Jung MBT 2424 Handleiding

Bekijk gratis de handleiding van Jung MBT 2424 (7 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over Jung MBT 2424 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Signal panel

Signal panel

Art. No. : MBT 2424

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and

other hazards.

Do not use any sharp objects, acids or organic solvents for cleaning. Device can be

damaged.

Do not operate the device with sharp or pointed objects. The surface could be damaged.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

Figure 1: Front view

(1)Sensor areas with status LED

(2)Labelling with push-in labels

(3)Position of the programming LED

(4)Fastening screws, front plate

A suitable bit for the safety screw is included.

3 Function

System information

This device is a product of the KNX system and complies with the KNX directives. Detailed

technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.

The function of this device depends upon the software. Detailed information on loadable

software and attainable functionality as well as the software itself can be obtained from the

manufacturer´s product database. Planning, installation and commissioning of the device are

1/7

82575503

J:0082575503

13.06.2013

Product specificaties