Jung A 17180 SW Handleiding

Bekijk gratis de handleiding van Jung A 17180 SW (10 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.9 sterren uit 6 reviews. Heb je een vraag over Jung A 17180 SW of wil je andere gebruikers van dit product iets vragen? Stel een vraag

LB management

LB management

LB management

LB managementLB management

Standard automatic switch 1.1 m, Standard automatic switch 2.2 m

Standard automatic switch 1.1 m

Standard automatic switch 1.1 m

Standard automatic switch 1.1 m

Standard automatic switch 1.1 mStandard automatic switch 1.1 m

Art. no. ..17180..

Standard automatic switch 2.2 m

Standard automatic switch 2.2 m

Standard automatic switch 2.2 m

Standard automatic switch 2.2 mStandard automatic switch 2.2 m

Art. no. ..17280..

User manual

User manual

User manual

User manualUser manual

1

1

1

11Safety instructions

Safety instructions

Safety instructions

Safety instructionsSafety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or load. In

Danger of electric shock. Always disconnect before carrying out work on the devise or load. In

Danger of electric shock. Always disconnect before carrying out work on the devise or load. In

Danger of electric shock. Always disconnect before carrying out work on the devise or load. InDanger of electric shock. Always disconnect before carrying out work on the devise or load. In

so doing, take all the circuit breakers into account, which support dangerous voltages to the

so doing, take all the circuit breakers into account, which support dangerous voltages to the

so doing, take all the circuit breakers into account, which support dangerous voltages to the

so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the

device and or load.

device and or load.

device and or load.

device and or load.device and or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load

Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load

Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load

Danger of electric shock. Device is not suitable for disconnection from supply voltage. The loadDanger of electric shock. Device is not suitable for disconnection from supply voltage. The load

is not electrically isolated from the mains even when the device is switched off.

is not electrically isolated from the mains even when the device is switched off.

is not electrically isolated from the mains even when the device is switched off.

is not electrically isolated from the mains even when the device is switched off.is not electrically isolated from the mains even when the device is switched off.

Do not press on the sensor window. Device can be damaged.

Do not press on the sensor window. Device can be damaged.

Do not press on the sensor window. Device can be damaged.

Do not press on the sensor window. Device can be damaged.Do not press on the sensor window. Device can be damaged.

The device is not suitable for use as a burglar alarm or other alarm.

The device is not suitable for use as a burglar alarm or other alarm.

The device is not suitable for use as a burglar alarm or other alarm.

The device is not suitable for use as a burglar alarm or other alarm.The device is not suitable for use as a burglar alarm or other alarm.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.

2

2

2

22Intended use

Intended use

Intended use

Intended useIntended use

–Automatic switching of lighting depending on the heat motion and ambient brightness

–Operation with flush-mounted insert for dimming or switching or 3-wire extension from LB

management

–Wall installation on flush-mounted insert

Product characteristics

Product characteristics

Product characteristics

Product characteristicsProduct characteristics

–Extension of the detection area in combination with 3-wire extension

–Operation with 2-wire or 3-wire extension, rotary dimmer extension or push-button

–Selectable brightness threshold

–Selectable sensitivity

–Fixed run-on time

–Switch on with last saved brightness or saved switch-on brightness, with dimming insert

–Switch-on brightness can be saved permanently via extension, with dimming insert

–Dimming light via extension with dimming insert

Motion detector cover 1.10m

–Screen for limiting the detection area

Automatic operation

Automatic operation

Automatic operation

Automatic operationAutomatic operation

The device detects heat motions of people, animals and objects.

–The light is switched on if a person enters the detection area and the brightness is below

the set threshold.

–The run-on time restarts with each detected motion.

–The light is switched off, if:

no more movement is detected in the detection area and the run-on time has elapsed or

the ambient light is too bright and the run-on time has elapsed.

To avoid any switch-on caused by a cooling illuminant, no movement signals are evaluated for a

brief lockout time after switching off. The motion detector adjusts itself to the ambient conditions

to keep the time as short as possible.

1 / 10

3259960304.05.2018

J0082599603

Product specificaties