Peavey RBN 112 Handleiding
Bekijk gratis de handleiding van Peavey RBN 112 (21 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 3.6 sterren uit 10 reviews. Heb je een vraag over Peavey RBN 112 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/21
www.peavey.com
RBN™ 112
Powered Speaker System
Operating
Manual
FCC/ICESCompliancyStatement
This Standard(s). device complies with Part 15 of the RSS FCC rules and Industry Canada license‐ exempt Operation is
subject following harmful interference, andtothe twoconditions:(1)thisdevicemaynotcause (2)thisdevicemust
accept any interference may operation. received, that cause undesired
Le conforme deprésent est appareil aux CNR Canada d’lndustrie applicables aux appareils radio exempts
licence. est autoriséeL’exploitation aux deux conditions suivantes: (1) I’appareil ne dedoit pas produire
brouillage, (2) I’utilisateur I’appareil brouillage leet de doitacceptertout radioélectriquesubi,mêmesi
brouillage susceptible fonctionnement.est d’encompromettrele
Warning: Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the
user’s authority to use the equipment.
Note – This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Rules. limits to provide reasonable protection against Part15oftheFCC These aredesigned
harmful in ainterference residentialinstallation. generates, uses, and radiate radioThisequipment can
frequency energy and, if installed and in accordance with instructions, harmful not used the maycause
interference to radio However, is communications. there no guarantee that interference will not occur in a
particularinstallation.If this equipment does cause harmful interference to radio or television reception,
which determined turning equipment and is to andcanbe by the off on,theuser encouraged try correctthe
interference followingbyoneormoreofthe measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Introduction
ank you for purchasing the Peavey® RBN™112 powered speaker system. e RBN™112 features a bi-amped
power section that provides 1000 watts of peak power for the woofer and 500 watts of peak power for the rib-
bon driver tweeter, both with DDT™ compression. Featuring a 12” Neo dual voice coil Scorpion® woofer and
the RD™2.6 true ribbon driver, the RBN™112 provides two independent mixed input channels, each with Gain
control and a mic/line gain switch, and each channel features a combo jack with 1/4” TRS & female XLR and a
balanced input with volume control. A DSP based crossover and processor provides extreme exibility to the
user faced with common location acoustics conditions.
Features
* Bi-amplied powered speaker system
* 1000 watts peak available woofer power, 500 watts peak available tweeter power
* Both power amps have DDT compression
* 12” Neodymium Dual Voice Coil Scorpion® woofer
* Peavey RD™ 2.6 ribbon driver tweeter on a low-coloration waveguide
* Peak SPL up to 130 dB with music!
* DSP based crossover, limiting and EQ
* EQ presets available via rotary encoder pushbutton select
* 9-band EQ and other system settings accessed via rotary encoder pushbutton select
* Dynamic bass boost function
* Up to 150 mS of architectural delay
* Fan cooled for maximum reliability
* Two independent mixed input channels, with Gain control and mic/line gain switch
* Each channel features a combo jack with 1/4” TRS & female XLR balanced input
* Input 2 has a 3.5 mm (1/8”) stereo media input jack
* Output connectors are male XLR
* One full handle on the right side, full handle on top rear
* Full length perforated steel grille with cloth backing
* Rugged polypropylene molded enclosure
* Pole mount built-in
* Reduced weight – Only 39 pounds!
* Flying point insert groups on top and bottom mate with VM™ 70 mounting bracket
Description
e Peavey® RBN™112 is a powered, bi-amplied, two-way speaker system engineered to provide very high
levels of performance in a compact powered loudspeaker. is two-way powered system is comprised of a 1000
W peak switching power amplier driving a 12” Neodymium magnet based dual voice coil Scorpion® woofer.
e RD™2.6 true ribbon tweeter is driven by a 500 W peak switching power amplier, and is coupled to a low
coloration waveguide with a coverage pattern of 110° horizontal by 30° vertical.
e RBN™112 is capable of up to 130 dB peak SPL. e enclosure utilizes tough high-performance plastic in an
injection-molded modied-trapezoidal form, with a full-length coated perforated steel grille to oer an attrac-
tive yet durable powered speaker system. e cabinet and grille are black.
ENGLISH
Product specificaties
| Merk: | Peavey |
| Categorie: | Speaker |
| Model: | RBN 112 |
Heb je hulp nodig?
Als je hulp nodig hebt met Peavey RBN 112 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Peavey
15 November 2024
12 Maart 2024
27 Juli 2023
22 Juni 2023
15 Juni 2023
1 Juni 2023
31 Mei 2023
21 Mei 2023
18 Mei 2023
10 Mei 2023
Handleiding Speaker
- Micca
- Brandt
- Woxter
- Lexibook
- Barefoot Sound
- Seeburg
- PSB
- NGS
- Standard Horizon
- RCA
- AwoX Striim
- Taga Harmony
- Audyssey
- Mtx Audio
- Martin Logan
Nieuwste handleidingen voor Speaker
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025