Panasonic NA111PN Handleiding

Panasonic Niet gecategoriseerd NA111PN

Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic NA111PN (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
SENSOR
OPTIONS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
LASER
MARKERS
PARTICULAR
USE SENSORS
EX-F70 /
EX-F60
Selection
Guide
HD-T1
M-DW1
Wafer
Detection
EX-F1
LX-100
FZ-10
Metal-sheet
Double-feed Detection
GD
Other
Products
Liquid Leak
Detection
Liquid Level
Detection
Color Mark
Detection
NA1-11
Small / Slim
Object Detection
763
Related Information
Small / Slim Object Detection Area Sensor
NA1-11
Cross-beam scanning system to detect slim objects
Conforming to
EMC Directive
Letter or visiting card detectable!
Slim objects can be
detected by using the
cross-beam scanning
system.
UL Recognition
(Excluding 5 m cable length type)
Make sure to use light curtains
when using a sensing device
for personnel protection.
Refer to p.477~ for light curtains.
PNP output
type available
Emitting and receiving element pitch: 10 mm 0.394 in
A minimum sensing
object size of ø13.5 mm
ø 0.531 in is realized by
using an emitting and
receiving element pitch
of 10 mm 0.394 in.
Wide area
Though being very slim,
it realizes a wide sensing
area of 1 m 3.281 ft length
and 100 mm 3.937 in width.
It is most suitable for
object detection on a
wide assembly line, or for
detecting the dropping
of, or incursion by, small
objects whose travel path is
uncertain.
Just 10 mm thick0.394 in
It is extremely slim, being just 10 mm thick. 0.394 in
Further, it can be mounted in a narrow space since you
can select from two cable orientation directions.
Globally useable
It conforms to the EMC Directive and has UL Recognition.
Moreover, PNP output type, which is much in demand in
Europe, is also available.
1 m
3.281 ft
100 mm
3.937 in
It is possible to select from two cable orientation directions.
General terms and conditions ............. P.1■Sensor selection guide
..... P.11~ / P.727~
■
Glossary of terms.......................... P.983 ~■General precautions ..................... P.986 ~■
http://www.sunx.com
SUNX website
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
SENSOR
OPTIONS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
LASER
MARKERS
PARTICULAR
USE SENSORS
EX-F70 /
EX-F60
Selection
Guide
Wafer
Detection
Metal-sheet
Double-feed Detection
Other
Products
Liquid Leak
Detection
Liquid Level
Detection
Color Mark
Detection
HD-T1
M-DW1
EX-F1
LX-100
FZ-10
GD
NA1-11
Small / Slim
Object Detection
Small / Slim Object Detection Area Sensor NA1-11
764
APPLICATIONS
Detecting post-cards Detecting falling objects whose
path is uncertain
Detecting edge of moving object
No synchronization wire
Wiring is saved and made simple as no synchronization
wire is required between the emitter and the receiver.
Clearly visible indicator
A clearly visible large indicator, having a 55 mm 2.165 in
width, is incorporated on both the emitter and the
receiver. Further, if the sensing output is directly
connected to the large indicator input, the indicator can
be conveniently used as a large operation indicator.
Moreover, its operation can be selected as lighting or
blinking.
55 mm
2.165 in
Cross-beam Scanning System
In a conventional area sensor, slim objects cannot be detected since the emitting and the receiving elements are
scanned, synchronously, as a set. In contrast, in , only the elements NA1-11
1
to
11
of the emitter are scanned to
obtain emission. The elements of the receiver are not scanned, so that when element
1
of the emitter emits light,
all the elements of the receiver receive light. Hence, even if there is one element on the receiver which does not
receive light, it results in light interrupted operation. With this technique, detection of slim objects is possible.
ReceiverEmitter
Scanning
Scanning
Conventional area sensor
Receiver
Non-scanning
Emitter
Scanning
NA1-11
P.769 ~
DIMENSIONS
P.768 ~
PRECAUTIONS FOR PROPER USE
P.767 ~
SENSING CHARACTERISTICS
P.767
I/O CIRCUIT DIAGRAMS
P.766
SPECIFICATIONS
P.765
ORDER GUIDE
WARNING Never use this product in any
personnel safety application.
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
SENSOR
OPTIONS
WIRE-
SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
EX-F70 /
EX-F60
Selection
Guide
HD-T1
M-DW1
Wafer
Detection
EX-F1
LX-100
FZ-10
Metal-sheet
Double-feed Detection
GD
Other
Products
Liquid Leak
Detection
Liquid Level
Detection
Color Mark
Detection
NA1-11
765
Small / Slim Object Detection Area Sensor NA1-11
PARTICULAR
USE
SENSORS
Small / Slim
Object Detection
ORDER GUIDE
Notes: 1) The sensing range is the possible setting distance between the emitter and the receiver.
The sensor can detect an object less than 0.17 m 0.558 ft away.
2) The model No. with suffi x “P” shown on the label affi xed to the product is the emitter, “ ” shown on the label is the receiver.D
(e.g.) Emitter of : , Receiver of : NA1-11 NA1-11P NA1-11 NA1-11D
Sensor mounting bracket
MS-NA1-1•
MS-NA2-1•
Type Appearance Sensing range (Note1) Model No.(Note2) Output
NPN output
Sensing height:
100 mm 3.937 in
Element
pitch: 10 mm
0.394 in
No. of elements
per emitter /
receiver: 11
0.17 to 1 m
0.558 to 3.281 ft
NA1-11
NPN open-collector transistor
5 m 16.404 ft
cable length
NA1-11-C5
PNP output NA1-11-PN PNP open-collector transistor
Designation Model No. Description
Sensor
mounting
bracket
MS-NA1-1 Four bracket set
Four M4 (length 15 mm 0.591 in) screws with washers,
eight nuts, four hooks, four spacers and eight M4 (length
18 mm 0.709 in) screws with washers are attached.
(Spacers are not attached with .)MS-NA1-1
MS-NA2-1
Actual sensing range of the sensor
Receiver cannot be
placed in this range
Emitter Receiver
Setting range of the receiver
0.17 m 0.558 ft
1 m 3.281 ft
Receiver
M4 screws with washers, nuts
and hooks are attached.
M4 screws with washers, nuts,
hooks and spacers are attached.
OPTIONS

Product specificaties

Merk: Panasonic
Categorie: Niet gecategoriseerd
Model: NA111PN

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic NA111PN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Panasonic

Panasonic

Panasonic SC-PM272 Handleiding

3 April 2024
Panasonic

Panasonic FV-SWGR1 Handleiding

15 Maart 2024
Panasonic

Panasonic EQ-34-PN Handleiding

13 Maart 2024
Panasonic

Panasonic VRF-U-LE2-SPP Handleiding

11 Maart 2024
Panasonic

Panasonic ER-GP23 Handleiding

26 Februari 2024
Panasonic

Panasonic ER-FGP65 Handleiding

26 Februari 2024
Panasonic

Panasonic VL-DM200BX Handleiding

17 November 2023
Panasonic

Panasonic VL-SW251CX Handleiding

17 November 2023
Panasonic

Panasonic VL-SDM100BX Handleiding

17 November 2023
Panasonic

Panasonic VL-SDM200BX Handleiding

17 November 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024