Nitecore LA10 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Nitecore LA10 (1 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Features
·Ultra-portable camping light
·Two available colour temperature options
·LA10: Utilises a CREE XP-G2 S3 LED
·LA10 CRI: Utilises a Nichia 219B LED, CRI≥90
·Powered by a single AA sized battery
·Maximum runtime up to 23 hours
·3 Brightness levels and 1 special mode available
·High-efficiency regulation circuit provides unwavering output
·Reverse polarity protection
·Magnetic tail cap with tail stand capability
·IPX6 rated
·Impact resistant to 1.5 meter
Dimensions
Length: 3.08”(78.5mm)
Tube diameter: 0.89” (22.6mm)
Weight: 1.51oz(42.7g)(without battery)
Accessories
Lanyard, O-ring
Battery Options
Output & Runtime
NOTICE: The above data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL1 using 1x AA (1.2V, 2450mAh) battery under
laboratory conditions. The data may vary slightly during real-world use due to battery
type, individual usage habits and environmental factors.
Operating Instructions
Battery installation
Insert one AA battery with the + polarity pointing towards the head, as illustrated in the
diagram below:
Power ON/OFF
Tighten the tail cap to turn the light on, loosen the tail cap to turn the light off.
Note: The LA10/LA10 CRI’s light bar has lipstick-like extensile and retractile movement
through the open tube end. The bar can be moved by rotating the base of the light in
clockwise and anti-clockwise motion.
®
The All-Round Flashlight Expert
User Manual
Portable Camping light
LA10/LA10 CRI
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
20160818
Please find us on facebook:
NITECORE Flashlights
Thanks for purchasing NITECORE!
SIZE Nominal voltage
Compatible
Primary AA battery AA 1.5V Y (Recommended)
Rechargeable AA battery AA 1.2V Y (Recommended)
Primary AA Lithium battery L91 1.5V Y
Brightness adjustment
Turning the LA10/LA10 CRI on within a 2 second interval after it is turned off will
switch the light to the next available mode, repeat this process to cycle through
“low-mid-high-beacon”.
Note: The LA10/LA10 CRI does not have memory function, it will always turn on
at the low output after it has been turned off for more than 2 second.
Changing battery
Change battery when output becomes dim or unresponsive.
Maintenance
Wipe the threads every 6 months with clean cloth followed by a thin coating of
silicon-base lubricant.
Precautions
1. Do NOT install batteries backward, it renders the light inoperative.
2. Always use quality batteries, remove batteries from the battery compartment
when the light will be left unattended for extensive period.
3. Avoid direct eye exposure
4. Packaging contains small assembly parts, keep away from children to avoid
danger of suffocation.
5. Do NOT disassemble or modify the product.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service.
Should any problem covered under warranty occurs, customers can contact their
dealers or distributors in regards to their warranty claims, as long as the product
was purchased from an authorized dealer or distributor. NITECORE’s Warranty is
provided only for products purchased from an authorized source. This applies
to all NITECORE products.
Any DOA / defective product can be exchanged for a replacement through a local
distributor/dealer within the 15 days of purchase. After 15 days, all defective /
malfunctioning NITECORE® products can be repaired free of charge for a period
of 60 months (5 years) from the date of purchase. Beyond 60 months (5 years), a
limited warranty applies, covering the cost of labor and maintenance, but not the
cost of accessories or replacement parts. The warranty is nullified if the product(s)
is/are broken down, reconstructed and/or modified by unauthorized parties, or
damaged by batteries leakage. For the latest information on NITECORE®
products and services, please contact a local NITECORE® distributor or send an
email to service@nitecore.com.
※All images, text and statements specified herein this user manual are for
reference purpose only. Should any discrepancy occurs between this manual and
information specified on www.nitecore.com. Sysmax Industry Co., Ltd. reserves
the rights to interpret and amend the content of this document at any time without
prior notice.
LOW
LA10 LA10 CRI
MID
135 40 10
6h
1 30h min 23h
10m(Beam Diameter)
1.5m (Impact Resistant)
IPX6(Rated)
LUMENS LUMENS LUMENS
HIGH MID LOW
MID
85 30 9
6h
1 30h min 23h
10m(Beam Diameter)
1.5m (Impact Resistant)
IPX6(Rated)
LUMENS LUMENS LUMENS
HIGH MID LOW


Product specificaties

Merk: Nitecore
Categorie: Zaklamp
Model: LA10
Kleur van het product: Zwart
Gewicht: 42.7 g
Breedte: 78.5 mm
Aantal lampen: 1 lampen
Soort lamp: LED
LED-type: CREE XP-G2 S3
Ondersteund aantal accu's/batterijen: 1
Lichtstroom: 135 lm
Type batterij: AA
Type zaklamp: Zaklamp
Lichtbundelafstand (max): 10 m
Diameter hoofd: 22.6 mm

Heb je hulp nodig?

Als je hulp nodig hebt met Nitecore LA10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaklamp Nitecore

Handleiding Zaklamp

Nieuwste handleidingen voor Zaklamp