MGL Avionics Vega ASI-4 Handleiding
MGL Avionics
Meetapparatuur
Vega ASI-4
Bekijk gratis de handleiding van MGL Avionics Vega ASI-4 (13 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 65 mensen en kreeg gemiddeld 3.8 sterren uit 33 reviews. Heb je een vraag over MGL Avionics Vega ASI-4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/13
Introduction
The ASI-4 is a 2 1/4” sunlight readable instrument that provides a wide range airspeed indication in both digital and
analog tape formats. Airspeed is based on the pressure generated by a pitot tube system and a static port is provided as
well for use by high speed aircraft. In addition, the ASI-4 provides a flight timer since takeoff and records the maximum
airspeed reached.
Airspeed can be indicated in statute miles per hour (mph), kilometers per hour (km/h) or nautical miles per hour (kts). The
analog airspeed tape can be scaled according to the aircraft’s flying speed range and ranges for Vs0, Vs1, Vfe, Vno and
Vne can be set. The ASI-4 also provides a programmable Vs and Vne airspeed alarm output. ASI sensitivity can be
calibrated by the user to cater for errors caused by pitot tube placement.
The ASI-4 instrument measures airspeed from 16mph to 250mph and is well suited to slower aircraft due to very good
sensitivity and linearity at low air speeds.
1 Features
•Large 1.8” high resolution 160x128, sunlight readable, wide viewing angle, 1000 cd/m2 TFT LCD display
• Measures airspeed from 16mph to 250mph and is well suited to slow aircraft due to very good sensitivity
and linearity at low air speeds
• Includes a flight timer since takeoff
• Airspeed units can be set to miles per hour (mph), kilometer per hour (km/h) or nautical miles per hour
(kts)
• Analog tape with programmable ranges for Vs0, Vs1, Vfe, Vno and Vne
• Contains a programmable Vs and Vne airspeed alarm output
• Records maximum airspeed reached in permanent memory
• Standard 2 1/4” aircraft enclosure (can be front or rear mounted)
• Rotary control plus 2 independent buttons for easy menu navigation and user input
• Wide input supply voltage range of 8 to 30V DC with built in voltage reversal and over voltage protection
for harsh electrical environments
• 1 year limited warranty
Vega ASI-4
Airspeed Indicator (ASI)
Operating Manual – English 1.00
Vega ASI-4 Operating Manual Page 2
2 ASI-4 Layout
3 Main Display
F2 / Down Button:
Menu system: Softkey button
Sunlight readable color
graphic display:
Backlight can be adjusted in the
menu system
Rotary Control (Up/Down) & Enter Button:
Press the rotary control during the normal display screens to access the menu system. Rotate anti/clockwise for
up/down menu scrolling. Rotate the rotary control during the normal display mode to view the Max Values display.
F1 / Up Button:
Menu system: Softkey button
Normal Display: Start / Stop the
flight timer (Manual flight only)
2 1/4” enclosure.
Can be front or rear mounted
Airspeed unit
Digital airspeed
Airspeed tape
Duration of flight since takeoff
Vso (Min safe speed, landing)
Vs1 (Min safe speed, normal)
Vfe (Max flap speed)
Vno (Max maneuvering speed)
Vne (Max exceed speed)
Vega ASI-4 Operating Manual Page 3
3.1 Maximum Airspeed display
This display can be accessed by rotating the rotary control during the normal display
mode. Press the F1/Up button when the max values display is showing to reset the
maximum values to the current airspeed.
3.2 Start / Stop flight display
Press the F1/Up button during the normal display mode
to manually start/stop a flight. This key is only active if
the ASI-4 is setup to select the manual flight option
under the “TIMERS” setup menu.
Note: The maximum airspeed is stored in non-volatile
memory and is recalled on power-up.
Product specificaties
| Merk: | MGL Avionics |
| Categorie: | Meetapparatuur |
| Model: | Vega ASI-4 |
Heb je hulp nodig?
Als je hulp nodig hebt met MGL Avionics Vega ASI-4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Meetapparatuur MGL Avionics
25 November 2024
6 Juli 2023
4 Juli 2023
2 Juli 2023
30 Juni 2023
28 Juni 2023
24 Juni 2023
23 Juni 2023
21 Juni 2023
Handleiding Meetapparatuur
- IFM
- DriveTest
- Digitus
- Meec Tools
- Emko
- IKEA
- Phoenix Contact
- Laica
- Stabila
- Joy-it
- NEO Tools
- Muller
- PICO
- Hanna
- Kreg
Nieuwste handleidingen voor Meetapparatuur
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
12 Juni 2025