NUVO 65/403 Handleiding

Bekijk gratis de handleiding van NUVO 65/403 (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.2 sterren uit 9 reviews. Heb je een vraag over NUVO 65/403 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WARNING:

• To reduce the risk of personal injury or property damage from re,

electric shock, falling parts, cuts/abrasions, and other hazards read

all warnings and instructions included with and on the xture and all

xture labels.

• Commercial installation, service and maintenance of luminaries should

be performed by a qualied licensed electrician. For The installation:

If you are unsure about the installation or maintenance of the

luminaries, consult a qualied licensed electrician and check your

local electrical code.

• Turn off electrical power at fuse or circuit breaker before wiring xture

to the power supply.

• Turn off the power when you perform any maintenance.

• All connections should be capped with UL approved wire connectors.

• Minimum size 18 AWG or 14 AWG for continuous runs.

• Risk of Burn. Disconnect power and allow xture to cool

before handling.

• Verify that supply voltage is correct by comparing it with the

luminaire label information.

GROUNDING INSTRUCTIONS:

• The grounding and bonding of the overall system shall be

done in accordance with NEC Article 600 and local codes.

LED HORIZONTAL STEP LIGHT

Models: 65-403, 65-404, 65-407, 65-408, 65-411, 65-412

Satco Products, Inc.

Brentwood, NY 11717

PRODUCT INFORMATION:

• Dimensions: Length 5.03" x Width 3.07" x Height 1.57"

• Weight: 0.46 lbs.

• Recessed lighting xture. Housing made by aluminum alloy

with safety glass.

• Suitable for wet location.

• Suitable for mounting within 1.2m (4ft) off the ground.

• 5-Year Warranty.

PRODUCT SPECIFICATIONS:

Model #VoltsWattsLumensKelvinBronzeWhiteGray

65-403, 65-407, 65-411120V

5W4073000K

65-40365-40765-411

65-404, 65-408, 65-412227V65-40465-40865-412

ELECTRICAL REQUIREMENTS:

• The LED driver must be suplied with 120 or 277V, 50/60 Hz

and connected to an individual, properly grounded branch circuit

protected by a 20 ampere circuit breaker. Use min. 75°C supply.

TOOLS REQUIRED:

• Wire Strippers

• Wire Cutters

INSTALLATION:

1. Turn off the power

2. Feed wires from [A] Lighting Fixture through the [B]

Mounting Strap into the [D] Recessed Box.

3. Connect Main Voltage supply wire to Black luminaire

wire (+). See Wiring Diagram.

4. Connect Neutral (Common) supply wire to White

luminaire wire (–). See Wiring Diagram.

5. Connect Green ground wire to Green luminaire wire.

See Wiring Diagram.

6. Assemble [B] Mounting Strip with [D] Recessed Box.

7. Assemble [A] Lighting Fixture with Fixed Mounting

Strap inside the Recessed Box. Make sure the lighting

xture is oriented correctly.

8. Turn on the power.

INSTALLATION AND SAFETY INSTRUCTIONS

IMPORTANT: Read before installing xuture. Retain for future reference.

© Copyright 2017 Satco Products, Inc. 7/17

WIRING DIAGRAM

MAIN VOLTAGE SUPPLY

NEUTRAL (COMMON)

GROUND CONNECTION

BLACK WIRE (+)

WHITE WIRE (–)

GREEN WIRE

FIXTURE

Product specificaties