Peavey SP 118P Handleiding

Peavey Speaker SP 118P

Lees hieronder de 📖 handleiding in het Nederlandse voor Peavey SP 118P (21 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
www.peavey.com
SPÂŽ118P
Powered Speaker System
Product
Specications
FCC/ICES Compliancy Statement
This device complies with Part 15 of the FCC rules and Industry Canada license exempt RSS Standard(s). Operation is -
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, that may cause undesired operation.
Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes: (1) I’appareil ne doit pas produire de
brouillage, et (2) I’utilisateur de I’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Warning: Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the
user’s authority to use the equipment.
Note – This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, , uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures.
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
ENGLISH
SPÂŽ118P
e Peavey® SP® 118P Sub is a compact vented powered subwoofer system utilizing a Peavey® exclusive Pro Rid-
er™ 18” woofer, coupled to a power amplier with 1,150 watts peak available power. e full-length black perfo-
rated steel grille provides protection and a professional appearance, along with the 4-way handles for transport.
Multiple y points are provided to allow overhead rigging.
Internal line-level crossover with two outputs, independently electrically buered; one full-range thru output,
and one high-pass output.
A threaded pole-mount system provides a sturdy and stable platform to mount a suitably equipped speaker sys-
tem above the sub woofer. Either the SPÂŽ2P or the SPÂŽ4P two-way powered speakers are an excellent partner for
the SPÂŽ 118P Sub
e SP® 118P Sub speaker system power amplier providing the power is a low-distortion ultra-reliable fan-
cooled unit providing 1,150W peak available power for the system. e power supply for the power amp is a
switch mode type for low weight and high eciency. e amplier features our DDT™ compression, which vir-
tually eliminates audible power amplier clipping. Cooling is provided via a low-noise fan, for reliable operation
under any conditions.
Input is via two channels of a combo female XLR and 1/4” TRS phone jack with balanced input to the preamp/
EQ electronics, and a level control.
e internal speaker crossover and processor is implemented with a high-performance DSP system. Using 24
bit ADC’s and DAC’s operating at 96 kHz, the 32 bit xed point DSP processor provides all the ltering and EQ
functions to allow the subwoofer to operate at it’s best. DSP based limiting works in conjunction with the DDT™
compression to improve woofer reliability without intruding into the musical performance. An LCD display
shows what functions or presets have been selected, these functions are selected via a push-to-select rotary knob.
A High-Pass output provides a buered and balanced output signal for a satellite speaker to carry the high range
of the music, via a male XLR jack.
A Full-Range ru output has a male XLR connector. is output allows linking of additional speaker systems,
or feed of the signal to other devices, etc.
• VENTED BASS POWERED SUBWOOFER ENCLOSURE
• 1.150 WATTS PEAK AVAILABLE POWER
• PEAVEY® EXCLUSIVE PRO RIDER™ 18” WOOFER
• POWER AMP HAS FORCED AIR COOLING FOR MAXIMUM RELIABILITY
• POWERFUL YET PRECISE DSP BASED CROSSOVER NETWORK AND SPEAKER PROCESSING
• DSP BASED LIMITER FOR WOOFER PROTECTION
• 24 BIT ADC/DAC, 96 KHZ SAMPLE RATE, 32 BIT FIXED POINT DSP
• TWO CHANNELS WITH XLR/ONE QUARTER INCH COMBO JACK INPUTS
• TWO XLR OUTPUTS, ONE HIGH-PASS, ONE FULL RANGE THRU
• FULL-COVERAGE HEAVY-DUTY PERFORATED STEEL GRILL
• TWO FOUR-WAY INSET HANDLES
• THREADED POLE MOUNT WITH SPEAKER POLE INCLUDED
• MULTIPLE FLY POINTS


Product specificaties

Merk: Peavey
Categorie: Speaker
Model: SP 118P

Heb je hulp nodig?

Als je hulp nodig hebt met Peavey SP 118P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Peavey

Handleiding Speaker

Nieuwste handleidingen voor Speaker