Kuzco Rotaire WS90120 Handleiding


Pagina's 1 Niet gecategoriseerd

Bekijk de handleiding van Kuzco Rotaire WS90120 gratis online of download de PDF. 6 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

INSTALLATION SHEET
WS90120
LED Wall Sconce
START FROM HERE
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
Please Note:
• This Kuzco LED fixtures comes with pre-wired LED module(s)
contact with the module could cause permanent damage
• For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required
• 120V input
• Make sure is POWERCOMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all times during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
20210728
1. Remove fixture from its original package
2. Separate mounting plate from canopy (1c)(2a)
by removing canopy screws (2b)
3. Attach mounting plate to electrical junction box (1c)(1a)
using junction box screws provided in hardware (1e)
package
4. Make proper electrical connections ( to “L”, blackhot
white to “N”, to with wire nuts neutralground“GND”)
(1b) provided in hardware package and then place
driver inside canopy (4a)(2a)
5. Attach mounting barrel to mounting surface with (3c)
screw (3b)
6. Attach canopy to mounting plate with canopy (2a)(1c)
screws (2b)
7.Secure fixture into the mounting barrelwith (5a) (3c)
spring loaded wall clip to secure to mounting (3a)
surface
8. Rotate fixture arms into desired position(3d)
1a.1b.1c.1e.4a.
3c.
3b.
3d.
5a.
3a.
2b.2a.

Beoordeel deze handleiding


Product specificaties

Merk: Kuzco
Categorie: Niet gecategoriseerd
Model: Rotaire WS90120

Heb je hulp nodig?

Als je hulp nodig hebt met Kuzco Rotaire WS90120 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden