Planet GSD-504 Handleiding

Bekijk gratis de handleiding van Planet GSD-504 (2 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over Planet GSD-504 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

Power

Notice

1. The device is a power-required device,

meaning it will not work till it is powered.

If your networks should be active all the

time, please consider using UPS (Uninter-

rupted Power Supply) for your device. It

will prevent you from network data loss

or network downtime.

2. In some areas, installing a surge sup-

pression device may also help to protect

your Switch from being damaged by un-

regulated surge or current to the Switch

or the power adapter.

1. Package Contents

Check the contents of your package for the following

parts:

Gigabit Ethernet

Switch x 1

5V DC

1A Power

Adapter x 1

User’s

Manual x 1

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them

again to repack the product in case there is a need to

return it to us for repair.

Hardware

Made from plastic and desktop size and wall-mount

design

LED indicators for system power, per port Link / Act

5V DC, 1A external power adapter

FCC, CE Class B compliant

4. LED Indicators

Figures 4-1 and 4-2 show the front panel of GSD-504

and GSD-804, respectively.

Figure 4-1: GSD-504 LED Panel

Figure 4-2: GSD-804 LED Panel

LED ColorFunction

PWR Green

Light Indicates that the Switch is

powered ON.

OFF Indicates that the Switch is

powered OFF.

Link/ACT Green

Light

Indicates the link

through that port is

successfully established at

10/100/1000Mbps.

Blink

Indicates the Switch is

actively sending or receiving

data over that port.

2. Product Features

RJ-45 Interface

5/8 10/100/1000Mbps Gigabit Ethernet ports

Complies with IEEE 802.3, 10Base-T, IEEE 802.3u

100Base-TX, IEEE 802.3ab 1000Base-T

Supports Auto MDI/MDI-X function

Switching

Hardware based 10/100Mbps, Half / Full Duplex and

1000Mbps Full Duplex mode, Flow Control and Auto-

negotiation

Features Store-and-Forward mode with wire-speed

ltering and forwarding rates

IEEE 802.3x ow control for Full Duplex operation

and backpressure for Half Duplex operation

Integrated address look-up engine, supporting 2K/8K

absolute MAC addresses (GSD-504 / GSD-804)

9K Jumbo packet size

Power Saving ability for Green networking

Automatic Address Learning and Address Aging

Supports CSMA/CD protocol

3. Switch Top Panel

Figures 3-1 and 3-2 show the top panel of GSD-504

and GSD-804, respectively.

Figure 3-1: GSD-504 Top Panel

Figure 3-2: GSD-804 Top Panel

6. Installing the Switch

This part describes how to install your Gigabit Ethernet

Switch and make connections to it. Please read the

following topics and perform the procedures in the order

being presented.

Note

This Switch does not need software configu-

ration.

Desktop Installation

To install the Switch on desktop, simply follow the

following steps:

Step 1:Place the Switch on the desk near a power

source.

Step 2:Keep some ventilation space between the

Switch and the surrounding objects.

Note

When choosing a location, please keep in

mind the environmental restrictions dis-

cussed in Chapter 7 under Product Specifi-

cations.

5. Switch Rear Panel

Figures 5-1 and 5-2 show the rear panel of GSD-504

and GSD-804, respectively.

Figure 5-1: GSD-504 Rear Panel

Figure 5-2: GSD-804 Rear Panel

Product specificaties