obtained from your local disposal service or city/munic-
ipal administration.
Packaging
The packaging is made from recyclable materials. Dispose of the packaging
sorted by materials. When disposing of the packaging, make sure you comply
with the environmental regulations applicable in your country.
Trouble-shooting
If your Bluetooth loudspeaker fails to function as required, please try this
checklist first. Perhaps there is only a minor problem, and you can solve it
yourself.
CAUTION!
~Do not attempt to repair the device yourself under any circumstances.
Technical specifications
Subject to technical modification.
Notes on the EU declaration of conformity
HOYER Handel GmbH hereby declares that this product meets the basic re-
quirements of the RED 2014/53/EU and the ROHS Directive 2011/65/EU.
A complete declaration of conformity can be found on the Internet at:
http://qr.hoyerhandel.com/d/321395
Fault Possible causes / Action
No function
• Is the battery empty?
• Has the device switched off automatically?
No Bluetooth con-
nection
• Is the Bluetooth function of the audio device acti-
vated?
• Did you switch off the device?
• Is there a plug in the jack socket4 ?
Music cannot be
played via Blue-
tooth
• Is the volume set too low?
• Is a jack plugged into the jack socket4 on the
Bluetooth loudspeaker?
Model: SBL 3 A2
Power rating: 1x 3 W RMS
Bluetooth:
Frequency range:
Transmitting power:
Range:
Bluetooth v5 (A2DP v1.2, AVRCP v1.0)
2,402 - 2,480 MHz
5 dBm (max.)
up to 10 m
Sockets: 1 x Micro USB
1 x 3.5 mm stereo jack
Battery:
Charging time:
Playback time:
1x 3.7 V
,
lithium polymer, 1050 mAh (3.89 Wh)
approx. 2 - 2.5 hours
approx. 19 hours
USB port: Input voltage: 5 V
Input current: 1 A
Dimensions (dia. x H):
approx. 65 x 67 mm
Weight: approx. 165 g
Ambient conditions: 10 °C to 40 °C
Relative humidity 40 to 85 %
Symbols used
Warranty of the HOYERHandel GmbH
Dear Customer,
your device is provided with a 3 year warranty starting with the purchase
date. In the event of product defects, you are entitled to statutory rights
against the vendor. These statutory rights are not restricted by our warranty
presented in the following.
Warranty conditions
The warranty period starts with the purchase date. Please keep the original
purchase receipt in a safe place. This document is required to verify the pur-
chase.
If within three years from the purchase date of this product a material or fac-
tory defect occurs, the product will be repaired or replaced by us – at our
discretion – free of charge to you, or the purchase price will be refunded.
This warranty implies that within the period of three years the defective de-
vice and the purchase receipt are presented, including a brief written de-
scription of the defect and the time it occurred.
If the defect is covered by our warranty, the repaired or a new product will
be returned to you. No new warranty period starts with a repair or replace-
ment of the product.
Warranty period and statutory claims for defects
The warranty period is not extended when the warranty has been claimed.
This also applies to replaced and repaired parts. Any damages and defects
already existing at the time of purchase must be reported immediately upon
unpacking. Repairs arising after the expiration of the warranty period are
subject to a charge.
Warranty coverage
The device was produced carefully according to strict quality guidelines and
tested diligently prior to delivery.
The warranty applies to material or factory defects.
Excluded from the warranty are wear parts subject to normal
wear and damages to fragile parts, e.g. switches, batteries,
lamps or other parts manufactured from glass.
This warranty expires if the product is damaged, not used as intended or not
serviced. For the proper operation of the product, all instructions listed in the
operating instructions must be observed carefully. Any form of use and han-
dling that is advised against in the operating instructions or warned against
must always be avoided.
The product is only intended for private and not for commercial use. In the
case of incorrect and improper treatment, use of force and interventions not
performed by our authorised Service Centre, the warranty shall cease.
Handling in case of a warranty claim
In order to ensure prompt processing of your matter, please observe the fol-
lowing notes:
• Please keep the article number IAN: 321395_1901 and the pur-
chase receipt as a purchase verification for all inquiries.
• The article number can be found on the rating plate, an engraving, the
title page of your instructions (in the bottom left), or as a label on the
rear or underside of the device.
• If faulty operation or other defects occur, first contact the Service Centre
listed in the following by telephone or email.
• Then, you are able to send a product reported as defective free of
charge to the service address specified to you, including the purchase
receipt and the information on the defect and when it occurred.
At www.lidl-service.com you can download
this and many other manuals, product vide-
os and installation software.
This QR code takes you directly to the Lidl
Service website (www.lidl-service.com),
where you can enter the article number
(IAN)321395_1901 to open your user
instructions.
Service Centre
Service Great Britain
Tel.: 0800 404 7657
E-Mail: hoyer@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak)) (0,06 EUR/Min., (off peak))
E-Mail: hoyer@lidl.ie
Service Cyprus
Tel.: 8009 4409
E-Mail: hoyer@lidl.com.cy
IAN: 321395_1901
Supplier
Please note that the following address is no service address. First contact
the aforementioned Service Centre.
HOYER Handel GmbH
Tasköprüstraße 3
22761 Hamburg
GERMANY
With the CE marking, HOYER Handel GmbH declares con-
formity with EU guidelines.
This symbol reminds you to dispose of the packaging in an en-
vironmentally friendly manner.
Recyclable materials: cardboard (except corrugated card-
board)
Direct current
With the Serbian marking, HOYER Handel GmbH declares
conformity with the Serbian requirements.
zzxxyy
GB
IE
CY
Product specificaties
| Merk: | Silvercrest |
| Categorie: | Speaker |
| Model: | SBL 3 A2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Silvercrest SBL 3 A2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Silvercrest
4 Juli 2025
4 Juli 2025
4 Juli 2025
18 Juni 2023
3 Juni 2023
21 Mei 2023
20 Mei 2023
14 Mei 2023
11 Mei 2023
5 Mei 2023
Handleiding Speaker
- Boston Acoustics
- Acoustic Research
- Hive
- Barefoot Sound
- IMG Stage Line
- Mackie
- X-MINI
- Quadral
- DataVideo
- Delvcam
- Polk
- Voxx
- Xiaomi
- Roland
- DAS Audio
Nieuwste handleidingen voor Speaker
5 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025