Cisco SF350 Handleiding
Pagina's 16 Schakelaar
Bekijk de handleiding van Cisco SF350 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

Quick Start Guide
Cisco 350 Series Managed Switches

2Cisco 350 Series Managed Switches
Welcome
Thank you for choosing the Cisco 350 Series Managed Switches. The
switches are designed to be operational right out-of-the-box as standard
layer 2 and 3 switches. Using the default configuration, your switch
forwards packets between the connecting devices after power up.
This guide familiarizes you with the switch layout and describes how to
deploy the switch in your network. For additional information, see
www.cisco.com/go/350switches.
Package Contents
•Your Cisco 350 Series Managed Switch
•Power Cord
•Rack-Mount Kit and Rubber Feet
•Wall Mounting Package for SG350-10, SG350-10P, SG350-10MP
•DB-9 to RJ45 Serial Cable
•Quick Start Guide
•Pointer Card with China RoHS
•Technical Support Contacts
•EU Directives 1999/5/EC Compliance Information (for EU SKU only)
Before You Begin
Before you begin the installation, make sure that you have the following:
•Category 5e or higher RJ-45 Ethernet cables for connecting network
devices.
•Console cable for using the console port to manage your switch.
•Tools for installing the hardware. The rack-mount kit packed with the
switch contains four rubber feet for desktop placement, and two
brackets and twelve screws for rack-mounting. If the supplied screws
are lost, use replacement screws in the following size:
–Diameter of the screw head: 6.9 mm
–Length of face of screw head to base of screw: 5.9 mm
–Shaft diameter: 3.94 mm
•The wall mount kit includes screws and anchors. If the supplied screws
are lost, use replacement screws in the following size:
1

Cisco 350 Series Managed Switches3
–Diameter of the screw head: 6.8 mm
–Length of face of screw head to base of screw: 16 mm
–Shaft diameter: 3.5 x 1.3 mm
•Computer with Internet Explorer (version 9.0, 10.0, 11.0), or Firefox
(version 36.0, 37.0, or higher), or Chrome (version 40,41,42 or higher) for
using the web-based interface or the console port to manage your
switch.
Mounting the Cisco 350 Series Switches
Depending on your switch, there are two or three ways to install the switch:
•Place the switch on a flat surface. To place the switch on a desktop,
install the four rubber feet (included) on the bottom of the switch.
•Mount the switch in a standard rack (1 rack unit high).
•Most of the 350 Series Cisco switches include wall-mounting slots on
the bottom of the device.
Placement Tips
Do not deploy the switch in a location where any of the following
conditions exist:
•Ambient Temperature—To prevent the switch from overheating, do not
operate it in an area that exceeds an ambient temperature of 122°F
(50°C).
•Air Flow—Be sure that there is adequate air flow around the switch.
•Mechanical Loading—Be sure that the switch is level and stable to
avoid any hazardous conditions.
•Circuit Overloading—Adding the switch to the power outlet must not
overload that circuit.
Rack Mounting
You can mount the switches in any standard size, 19-inch (about 48 cm)
wide rack. The switch requires 1 rack unit (RU) of space, which is 1.75
inches (44.45 mm) high.
CAUTIONFor stability, load the rack from the bottom to the top, with the
heaviest devices on the bottom. A top-heavy rack is likely to
be unstable and might tip over.
2
Product specificaties
| Merk: | Cisco |
| Categorie: | Schakelaar |
| Model: | SF350 |
Heb je hulp nodig?
Als je hulp nodig hebt met Cisco SF350 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden