Kuzco Taro WS70410 Handleiding

Bekijk gratis de handleiding van Kuzco Taro WS70410 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.2 sterren uit 6 reviews. Heb je een vraag over Kuzco Taro WS70410 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION SHEET

WS70410

LED Wall Sconce

START FROM HERE

Please Note:

• This Kuzco fixture comes with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application

• 120V input voltage

1a.1b.1c.1e.4a.2a.2f.

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

1. Remove fixture from its original package

2. Separate mounting plate from canopy (1c)(2a)

by removing set screws with allen key(2f)

3. Attach mounting plate to electrical junction box (1c)(1a)

using junction box screws provided in hardware (1e)

package

4. Make proper electrical connections ( to “L”, blackhot

white to “N”, to with wire nuts neutralground“GND”)

(1b) provided in hardware package and then place

driver inside canopy (4a)(2a)

5. Attach canopy to mounting plate with set (2a)(1c)

screws (2f) and allen key

20210316

• Make sure is POWERCOMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Product specificaties