NUVO 63/522 Handleiding


Pagina's 4 Verlichting

Bekijk de handleiding van NUVO 63/522 gratis online of download de PDF. 15 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

1
WIRING DIAGRAM
LED UNDER CABINET
FIXTURE
Models: 63-500, 63-501, 63-502, 63-503, 63-504, 63-505,
63-520, 63-521, 63-522, 63-523, 63-524, 63-525
INSTALLATION: Mounting – Direct
STEP 1: Open the two mounting screw covers located on the
front edge of the xture (A).
STEP 2: Place the xture in desired position and mount with
included screws (B).
STEP 3: Close the mounting screw cover.
Mounting – Keyhole
STEP 1: Place the xture in the desired location, open the front
panel using a at tool to pry it open, and mark the locations of the
keyholes through the wiring area (C).
STEP 2: Install (2) screws into the marked locations.
STEP 3: Mount xture through 2 keyholes on back of device.
Tighten screws if required (D).
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xture. Retain for future reference.
Satco Products, Inc.
Brentwood, NY 11717© Copyright 2024 Satco Products, Inc. 7/24
WARNING: Risk of Fire or Electric Shock
• LED Under Cabinet Fixture installation requires knowledge of luminaries’
electrical systems. If not qualied, do not attempt installation. Contact
a qualied electrician.
• To reduce risk of re and over-heating, secure all connections.
• TURN OFF the electrical power before proceeding.
• The electrical rating of this product is 120V/60Hz.
• To prevent wiring damage or abrasion, do not expose wiring to edges
of sheet metal or other sharp objects.
• Do not make or alter any open holes in an enclosure of wiring or
electrical components during installation.
• Not rated for wet locations.
• This product must be installed in accordance with the owner’s manual,
current electrical codes and/or the current National Electric Code (NEC).
WARRANTY: This product is guaranteed for a 5-year warranty. Any
quality issue in normal use within the warranty period, will be repaired or
replaced according to the situation and under the condition specications
can be provided. Visit www.Satco.com for full warranty details and
dimmer compatibility information.
Model # (Color) Dimensions
63-500 (Wht), 63-520 (Dk Brz) 8"L x 3 1/2"W (203mm x 90mm)
63-501 (Wht), 63-521 (Dk Brz) 11"L x 3 1/2"W (280mm x 90mm)
63-502 (Wht), 63-522 (Dk Brz) 14"L x 3 1/2"W (355mm x 90mm)
63-503 (Wht), 63-523 (Dk Brz) 22"L x 3 1/2"W (559mm x 90mm)
63-504 (Wht), 63-524 (Dk Brz) 28"L x 3 1/2"W (711mm x 90mm)
63-505 (Wht), 63-525 (Dk Brz) 34"L x 3 1/2”W (863mm x 90mm)
(B)(A)
Mounting
Screw
Cover
Mounting
Screw
(C)(D)
WIRING: Option 1 – Power Cord
STEP 1: Mount the xture.
STEP 2: Remove the electrical port cover on the INPUT side.
STEP 3: Connect the power cable to the female port on the
xture.
STEP 4: Plug the power cable into a 120 Volt outlet.
STEP 5: Bundle the excess power cord with zip ties or twist ties.
Electrical Port
Cover
Option 2 – Hardwire to a Junction Box
(sold separately)
STEP 1: Disconnect power from the breaker or fuse box.
STEP 2: Remove the electrical port cover from the INPUT end.
STEP 3: Use the provided end-to-end connector or link cable
accessory to link the junction box to the INPUT side of the xture.
STEP 4: Connect the OUTPUT end of the end-to-end connector
to the junction box.
STEP 5: Open the junction box and remove the most convenient
of the three knockouts.
STEP 6: Mount the junction box and the xture to the cabinet.
STEP 7: Attach the 3/8" die-cast connector to the junction box
and pull wiring through it.
STEP 8: Connect wiring using above wiring diagram.
STEP 9: Close the junction box.
End-to-End Connector

Beoordeel deze handleiding


Product specificaties

Merk: NUVO
Categorie: Verlichting
Model: 63/522

Heb je hulp nodig?

Als je hulp nodig hebt met NUVO 63/522 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden