Lancom GS-3528X Handleiding

Lancom Schakelaar GS-3528X

Lees hieronder de 📖 handleiding in het Nederlandse voor Lancom GS-3528X (2 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

T E C H N I C A L D A T A

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This docu-

ment contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111901/1121

Hardware

Power supply Internal power supply unit (110–230 V, 50–60 Hz)

Power consumption max. 50 watts

Environment Temperature range 0–40°C; short-term temperature range 0–50°C; humidity 10–90%;

non-condensing

Housing Robust metal housing, 19“ 1U (442 x 44 x 375 mm > W x H x D) with removable mounting

brackets, network connectors on the front

Number of fans 1

Interfaces

ETH A12 TP Ethernet ports 10 / 100 / 1000 Mbps

A12 TP Ethernet ports 10 / 100 / 2500 Mbps

A4 SFP/SFP+ ports 1 / 10 Gbps

A28 concurrent Ethernet ports in total

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in

compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of

the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package Content

Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Mounting brackets Two 19” brackets for rackmounting

Cable 1 IEC power cord, 1 serial configuration cable 1.5 m

M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E

e 10 G SFP+ ports

Off Port inactive

Blue Link 10 Gbps

Green Link 1000 Mbps

a System

System: off Device switched off

System: green Device operational

System: red Hardware error

aConfiguration interface (Console)

Connect the configuration interface via the included serial

configuration cable to the serial interface of the device you want to

use for configuring / monitoring the switch.

bTP Ethernet interfaces

Use Ethernet cables to connect the interfaces 1 to 24 to your PC or

a LAN switch.

cSFP+ interfaces

Insert suitable LANCOM SFP modules into the SFP+ interfaces

25 to 28. Choose cables which are compatible with the SFP

modules and connect them as described in the module’s

documen tation.

dPower connector (device back side)

Supply power to the device via the power connector. Please

use the IEC power cable supplied or a country-specific LAN-

COM Power Cord.

LANCOM GS-3528X

Quick Reference Guide

C ud eadylo -r

a b c

4Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

AFor devices to be operated on the desktop, please attach the adhesive rubber

footpads.

ADo not rest any objects on top of the device and do not stack multiple devices.

A Keep the ventilation slots on the side of the device clear of obstruction.

AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

c TP Ethernet ports 10M / 100M / 1G

LEDs switched to Link/Act/Speed mode

Off Port inactive or disabled

Green Link 1000 Mbps

Green, blinking Data transfer, link 1000 Mbps

Orange Link < 1000 Mbps

Orange, blinking Data transfer, link < 1000 Mbps

LEDs switched to PoE mode

Off Port inactive or disabled

Green Port enabled, power supply to connected

device

Orange Hardware error

d TP Ethernet ports 100M / 1G / 2.5G

LEDs switched to Link/Act/Speed mode

Off Port inactive or disabled

Green Link 2500 Mbps

Green, blinking Data transfer, link 2500 Mbps

Orange Link < 2500 Mbps

Orange, blinking Data transfer, link < 2500 Mbps

LEDs switched to PoE mode

Off Port inactive or disabled

Green Port enabled, power supply to connected

device

Orange Hardware error

a b d ec

b Reset button

~5 sec. pressed Device restart

7~12 sec. pressed Configuration reset and device restart

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

Product specificaties

Merk:	Lancom
Categorie:	Schakelaar
Model:	GS-3528X
Kleur van het product:	Zwart
Gewicht:	4000 g
Breedte:	442 mm
Diepte:	375 mm
Hoogte:	44 mm
Gebruikershandleiding:	Ja
Vormfactor:	1U
Meegeleverde kabels:	AC, Serial
Wachtwoordbeveiliging:	Ja
Vermogensverbruik (max):	50 W
Certificering:	FCC Part 15 (CFR47) Class A
Netwerkstandaard:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ondersteunde beveiligingsalgoritmen:	SNMP, SNMPv2, SNMPv3
Aantal ventilatoren:	1 ventilator(en)
Upgraden van firmware mogelijk:	Ja
Web-gebaseerd management:	Ja
Rack-montage:	Ja
MAC adres filtering:	Ja
Vermogenstoevoer inclusief:	Ja
VLAN=ondersteuning:	Ja
Access Control List (ACL):	Ja
Power over Ethernet (PoE):	Nee
MAC-adrestabel:	32000 entries
Aantal VLANs:	4096
IGMP snooping:	Ja
Switch type:	Managed
Multicast-ondersteuning:	Ja
Aantal basis-switching RJ-45 Ethernet-poorten:	24
Console port:	RJ-45
Switch-laag:	L3
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
Throughput:	164000 Mpps
Jumbo Frames ondersteuning:	Ja
Port mirroring:	Ja
DHCP-functies:	DHCP Option 82
SSH/SSL support:	Ja
Warmtedissipatie:	170 BTU/h
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Code geharmoniseerd systeem (HS):	85176990
Aantal moduleslots SPF+:	4
Cloud-beheerd:	Ja
Rekbevestigingspakket:	Ja
Authenticatie type:	HWTACACS+, RADIUS
Locatie-instellingen (CLI) configureren:	Ja
Aantal gefilterde multicast-groepen:	1024