Jung A 1701 P Handleiding
Jung
Niet gecategoriseerd
A 1701 P
Bekijk gratis de handleiding van Jung A 1701 P (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 1.5 reviews. Heb je een vraag over Jung A 1701 P of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
Universal centre plate
LB Management
Universal centre plate
Art. No. : ..1701..
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. In so doing, take all the circuit breakers into account, which support dangerous
voltages to the device and or load.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Insert
(2) Frame
(3a) Blind/shutter up / light on, brighter
(3b) Blind/shutter down / light off, darker
(4a) Disabling function
(4b) Memory function
1/4
32595313
J0082595313
01.03.2018
(5) Function LED
Red = Disabling function active
Green = Memory function active
(6) Status LED, green
On = Blind/shutter activated / light switched on
3 Function
Intended use
- Manual and time-controlled operation of Venetian blinds, shutters, awnings or lighting
- Operation of switching, dimming or Venetian blind insert or 3-wire extension from LB
management
Product characteristics
- Activation of blind/shutters, with Venetian blind insert
- Switching and dimming of lighting, with switching or dimming insert
- Ventilation position of the blind/shutter can be saved, with Venetian blind insert
- Switch-on brightness of lighting can be saved, with dimming insert
- Disabling function
- 2 switching times can be saved, which are repeated in a 24-hour cycle
Behaviour after a mains voltage failure
- All saved switching times have been deleted.
- The load is switched off.
- Ventilation position and switch-on brightness remain intact.
4 Operation of Venetian blind and shutters
Moving the blind/shutter
oPress button (3a) or (3b) for longer than one second.
The blind/shutter moves in the desired direction to the end position or stops when the
button is pressed again.
iIf a ventilation position has been saved, the blind stops in the ventilation position when
moving down from the top end position (see Saving the ventilation position).
Adjusting the slats
oPress the button (3a) or (3b) for less than one second.
Saving the ventilation position
To save and execute the ventilation position, the Venetian blind/shutter must be moved to the
upper end position and the status LEDs (6) switch off automatically after 2 minutes.
oFrom the top end position, press the button (3b) for longer than second.
The blind/shutter moves in the lower end position direction.
oPress and hold down the button (3a) and (3b).
The blind/shutter remains stopped, but continues to move after 4 seconds.
oAs soon as the desired ventilation position has been reached, release the buttons and
press the button (3a) within the next 4 seconds.
The ventilation position is saved. The blind/shutter moves back to the upper end position.
iIf the ventilation position is saved again, the old value is overwritten.
5 Operation of lighting
Switch light
oPress button (3a) or (3b) for less than 0.4 seconds.
iWith a dimming insert, the light switches to the brightness that was last set or a saved
brightness.
2/4
32595313
J0082595313
01.03.2018
LB Management
Universal centre plate
Switch light on with minimum brightness
oLong press on button (3b).
Adjust the brightness
oLong press on button (3a) or (3b).
Save switch-on brightness
oAdjust the brightness.
oPress buttons (3a) and (3b) for longer than 4 seconds.
Delete switch-on brightness
oPress button (3) briefly: Light switches on at the saved switch-on brightness.
oPress buttons (3a) and (3b) for longer than 4 seconds.
The switch-on brightness has been deleted.
Switching on takes place at the last brightness value set.
6 Activate functions
Saving switching times - Memory operation
oIn addition to normal operation with the button (3a) or (3b), press the button (4b) for longer
than one second.
The insert switches and the switching time is saved.
The device switches to memory operation. The function LED (5) turns continuously green.
Saved switching operations are repeated in a 24-hour cycle.
iAn upward and downward movement time, or on and off time, can be saved. The old
switching time will be replaced if a new one is saved.
iTo delete all the times, press the button (4b) for longer than 20 seconds until the function
LED (5) lights up for a second time.
Activating / deactivating memory operation
oPress the button (4b) for longer than 4 seconds.
In memory operation, the function LED (5) turns continuously green.
iIt is only possible to switch to memory operation if at least one switching time has been
saved.
Activating / deactivating the disabling function
The disabling function disables extension operation and deactivates memory operation. Manual
operation using the buttons (3a) and (3b) continues to be possible.
iWith Venetian blinds, extension operation in the "UP" direction (wind alarm) continuous to
be possible.
oPress the button (4a) for longer than 4 seconds.
The function LED (5) is red for as long as the disabling function is active.
Activating / deactivating night mode
In night mode, the status and function LEDs are not permanently lit, but only for 5 seconds after
a button is pressed.
oPress the buttons (4a) and (4b) for longer than 4 seconds.
Night mode is activated: The function LED turns red for 3 seconds.
Night mode is deactivated: The function LED turns green for 3 seconds.
3/4
32595313
J0082595313
01.03.2018
LB Management
Universal centre plate
Product specificaties
| Merk: | Jung |
| Categorie: | Niet gecategoriseerd |
| Model: | A 1701 P |
Heb je hulp nodig?
Als je hulp nodig hebt met Jung A 1701 P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Jung
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- TechN
- Mebus
- Gra-Vue
- FASTCABLiNG
- Mammut
- JK Audio
- Dacor
- MB Quart
- Code
- ENS
- QJ
- Arlo
- FaseLunare
- Foxconn
- Xtorm
Nieuwste handleidingen voor Niet gecategoriseerd
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025